H23 金属工艺性能试验方法 标准查询与下载
共找到 354 条与 金属工艺性能试验方法 相关的标准，共 24 页
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015); German version EN ISO 14577-2:2015
- ICS
- 19.060;77.040.10
- CCS
- H23
- 发布
- 2015-11
- 实施
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2015-11
- 实施
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2015-11
- 实施
Gas cylinders — Refillable seamless steel tubes of water capacity between 150 L and 3 000 L — Design, construction and testing
- ICS
- 23.020.30
- CCS
- H23
- 发布
- 2015-06-15
- 实施
Metallic materials. Knoop hardness test. Part 1. Test method
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2015
- 实施
- 2016-01-01
Metallic materials. Knoop hardness test. Part 4. Table of hardness values
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2015
- 实施
- 2016-01-01
Metal composites. Method for determination of tensile properties of fiber reinforced metal matrix composites
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2015
- 实施
- 2017-01-01
Stress corrosion cracking testing of metals and alloys using reverse U-bend test method
- ICS
- 77.060
- CCS
- H23
- 发布
- 2014-10-20
- 实施
Metallic materials. Ductility testing. High speed compression test for porous and cellular metals
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2014-05-31
- 实施
- 2014-05-31
本标准规定了金属材料顶锻试验方法的原理、符号、试样、试验设备、试验程序、试验结果评定和试验报告。本标准适用于下列横截面尺寸(直径、边长或内切圆直径)范围的金属材料:对于冷顶锻试验为5mm~30mm,对于热顶锻试验为5mm~200mm。对于超出本标准适用范围的金属材料,应符合相关产品标准或协议的规定。
Metallic materials.Forging test
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2014-05-06
- 实施
- 2014-10-01
This International Standard specifies methods for high speed compression testing, at room temperature, of porous and cellular metals having a porosity of 50 % or more. The speed range applicable to this test method is 0,1 m/s to 100 m/s (or 1 s−1 to 103 s−1 in terms of the initial strain rate when the specimen height is 100 mm).
Metallic materials - Ductility testing - High speed compression test for porous and cellular metals
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2014-05
- 实施
This Japanese Industrial Standard specifies the bend test method for determining the bendability at room temperature for the symbol of MPlB among the magnesium alloy sheets and plates (hereafter referred to as "sheet") and the magnesium alloy strips and coiled sheets (hereafter referred to as "strip") specified in JIS H 4201 having the thickness of 0.5 mm to 1.0 mm.
Testing method of determining bendability for magnesium alloy sheets
- ICS
- 77.120.20
- CCS
- H23
- 发布
- 2014-03-20
- 实施
This Standard specifies a step-down test method, blue fracture test method and magnetic particle inspection method to assess the non-metallic inclusions in rolled or forged steel with the naked eye or using a magnifying glass with a magnification of not more than×10.
Method of macro-streak-flaw test for steel
- ICS
- 77.040.99
- CCS
- H23
- 发布
- 2014-03-20
- 实施
This International Standard specifies the criteria for through-thickness reduction of area properties specified in the direction of thickness perpendicular to the surface. This International Standard also specifies the test conditions by which conformance to the specified criteria is evaluated. This International Standard applies to fully killed steel with a specified minimum yield strength or proof strength ≤960 MPa and supplied as plates, wide flats, or sections of thickness from 15 mm to 400 mm. The application of this International Standard to products 400 mm or having minimum specified yield strengths or proof strengths >960 MPa will be the subject of agreement when ordering. The requirements of this International Standard supplement other International Standards that specify the qualities of products (plate, wide flats, and sections).
Through-thickness characteristics for steel products
- ICS
- 77.140.50
- CCS
- H23
- 发布
- 2014-03
- 实施
Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013); German version EN ISO 20482:2013
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2014-03
- 实施
Metallic materials - Tube - Ring tensile test (ISO 8496:2013); German version EN ISO 8496:2013
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2014-03
- 实施
이 표준은 재충전용으로 내용적이 150 L 이상 3 000 L 이하로, 세계의 극한 주변 온도 범위에 노출되어(일반적으로 -50∼+65 ℃ 사이) 압축 및 액화 가스를 충전하는 퀜칭 및 템퍼링 열처리된 이음매없는 강관의 재료, 설계, 제작, 가공, 제조 공정 및 시험에 대한 최소 요건을 규정한다. 이 표준은 최대 인장 강도(Rm)가 1 100 MPa 미만의 관에 대하여 적용한다.이 실린더들은 단독으로 쓰이거나 또는 압축 가스의 운송과 배송용 트레일러나 지륜 장치에 충전 장비로 사용될 수 있다.이 표준에서는 사용 중 또는 운송 시 가한 다른 추가 응력(예를 들어 굽힘 응력 등)은 고려하지 않는다.
Gas cylinders-Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 L and 3 000 L-Design construction and testing
- ICS
- 23.020.30
- CCS
- H23
- 发布
- 2013/9/30
- 实施
- 2013/9/30
Metallic materials. Wire. Wrapping test
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2013-12-31
- 实施
- 2013-12-31
Metallic materials. Tube. Ring-expanding test
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2013-11-30
- 实施
- 2013-11-30
Metallic materials. Tube. Flattening test
- ICS
- 77.040.10
- CCS
- H23
- 发布
- 2013-11-30
- 实施
- 2013-11-30
