共找到 781 条与 轻金属及其合金分析方法 相关的标准,共 53 页
本标准规定了铝及铝合金中铍含量的测定方法。 本标准适用于铝及铝合金中铍含量的测定。测定范围:0.00010%~0.40%。
Aluminium and aluminium alloys--Determination of beryllium content--SCR spectrophotometric method
本标准规定了铝及铝合金中锰含量的测定方法。 本标准适用于铝及铝合金中锰含量的测定。测定范围:0.004%~1.80%。
Aluminium and aluminium alloys--Determination of manganese content--Potassium periodate spectrophotometric method
Standard method for direct reading spectromertric analysis of aluminum and its alloys
本标准规定了按铝及铝合金阳极氧化膜在磷-铬酸溶液中浸蚀后的质量损失评定其封孔质量的方法。 本标准规定了评定铝及铝合金阳极氧化膜封孔质量的仲裁方法。 本标准适用于暴露在大气中的、在腐蚀介质中起保护作用的并偏重抗污染的阳极氧化膜。 本标准不适用于经下列工艺处理的阳极氧化膜; a.通常不进行封孔处理的硬质阳极氧化膜; b.仅在重铬酸盐溶液中封孔处理过的阳极氧化膜; c.经疏水处理的阳极氧化膜。 本方法属破坏性试验。
Anodizing of aluminium and its alloys.Assessment of quality of sealed anodic oxide coatings
本标准规定了铝及铝合金着色阳极氧化膜色差和外观质量的检测方法。 本标准适用于铝及铝合金着色阳极氧化膜产品色差和外观质量的检测。
Anodizing of aluminium and its alloys.Testing method for anodic oxide coating
本标准规定了按铝及铝合金阳极氧化膜在乙酸-乙酸钠或酸化亚硫酸钠溶液中浸蚀后的质量损失评定其封孔质量的方法。 本标准适用于暴露在大气中的、在腐蚀介质中起保护作用的并偏重抗污染的阳极氧化膜。 本标准不适用于经下列工艺处理的阳极氧化膜: a.通常不进行封孔处理的硬质阳极氧化膜; b.经疏水处理的阳极氧化膜; c.仅在重铬酸盐溶液中处理的阳极氧化膜。 本方法属破坏性试验。
Anodizing of aluminium and its alloys.Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution
本标准规定了镁合金中锌含量的测定方法。 本标准适用于镁合金中锌含量的测定。测定范围1上标〕:0.1%~7%。
Magnesium and its alloys--Determination of zinc content--Flame atomic absorption spectrometric method
本标准规定了镁及镁合金中镍含量的测定方法。 本标准适用于镁及镁合金中镍含量的测定。测定范围:0.0005%~0.05%。
Magnesium and its alloys--Determination of nickel content--Dimethylyoxime spectrophotometric method
本标准规定了镁及镁合金中铜含量的测定方法。 本标准适用于镁及镁合金中铜含量的测定。测定范围:0.003%~0.07%。
Magnesium and its alloys--Determination of copper content-2,9-dimethyl-1,10-phenanthroline spectrophotometric method
本标准规定了镁合金中铍含量的测定方法。 本标准适用于镁合金中铍含量的测定。测定范围:0.005%~0.02%。
Magnesium and its alloys--Determination of beryllium content--Solochrome cyanine R Spectrophotometric method
本标准规定了镁及镁合金中硅含量的测定方法。 本标准适用于镁及镁合金中硅含量的测定。测定范围:0.005%~0.15%。
Magnesium and its alloys--Determination of silicon content--Molybdenum blue spectrophotometric method
本标准规定了镁及镁合金中铁含量的测定方法。 本标准适用于镁及镁合金中铁含量的测定。测定范围:0.01%~0.1%。
Magnesium and its alloys--Determination of iron content--Orthophenanthroline spectrophotometric method
本标准规定了镁合金中铈含量的测定方法。 本标准适用于镁合金中铈含量的测定。测定范围:0.1%~0.5%。
Magnesium and its alloys--Determination of cerium content--Tribromoarsenazo spectrophotometric method
本标准规定了镁合金中锆含量的测定方法。 本标准适用于镁合金中锆含量的测定。测定范围:0.1%~0.7%。
Magnesium and its alloys--Determination of zirconium content--Xylenol orange spectrophotometric method
本标准规定了镁合金(含锆、稀土)中锰含量的测定方法。 本标准适用于镁合金(含锆、稀土)中锰含量的测定。测定范围:0.1%~2.7%。
Magnesium and its alloys--Determination of manganese content--Periodate spectoophotometric method
本标准规定了镁合金中铝含量的测定方法。 本标准适用于镁合金中铝含量的测定。测定范围:1.5%~12%。 本标准不适用于含锆、钍或稀土的镁合金。
Magnesium and its alloys--Determination of aluminium content
本标准叙述了萃取分离原子吸收分光光度法测定金属钙中铁、镍、铜、锰的原理,规定了分析步骤、结果计算及方法的精密度。 本标准适用于金属钙产品系列中较低含量的铁、镍、铜、锰的测定。
Method for analysis of calcium metal--The determination of iron,nickel,copper and manganese in calcium metal by atomic absorption spectrophotometry after extractive separation
本标准叙述了金属钙中氮的测定范围、原理,并规定了分析步骤、计算结果及方法精密度。 本标准适用于金属钙产品中氮的测定,测定范围:50~4500μg/g。
Method for analysis of calcium metal--The determination of nitrogen by distillation--Nessler reagent photometric method
本标准叙述了金属钙中铝的测定原理,并规定了分析步骤,结果计算及方法精密度。 本标准适用于金属钙中铝的测定,测定范围:10~1000μg/g,杂质允许量(mg/g),Fe1.5,Cu3.0,Mn1.0,Nil.0,Cr0.3,Co0.3,Mg10.0。
Method for analysis of calcium metal--The determination of aluminium by oxine chloroform extraction photometric method
本标准叙述了原子吸收法直接测定金属钙中铁、镍、铜、锰、镁的原理,规定了分析步骤,结果计算及方法的精密度。 本标准适用于金属钙产品系列Ca-03,Ca-1,Ca-2及Ca-3中铜、锰、镁含量的测定;Ca1,Ca-2及Ca-3中铁、镍含量的测定。
Method for analysis of calcium metal--The direct determination of iron,nickel,copper,manganese and magnesium in calcium metal by atomic absorption spectrometry
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号