H26 金属无损检验方法 标准查询与下载
共找到 1511 条与 金属无损检验方法 相关的标准，共 101 页
Ultrasonic testing method for directional energy deposition metal forming parts in additive manufacturing
- ICS
- CCS
- H26
- 发布
- 实施
- 2023-12-28
本文件规定了钢轨涡流检测的原理、一般要求、对比试样、检测设备、检测程序、结果评定和检测报告。本文件适用于43kg/m～75kg/m对称断面和非对称断面钢轨的涡流检测，其他钢轨的涡流检测亦可参照执行。
Rail eddy current detection method
- ICS
- 77.140.20
- CCS
- H26
- 发布
- 2023-12-20
- 实施
- 2024-07-01
本文件适用于承压设备受压元件的制造、安装、在用检测中板及管的对接接头对接焊缝（以下简称对接焊缝）的射线数字成像检测。
Non-destructive testing of pressure equipment Part 11: Radiographic digital imaging testing
- ICS
- 77.040.20
- CCS
- H26
- 发布
- 2023-10-11
- 实施
- 2024-04-11
本文件适用于承压设备受压元件的制造、安装、在用检测中板及管的对接接头对接焊缝（以下简称对接焊缝）的射线计算机辅助成像检测。
Non-destructive testing of pressure equipment Part 14: Radiographic computer-aided imaging testing
- ICS
- 77.040.20
- CCS
- H26
- 发布
- 2023-10-11
- 实施
- 2024-04-11
本文件规定了模具钢超声检测的一般要求、对比试块、检测仪器和设备、检测条件和方法、缺陷的测定、质量分级和检测报告。 本文件适用于厚度不小于6 mm的模具钢的纵波直入射反射法手动和自动超声检测。圆棒类模具钢和其他非模具钢锻件、板材等的超声检测可参照本文件执行。
Ultrasonic testing method of mold steel
- ICS
- 77.140.20
- CCS
- H26
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了方形无缝钢管纵向和横向缺欠的自动超声横波检测的一般要求、检测方法、对比样管、设备的检验与复核、验收、检测报告。 本文件适用于边长40 mm×40 mm～500 mm×500 mm，壁厚3.0 mm～60 mm的方形无缝钢管。
Automatic ultrasonic testing method for square seamless steel pipes
- ICS
- 77.040.20
- CCS
- H26
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件适用于粉末冶金法制备的直径为16 mm～150 mm的钨、钼及其合金棒材的超声检测，以及外径为30 mm～100 mm且壁厚与外径比小于0.22的钨、钼及其合金管材的超声检测。
Ultrasonic testing methods for tungsten, molybdenum and their alloy rods and tubes
- ICS
- 77.16
- CCS
- H26
- 发布
- 2022-09-30
- 实施
- 2023-04-01
Magnetic particle testing method for hot-rolled steel
- ICS
- 77.040.20
- CCS
- H26
- 发布
- 2021-12-02
- 实施
- 2022-04-01
This document gives the rules of naming, technical requirements, test methods, inspection, marking signage, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT elec
Industrial non-destructive testing equipment - Electron linear accelerator
- ICS
- 19.100
- CCS
- H26
- 发布
- 2021-10-01
- 实施
Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials
- ICS
- 19.100
- CCS
- H26
- 发布
- 2021-06-02
- 实施
- 2021-10-01
Non-destructive testing - Penetrant testing - Part 1 : general principles
- ICS
- 19.100
- CCS
- H26
- 发布
- 2021-06-02
- 实施
- 2021-10-01
This document specifies a method of penetrant testing used to detect discontinuities, e.g. cracks, laps, folds, porosity and lack of fusion, which are open to the surface of the material to be tested using white light or UV-A (365 nm) radiation. It is mainly applied to metallic materials, but can also be performed on other materials, provided that they are inert to the test media and not excessively porous (castings, forgings, welds, ceramics, etc.) This document also includes requirements for process and control testing, but is not intended to be used for acceptance criteria. It gives neither information relating to the suitability of individual test systems for specific applications nor requirements for test equipment. NOTE 1 Methods for determining and monitoring the essential properties of penetrant testing products to be used are specified in ISO 3452-2 and ISO 3452-3. NOTE 2 The term "discontinuity" is used in this document in the sense that no evaluation concerning acceptability or non-acceptability is included. NOTE 3 CEN/TR 16638 addresses penetrant testing using actinic blue light.
Non-destructive testing - Penetrant testing - Part 1: General principles
- ICS
- 19.100
- CCS
- H26
- 发布
- 2021-05-00
- 实施
This document specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. This document covers the temperature range from 10 °C to 50 °C. Additional tests in ISO 3452-5 or ISO 3452-6 can be required outside this range. On-site control tests and methods are detailed in ISO 3452-1.
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
- ICS
- 19.100
- CCS
- H26
- 发布
- 2021-05-00
- 实施
Non-destructive testing of pressure equipment Part 15: Phased array ultrasonic testing
- ICS
- 19.100
- CCS
- H26
- 发布
- 2021-04-26
- 实施
- 2021-08-26
Automated eddy current examination of steel pipes and tubes
- ICS
- 23.040.10
- CCS
- H26
- 发布
- 2021-04-20
- 实施
Automated flux leakage examination of steel pipes and tubes
- ICS
- 23.040.10
- CCS
- H26
- 发布
- 2021-04-20
- 实施
Digital radiographic examination for the weld seam of welded steel tubes
- ICS
- 23.040.10
- CCS
- H26
- 发布
- 2021-03-22
- 实施
Radiographic examination with film for the weld seam of welded steel tubes
- ICS
- 23.040.10
- CCS
- H26
- 发布
- 2021-03-22
- 实施
Steel products -- Employer's qualification system for non-destructive testing (NDT) personnel
- ICS
- 03.100.30
- CCS
- H26
- 发布
- 2021-03-22
- 实施
The document is applied to the construction and testing of mobile apparatus for gamma-radiography.
Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources for gamma-radiography - Part 4: Construction and testing of mobile apparatus
- ICS
- CCS
- H26
- 发布
- 2021-03-00
- 实施
