H20 金属理化性能试验方法综合 标准查询与下载

BS ISO 7539-8:2000 金属和合金的腐蚀.应力腐蚀试验.焊件评定用试样的制备和使用

This part of ISO 7539 covers the procedures available for stress corrosion testing of welded specimens and examines the additional factors which must be taken into account when conducting tests on welded specimens. In particular this part of ISO 7539 gives recommendations for the choice of specimens and test procedures to determine the resistance of a metal to stress corrosion when it is welded. The term "metal", as used in this part of ISO 7539, includes alloys.

Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of specimens to evaluate weldments

ISO 7539-8:2000 金属与合金的腐蚀 应力腐蚀试验 第8部分:评估焊件试样的制备和使用

This part of ISO 7539 covers the procedures available for stress corrosion testing of welded specimens and examines the additional factors which must be taken into account when conducting tests on welded specimens. In particular this part of ISO 7539 gives recommendations for the choice of specimens and test procedures to determine the resistance of a metal to stress corrosion when it is welded. The term "metal", as used in this part of ISO 7539, includes alloys.

Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments

ASTM E517-00 金属薄板塑性应变率γ的标准试验方法

1.1 This test method covers special tension testing for the measurement of the plastic strain ratio, r, of sheet metal intended for deep-drawing applications. 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI equivalents may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Plastic Strain Ratio r for Sheet Metal

ASTM E394-00 用1,10-菲咯啉法测定痕量铁值的标准试验方法

1.1 This test method covers the determination of iron in the range from 1 to 100 [mu]g. 1.2 This test method is intended to be general for the final steps in the determination of iron and does not include procedures for sample preparation. 1.3 This test method is applicable to samples whose solutions have a pH less than 2. It is assumed that the pH is adjusted to within this range in the sample preparation. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method

ASTM E394-00(2004) 用1,10-菲咯啉法测定痕量铁值的标准试验方法

This test method is suitable for determining trace concentrations of iron in a wide variety of products, provided that appropriate sample preparation has rendered the iron and sample matrix soluble in water or other suitable solvent (see 10.1 and Note 6). This test method assumes that the amount of color developed is proportional to the amount of iron in the test solution. The calibration curve is linear over the specified range. Possible interferences are described in Section 5.1.1 This test method covers the determination of iron in the range from 1 to 100 956;g.1.2 This test method is intended to be general for the final steps in the determination of iron and does not include procedures for sample preparation.1.3 This test method is applicable to samples whose solutions have a pH less than 2. It is assumed that the pH is adjusted to within this range in the sample preparation.1.4 Review the current material safety data sheets (MSDS) for detailed information concerning toxicity, first-aid procedures, handling, and safety precautions.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method

ASTM E517-00(2006)e1 金属薄板塑性应变率γ的标准试验方法

1.1 This test method covers special tension testing for the measurement of the plastic strain ratio, r, of sheet metal intended for deep-drawing applications.1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Plastic Strain Ratio r for Sheet Metal

ISO 8044:1999 金属与合金的腐蚀 基本术语和定义 三种语言版

This European Standard defines terms relating to corrosion that are widely used in modern science and technology. In addition, some definitions are supplemented with short explanations. NOTE 1 Throughout the document IUPAC rules for electrode potential signs are applied. The term "metal" is also used to include alloys and other metallic materials. NOTE 2 Terms and definitions related to inorganic surface treatment of metals are given in prEN 12508 Corrosion protection of metals and alloys — Surface treatment, metallic and other inorganic coatings — Vocabulary.

Corrosion of metals and alloys - Basic terms and definitions

ASTM E566-99 黑色金属的电磁(涡电流)分级

1.1 This practice covers the procedure for sorting ferrous metals using the electromagnetic (eddy-current) method. The procedure relates to instruments using absolute or comparator-type coils for distinguishing variations in mass, shape, conductivity, permeability, and other variables such as hardness and alloy that affect the electrical or magnetic properties, or both, of the material. The selection of samples to determine sorting feasibility and to establish calibration standards is also included. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals

ASTM E566-99(2004)e1 黑色金属的电磁(涡电流)分级

Absolute and comparative methods provide a means for sorting large quantities of ferrous parts of stock with regard to composition, condition, structure, or processing, or a combination thereof. The comparative or two-coil method is used when high-sensitivity testing is required. The advantage of this method is that it almost completely suppresses all internal or external disturbances such as temperature variations or stray magnetic fields. The two-coil method is normally used when harmonic evaluation is employed for sorting. The ability to accomplish satisfactorily these types of separations is dependent upon the relation of the magnetic characteristics of the ferromagnetic parts to their physical condition. These methods may be used for high-speed sorting in a fully automated setup where the speed of testing may approach ten specimens per second depending on their size and shape. The success of sorting ferromagnetic material depends mainly on the proper selection of magnetic field strength and frequency of signal in the test coil, fill factor, and variables present in the sample. The degree of accuracy of a sort will be affected greatly by the coupling between the test coil field and the test specimen and the accuracy with which the specimen is held in the test coil field during the measuring period. When high currents are used in the test coil, a means should be provided to maintain a constant temperature of the reference specimen in order to minimize measurement drift.1.1 This practice covers the procedure for sorting ferrous metals using the electromagnetic (eddy-current) method. The procedure relates to instruments using absolute or comparator-type coils for distinguishing variations in mass, shape, conductivity, permeability, and other variables such as hardness and alloy that affect the electromagnetic or magnetic properties of the material. The selection of specimens to determine sorting feasibility and to establish standards is also included.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals

