H16 粉末冶金分析方法 标准查询与下载

ASTM B527-15 金属粉末和化合物振实密度的标准试验方法

4.1 This test method covers the evaluation of the tap density physical characteristic of metal powders and related compounds. The degree of correlation between the results of this test method and the quality of powders in use will vary with each particular application and has not been fully determined. 1.1 This test method specifies a method for the determination of tap density (packed density) of metal powders and compounds, that is, the density of a powder that has been tapped, to settle contents, in a container under specified conditions. 1.2 With the exception of the values for density and the mass used to determine density, for which the use of the gram per cubic centimetre (g/cm3) and gram (g) units is the long-standing industry practice, the values in SI units are to be regarded as standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Tap Density of Metal Powders and Compounds

NF A95-113:2014 金属粉末.用校准漏斗(霍尔流量计)测定流动率

La présente Norme internationale spécifie une méthode de détermination du taux d'écoulement des poudres métalliques, y compris les poudres pour métaux-durs, au moyen d'un entonnoir calibré (appareil de Hall).La méthode n'est applicable qu'aux poudres qui s'écoulent librement par l'orifice d'essai spécifié.

Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)

YS/T 1009-2014 烧结金属多孔材料 剪切强度的测定

本标准规定了烧结金属多孔材料剪切强度的检测方法。本标准适用于粉末冶金方法生产的烧结金属多孔板材剪切强度的测定。

Sintered metal porous materials.Determination of shear strength

YS/T 1010-2014 烧结金属多孔材料环拉强度的测定

本标准规定了烧结金属多孔材料环拉强度的测定方法。本标准适用于粉末冶金方法生产的烧结金属多孔管材。

Test method for ring tensile strength of sintered porous metal

YS/T 969-2014 镍钛形状记忆合金丝材恒温拉伸试验方法

本标准规定了镍钛形状记忆合金丝材恒温拉伸试验方法。本标准适用于具有超弹性能和记忆性能的镍钛形状记忆合金丝材。

Method of constant temperature tensile test for nickel-titanium shape memory alloy wires

YS/T 970-2014 镍钛形状记忆合金相变温度测定方法

本标准规定了镍钛形状记忆合金相变温度测定方法——弯曲和自由回复法。本标准适用于通过测量热相变过程的回复变形量测定马氏体逆相变相变温度,适用于马氏体逆相变终了温度A介于-25 ℃~90 ℃的完全退火态或热处理态丝材、管材或者带材。

Phase change temperature measuring method for nickel-titanium shape memory alloys

YS/T 904.3-2013 铁铬铝纤维丝化学分析方法 第3部分:硅、锰、钛、铜、镧、铈量的测定 电感耦合等离子体原子发射光谱法

YS/T 904的本部分规定了铁铬铝纤维丝中硅、锰、钛、铜、镧、铈量的测定方法。本部分适用于铁铬铝纤维丝中硅、锰、钛、铜、镧、铈量的测定,测定范围见表1。

Methods for chemical analysis of iron-chromium-aluminum fiber.Part 3:Determination of silicon、manganese、titanium、copper、lanthanum and cerium content.Inductively coupled plasma atomic emission spectrometry

YS/T 904.4-2013 铁铬铝纤维丝化学分析方法 第4部分:磷量的测定 钼蓝分光光度法

YS/T 904的本部分规定了铁路铝纤维丝中磷量的测定方法。本部分适用于铁铬铝纤维丝中磷量的测定,测定范围0.001%~0.050%。

Methods for chemical analysis of iron-chromium-aluminum fiber.Part 4:Determination of phosphorus content.Molybdenum blue spectrophotometry

YS/T 904.2-2013 铁铬铝纤维丝化学分析方法 第2部分:铬、铝量的测定 电感耦合等离子体原子发射光谱法

YS/T 904的本部分规定了铁铬铝纤维丝中铬、铝量的测定方法。本部分适用于铁铬铝纤维丝中铬、铝量的测定,铬测定范围为10.00%~30.00%,铝测定范围为2.00%~10.00%。

Methods for chemical analysis of iron-chromium-aluminum fiber.Part 2:Determination of chromium and aluminum content.Inductively coupled plasma atomic emission spectrometry

YS/T 904.1-2013 铁铬铝纤维丝化学分析方法 第1部分:氮量的测定 惰性气体熔融热导法

YS/T 904的本部分规定了铁铬铝纤维丝中氮量的测定方法。本部分适用于铁铬铝纤维丝中氮量的测定,测定范围:0.000 5%~0.040%。

Methods for chemical analysis of iron-chromium-aluminum fiber.Part 1:Determination of nitrogen content.Inert gas fusion thermal conductivity method

YS/T 904.5-2013 铁铬铝纤维丝化学分析方法 第5部分:碳、硫量的测定 高频燃烧红外吸收法

YS/T 904的本部分规定了铁铬铝纤维丝中碳量和硫量的测定方法。本部分适用于铁铬铝纤维丝中碳量和硫量的测定,碳量测定范围为0.005%~0.50%,硫量测定范围为 0.000 5%~0.050%。

Methods for chemical analysis of iron-chromium-aluminum fiber.Part 5:Determination of carbon and sulfur content.High-frequency infrared absorption method

DIN EN ISO 4491-4:2013 金属粉末.利用还原法测定氧含量.第4部分:利用还原萃取法测定总氧量(ISO 4491-4-2013).德文版本EN ISO 4491-4-2013

Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction (ISO 4491-4:2013); German version EN ISO 4491-4:2013

DIN EN ISO 13517:2013 金属粉末.利用带刻度漏斗进行流量的测定(古斯塔弗森流量计)(ISO 13517-2013).德文版本EN ISO 13517-2013

Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013); German version EN ISO 13517:2013

NF A95-181-4:2013 金属粉末.使用还原法测定氧含量.第4部分:使用还原萃取法测定总氧量

Metallic powders - Determination of oxygen content by reduction methods - Part 4: total oxygen by reduction-extraction

EN ISO 3326:2013 硬质合金.(磁化)矫顽磁力的测定

This International Standard specifies a method of determining (the magnetization) coercivity of hardmetals containing not less than 3 % of a ferromagnetic binder by mass.

Hardmetals - Determination of (the magnetization) coercivity

ISO 3326:2013 硬质合金(磁化)矫顽(磁)力的测定

This International Standard specifies a method of determining (the magnetization) coercivity of hardmetals containing not less than 3% of a ferromagnetic binder by mass.

Hardmetals.Determination of (the magnetization) coercivity

DIN EN ISO 4492:2013 硬金属粉末除外的金属粉末.压缩和烧结相关尺寸变化的测定(ISO 4492-2013).德文版本EN ISO 4492-2013

Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2013); German version EN ISO 4492:2013

BS EN ISO 4491-4:2013 金属粉末.用还原法测定氧含量.用还原萃取法测定总氧量

Metallic powders. Determination of oxygen content by reduction methods. Total oxygen by reduction-extraction

BS EN ISO 13517:2013 金属粉末.通过校准过的漏斗测定流量(古斯塔弗森流量计)

Metallic powders. Determination of flowrate by means of a calibratedfunnel (Gustavsson flowmeter)

ISO 4491-4:2013 金属粉末.用还原法测定氧含量.第4部分:用还原萃取法测定总氧量

This part of ISO 4491 specifies a method for the determination of the total oxygen content of metallic powders by reduction-extraction at high temperature.

Metallic powders.Determination of oxygen content by reduction methods.Part 4: Total oxygen by reduction-extraction