H41 生铁 标准查询与下载
共找到 198 条与 生铁 相关的标准，共 14 页
Compacted (vermicular) graphite cast irons - Classification
- ICS
- 77.080.10
- CCS
- H41
- 发布
- 2017-02-01
- 实施
Cast irons. Determination of non-combined carbon content. Infrared absorption method after combustion in an induction furnace
- ICS
- 77.080.10
- CCS
- H41
- 发布
- 2016-12-31
- 实施
- 2016-12-31
Cast irons - Determination of non-combined carbon content - lnfrared absorption method after combustion in an induction furnace
- ICS
- 77.080.10
- CCS
- H41
- 发布
- 2016-12-01
- 实施
Cast-iron soil pipes and fittings
- ICS
- 77.140.75;77.140.80
- CCS
- H41
- 发布
- 2015-07-28
- 实施
Epoxy-powder coating for interior of ductile cast iron pipes and fitting
- ICS
- 23.040.10
- CCS
- H41
- 发布
- 2015-07-28
- 实施
本标准规定了离心球墨铸铁管用生铁的技术要求、试验方法、检验规则、运输和质量证明书。 本标准适用于离心球墨铸铁管用生铁、铁液。
Pig iron used for centrifugal ductile iron pipes
- ICS
- 77.080.10
- CCS
- H41
- 发布
- 2015-04-30
- 实施
- 2015-10-01
La présente norme Européenne s'applique aux aciers moulés utilisés :- en mécanique générale. Leur utilisation inclut l'équipement (mécanique, électrique...), l'industrie automobile, le ferroviaire, l'armement, les équipements agricoles, l'industrie minière, etc.
Steel casting - Steel castings for general engineering uses
- ICS
- 77.140.80
- CCS
- H41
- 发布
- 2015-04-04
- 实施
- 2015-04-04
1.1 This specification covers castings made of high-silicon molybdenum ferritic iron, commonly known as SiMo. This specification includes castings with microstructures of spheroidal graphite (SG) SiMo iron, compacted graphite (CG) SiMo iron, and mixed graphite or medium-nodularity graphite (MG) SiMo iron. MG iron microstructure comprises a mixture of spheroidal and compacted graphite shapes. This standard specifies the condition, chemical composition, microstructure, and other technical requirements of three grades of ferritic cast irons, specified as SG SiMo, MG SiMo, and CG SiMo. 1.2 No precise quantitative relationship can be stated between the properties of iron in the various locations of the same casting or between the properties of castings and those of a test specimen cast from the same iron. 1.3 The values stated in SI units are to be regarded as standard. All chemical compositions are in mass percentage. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings
- ICS
- 77.080.10
- CCS
- H41
- 发布
- 2015
- 实施
1.1 This specification covers carbon steel, alloy steel, and martensitic stainless steel castings that are to be subjected to higher mechanical stresses than those covered in Specification A27/A27M. 1.2 Several grades of steel castings are covered, having the chemical composition and mechanical properties prescribed in Tables 1 and 2. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3.1 Within the text, the SI units are shown in brackets.
Standard Specification for Steel Castings, High Strength, for Structural Purposes
- ICS
- 77.140.80
- CCS
- H41
- 发布
- 2015
- 实施
Epoxy-powder coating for interior of ductile cast iron pipes and fittings
- ICS
- CCS
- H41
- 发布
- 2014/12/31
- 实施
- 2014/12/31
Founding - Continuous cast iron bars; German version EN 16482:2014
- ICS
- 77.080.10
- CCS
- H41
- 发布
- 2014-09-01
- 实施
Founding. Continuous cast iron bars
- ICS
- 77.080.10
- CCS
- H41
- 发布
- 2014-06-30
- 实施
- 2014-06-30
1.1 This specification covers iron-chromium and iron-chromium-nickel alloy castings for general corrosion-resistant application. The grades covered by this specification represent types of alloy castings suitable for broad ranges of application which are intended for a wide variety of corrosion environments. Note 1—For alloy castings for severe corrosion-resistant service, reference should be made to Specification A744/A744M. For general heat-resistant alloy castings, reference should be made to Specification A297/A297M. For nickel alloy castings for corrosion-resistant service, reference should be made to Specification A494/A494M. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. Inch-pound units are applicable for material ordered to Specification A743 and SI units for material ordered to Specification A743M.
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
- ICS
- 77.140.80 (Iron and steel castings)
- CCS
- H41
- 发布
- 2013
- 实施
Founding - Continuous cast iron bars; German version prEN 16482:2012
- ICS
- 77.080.10
- CCS
- H41
- 发布
- 2012-10
- 实施
Founding - Malleable cast irons; German version EN 1562:2012
- ICS
- 77.080.10
- CCS
- H41
- 发布
- 2012-05-01
- 实施
Founding - Austenitic cast irons; German version EN 13835:2012
- ICS
- 77.080.10
- CCS
- H41
- 发布
- 2012-04-01
- 实施
Founding. Malleable cast irons
- ICS
- 77.080.10
- CCS
- H41
- 发布
- 2012-03-31
- 实施
- 2012-03-31
이 표준은 지중(땅속) 또는 지상에 배관하여 압력 또는 무압력에서 물의 수송 등에 사용하는
Ductile iron fittings
- ICS
- 23.040.10
- CCS
- H41
- 发布
- 2012-03-21
- 实施
- 2012-03-21
이 표준은 주철관(이하 관이라 한다.)의 내면에 시행하는 시멘트 모르타르 라이닝(이하 라이
Mortar lining for ductile iron pipes & fittings
- ICS
- 23.040.10
- CCS
- H41
- 发布
- 2012-03-21
- 实施
- 2012-03-21