ASTM G40-99 有关侵蚀和磨损的标准术语

1.1 The terms and their definitions given herein represent terminology relating to wear and erosion of solid bodies due to mechanical interactions such as occur with cavitation, impingement by liquid jets or drops or by solid particles, or relative motion against contacting solid surfaces or fluids. This scope interfaces with but generally excludes those processes where material loss is wholly or principally due to chemical action and other related technical fields, as, for instance, lubrication. 1.2 This terminology is not exhaustive; the absence of any particular term from this collection does not necessarily imply that its use within this scope is discouraged. However, the terms given herein are the recommended terms for the concepts they represent unless otherwise noted. 1.3 Certain general terms and definitions may be restricted and interpreted, if necessary, to make them particularly applicable to the scope as defined herein. 1.4 The purpose of this terminology is to encourage uniformity and accuracy in the description of test methods and devices and in the reporting of test results in relation to wear and erosion. Note 18212;All terms are listed alphabetically. When a subsidiary term is defined in conjuntion with the definition of a more generic term, and alphabetically-listed cross-reference is provided.

Standard Terminology Relating to Wear and Erosion

JIS G 0561:1998 钢的淬透性试验方法(末端淬火法)

Method of hardenability test for steel (End quenching method)

JIS G 0556:1998 钢的宏观条痕试验方法

この規格は，肉眼又は10倍以下の拡大レンズによる圧延又は鍛造された鋼の段削り地きず試験方法及びマクロ試験による非金属介在物評価方法について規定する。

Method of macro-streak-flaw test for steel

DIN EN ISO 3651-1:1998 不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.用质量损失测量法在硝酸介质中的进行腐蚀试验(晶间腐蚀试验)

The document specificies a method for the determination of the resistance to intergranular corrosion of austenitic and ferritic-austenitic(duplex) stainless steels in a nitric acid medium by measurement of the loss in mass (Huey test).

Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998); German v

DIN EN ISO 3651-2:1998 不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.在含硫酸介质中进行腐蚀试验

The document specificies methods for the determination of the resistance to intergranular corrosion of ferritic, austenitic and ferritic-austenitic(duplex) stainless steels in a media containing sulphuric acid.#,,#

Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998); German version EN ISO 3651-2:

DIN EN ISO 11306:1998 金属和合金的腐蚀.金属和合金暴露于海水表面及评定指南

The document gives guidance on the conditions and procedures to be followed when conducting exposures of metals and alloys in surface water such that meaningful comparisons by be made for different locations.

Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water (ISO 11306:1998); German version EN ISO 11306:1998

ARMY MIL-HDBK-1884-1998 等离子喷涂沉淀法

This commercial item description covers brown kraft paper used for general wrapping applications.

COATING, PLASMA SPRAY DEPOSITION

ASTM E1139-97 金属压力面产生的声辐射的连续监测

1.1 This practice provides guidelines for continuous monitoring of acoustic emission (AE) from metal pressure boundaries in industrial systems during operation. Examples are pressure vessels, piping, and other system components which serve to contain system pressure. Pressure boundaries other than metal, such as composites, are specifically not covered by this document. 1.2 The functions of AE monitoring are to detect, locate, and characterize AE sources to provide data to evaluate their significance relative to pressure boundary integrity. These sources are those activated during system operation, i.e., no special stimulus is applied to produce AE. Other methods of nondestructive testing (NDT) may be used, when the pressure boundary is accessible, to further evaluate or substantiate the significance of detected AE sources. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 6.

Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries

ISO/TR 12735-2:1996 金属的机械试验 用于定义的符号 第2部分:制定符号和定义的建议

Contains recommendations on the choice of definitions and symbols to be used in International Standards for methods of mechanical testing of metallic materials.

Mechanical testing of metals - Symbols used with their definitions - Part 2: Recommendations for the development of symbols and definitions

ISO/TR 12735-1:1996 金属的机械试验 用于定义的符号 第1部分:出版的标准中用符号和定义

Enumerates the symbols and definitions used in published International Standards for specific methods of mechanical testing of metallic materials which are the responsibility of ISO TC 164.

Mechanical testing of metals - Symbols used with their definitions - Part 1: Symbols and definitions in published standards

ASTM G141-96 非金属材料曝光测试中寻址易变性的标准导则

1.1 This guide covers information on sources of variability and strategies for its reduction in exposure testing, and for taking variability into consideration in the design, execution, and data analysis of both exterior and laboratory accelerated exposure tests. 1.2 The values stated in either inch-pound or SI units are to be regarded separately as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials