H25 金属化学性能试验方法 标准查询与下载

ISO 9224:2012 金属与合金的腐蚀 大气腐蚀性 腐蚀等级的指导值

Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories

ISO 9223:2012 金属与合金的腐蚀 大气腐蚀性 分类,检测,评价

Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation

ISO 9225:2012 金属与合金的腐蚀.大气腐蚀性.影响大气腐蚀性的环境参数测定

Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres

ISO 17474:2012 金属与合金的腐蚀.腐蚀测试中电化学测量的适用规则

Corrosion of metals and alloys - Conventions applicable to electrochemical measurements in corrosion testing

JIS G 0573 AMD 1:2012 不锈钢的65%硝酸腐蚀试验方法(修改件1)

Method of 65 % nitric acid test for stainless steels (Amendment 1)

JIS G 0576 AMD 1:2012 不锈钢的氯化物溶液应力腐蚀破裂试验(修改件1)

Stress corrosion cracking test in chloride solution for stainless steels (Amendment 1)

JIS G 0591 AMD 1:2012 不锈钢的硫酸试验方法(修改件1)

Method of sulfuric acid test for stainless steels (Amendment 1)

JIS G 0575 AMD 1:2012 不锈钢的硫酸-硫酸铜腐蚀试验方法(修改件1)

Method of copper sulfate-sulfuric acid test for stainless steels (Amendment 1)

NF A05-115-1:2012 铜和铜合金.测量圆形铜或铜合金管无缝缺陷的涡流试验.第2部分:使用内表面上内部测试探针的试验

Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1 : test with an encircling test coil on the outer surface.

NF A05-115-2:2012 铜和铜合金.测量圆形铜或铜合金管无缝缺陷的涡流试验.第2部分:使用内表面上内部测试探针的试验

Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2 : test with an internal test probe on the inner surface.

DIN EN ISO 7539-6:2012 金属及合金的腐蚀.应力腐蚀试验.第6部分:恒定负载或恒定排量试验用预制裂纹试样的制备及使用(ISO 7539-6-2011).德文版 EN ISO 7539-6-2011

Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement (ISO 7539-6:2011); German version EN ISO 7539-6:2011

ASTM G160-12 用实验室土葬法评估非金属材料微生物易感性的标准实施规程

3.1 These results may be used to compare the susceptibility of materials when exposed to this test procedure. 3.2 Microbiological susceptibility may be reflected by a number of changes including staining, weight loss, or reduction in tensile or flexural strength. 3.3 This practice may be considered an inoculation with a mixed culture of fungi and bacteria. 1.1 This practice is limited to the method of conducting an evaluation of a nonmetallic material's microbiological susceptibility when in contact with the natural environment of the soil under use conditions. This practice is intended for use on solid material test specimens that are no larger than approximately 2 cm (0.79 in.) thick and 100 cm 2 (15.5 in.2) or on film forming materials such as coatings which may be tested in the form of films at least 50 by 50 mm (2 by 2 in.) in size. This practice may be applied to articles that do not spend the majority of their service life in soil. 1.2 A wide variety of properties may be affected by microbial attack depending on material or item characteristics. Standard methods (where available) should be used for each different property to be evaluated. This practice does not attempt to enumerate all of the possible properties of interest nor specify the most appropriate test for those properties. Test methods must, however, be appropriate to the material being tested. 1.3 Materials intended for use in soil burial applications are often subjected to periods of exposure to solar radiation and other elements of weather for some time before they are buried. Because these exposures may alter the ability of a material to resist the effects of soil-borne microorganisms, it is recommended that this practice be combined with appropriate environmental exposures (for example, solar simulating weathering devices, the hydrolytic effects of extended aqueous contact, or extraneous nutrients) or fabrication into articles (for example, adhesive bonding of seams) which may promote microbiological susceptibility during the service life of the material. 1.4  The values stated in SI units are to be regarded as standard. The values given in parentheses are provided for information purposes only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial

ASTM D1838-12 以液化石油气(LP)确定铜条腐蚀性的标准试验方法

1.1 This test method covers the detection of the presence of components in liquefied petroleum gases which can be corrosive to copper. Note 1???For an equivalent copper strip test applicable to less volatile petroleum products, see Test Method D130. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 7.1, 10.3.1, and Annex A1.

Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

GOST R 55143-2012 金属材料的熔焊质量要求. 第6部分. ISO 3834实施指南

Quality requirements for fusion welding of metallic materials. Part 6. Guidelines on implementing ISO 3834

NF A05-501-6:2011 金属和合金的腐蚀.应力腐蚀试验.第6部分:恒定负荷或恒定位移条件下试验用预破裂试样的制备和使用

Corrosion of metals and alloys - Stress corrosion testing - Part 6 : preparation and use of precracked specimens for tests under constant load or constant displacement.

BS EN ISO 7539-6:2011 金属和合金的腐蚀.应力腐蚀试验.恒定负荷或恒定位移条件下试验用预破裂试样的制备和使用

Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of precracked specimens for tests under constant load or constant displacement

ISO 7539-6:2011 金属和合金的腐蚀.应力腐蚀测试.第6部分:载荷和位移恒定条件下预开裂试样的制备和使用

Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement

SN/T 3009-2011 金属表面海水腐蚀扫描电镜鉴定方法

本标准规定了用扫描电子显微镜及X射线能谱仪鉴定金属表面海水腐蚀法的技术要求和规范。 本标准适用于铁基金属材料及产品常见的海水腐蚀鉴定分析,非铁基金属海水腐蚀鉴定可参照执行。

Identification of seawater corrosion on metallic surface by SEM

DIN EN ISO 10270:2011 金属和合金的腐蚀.用于核动力反应堆的锆合金水腐蚀试验(ISO 10270-1995+Cor. 1-1997);德文版本EN ISO 10270-2008

Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995+Cor. 1:1997); German version EN ISO 10270:2008

DIN EN ISO 8565:2011 金属和合金.大气腐蚀试验.一般要求(ISO 8565-2011);德文版本EN ISO 8565-2011

Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011); German version EN ISO 8565:2011