H53 电工用钢 标准查询与下载

GB/T 6984-1986 电磁纯铁热轧厚板技术条件

本标准适用于制造电磁元件用的热轧厚钢板。

Technical requirements for magnetic iron hot-rolled plates

GB/T 6983-1986 电磁纯铁棒材技术条件

本标准适用于供制造电磁元件用的热轧、锻制和冷拉电磁纯铁棒材，亦用于热轧圆管坯和钢坯。

Technical requirements for magnetic iron bars

IEC 60404-6:2021 磁性材料. 第6部分: 使用环形试样的频率范围在20至200kHz的软磁金属材料和粉末材料磁性能的测量方法

This part of IEC 60404 specifies methods for the measurement of AC magnetic properties of soft magnetic materials, other than electrical steels and soft ferrites, in the frequency range 20 Hz to 100 kHz. The materials covered by this part of IEC 60404 include those speciality all

Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

YB/T 4843-2020 工频用冷轧取向电工钢薄带（片）

Cold-rolled oriented electrical steel strip (sheet) for power frequency use

YB/T 4842-2020 大型发电机用冷轧取向电工钢带（片）

Cold-rolled oriented electrical steel strip (sheet) for large generators

JIS C 2553:2019 交付到全加工状态的冷轧晶粒取向电工钢薄板和钢带

Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state

JIS C 2550-4:2019 电工钢条和电工钢板试验方法. 第4部分: 测定电工钢条和电工钢板表面绝缘特性试验方法

Test methods for electrical steel strip and sheet -- Part 4: Methods of test for the determination of surface insulation resistance of electrical strip and sheet

JIS C 2550-3:2019 电工钢条和电工钢板试验方法. 第3部分: 中频时测量电工钢条和电工钢板磁特性测量方法

Test methods for electrical steel strip and sheet -- Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet at medium frequencies

IEC 60404-6:2018 磁性材料.第6部分:使用环形试样的频率范围在20至200kHz的软磁金属材料和粉末材料磁性能的测量方法

This part of IEC 60404 specifies methods for the measurement of AC magnetic properties of soft magnetic materials, other than electrical steels and soft ferrites, in the frequency range 20 Hz to 100 kHz. The materials covered by this part of IEC 60404 include those speciality alloys listed in IEC 60404-8-6, amorphous and nano-crystalline soft magnetic materials, pressed and sintered and metal injection moulded parts such as are listed in IEC 60404-8-9, cast parts and magnetically soft composite materials. The object of this part is to define the general principles and the technical details of the measurement of the magnetic properties of magnetically soft materials by means of ring methods. For materials supplied in powder form, a ring test specimen is formed by the appropriate pressing method for that material. The measurement of the DC magnetic properties of soft magnetic materials is made in accordance with the ring method of IEC 60404-4. The determinations of the magnetic characteristics of magnetically soft components are made in accordance with IEC 62044-3. NOTE IEC 62044-3:2000 specifies methods for the measurement of AC magnetic characteristics of magnetically soft components in the frequency range up to 10 MHz. Normally, the measurements are made at an ambient temperature of (23 ± 5) °C on test specimens which have first been magnetized, then demagnetized. Measurements can be made over other temperature ranges by agreement between parties concerned.

Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

IEC 60404-8-7:2017 磁性材料.第8-7部分:单项材料规格.以全加工状态交货的冷轧晶粒定向电工钢片和钢带

This part of IEC 60404 defines the grades of cold-rolled grain-oriented electrical steel strip and sheet in nominal thicknesses of 0,23 mm, 0,27 mm, 0,30 mm and 0,35 mm. In particular, it gives general requirements, magnetic properties, geometric characteristics, tolerances and technological characteristics, as well as inspection procedures. This document applies to Goss textured grain-oriented electrical steel strip and sheet supplied in the final annealed condition in coils or sheets, and intended for the construction of magnetic circuits. The grades are grouped into two classes: conventional grades; high permeability grades, including grades which may be delivered in the domain refined condition. They correspond to Class C22 of IEC 60404-1.

Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state

IEC 60404-8-8:2017 磁性材料.第8-8部分:单项材料规范.中频下用薄型电工钢带及薄板

This part of IEC 60404 defines the grades of thin non-oriented electrical steel strip and sheet in nominal thicknesses of 0,05 mm, 0,10 mm, 0,15 mm, 0,20 mm, 0,25 mm, 0,30 mm and 0,35 mm and of thin grain-oriented electrical steel strip and sheet in nominal thicknesses of 0,05 mm, 0,10 mm, 0,15 mm and 0,18 mm. In particular, it gives general requirements, magnetic properties, geometric characteristics and tolerances, technological characteristics, as well as inspection procedures. NOTE For thin non-oriented electrical steel strip and sheet, other nominal thicknesses (i.e. 0,12 mm, 0,18 mm, 0,23 mm and 0,27 mm) can be agreed between the manufacturer and the purchaser. This document applies to electrical steel strip and sheet supplied in the finally annealed condition in coils or sheets and intended for the construction of magnetic circuits predominantly used at frequencies in the range from 100 Hz to 10 kHz.

Magnetic materials - Part 8-8: Specifications for individual materials - Thin electrical steel strip and sheet for use at medium frequencies

DIN EN 61332:2017 软铁酸盐材料分类(IEC 61332-2016);德文版本EN 61332-2017

Soft ferrite material classification (IEC 61332:2016); German version EN 61332:2017

JIS C 2534:2017 半加工状态下交付的铁基非晶带材

Fe-based amorphous strip deliverd in the semi-processed state

ASTM A971/A971M-17 测量平轧电工钢卷材边缘和凸的标准试验方法

5.1 Flat-rolled electrical steel master coils are usually slit into narrower coils. Usually these slit coils are punched or sheared into laminations of various shapes. The laminations are then uniformly stacked to become the cores of magnetic devices such as motors and transformers. Stacking of many laminations exhibiting excessive taper causes assembly problems and poor appearance. Nonuniform stack lengths in motors cause imbalance and noise. When the laminations are interleaved in transformers, taper causes air spaces within the core resulting in increased noise, increased exciting current, and higher core loss. 1.1 This test method provides a procedure for measuring edge taper and crown of flat-rolled electrical steel coils as produced at the steel mill. 1.2 The values and equations stated in customary (cgs-emu and inch-pound) units or SI units are to be regarded separately as standard. Within this standard, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with this standard. 1.3 The following material specifications include requirements for edge taper or crown: A677, A683, A726, A876, and A1086. Specification A840 also includes requirements for edge taper or crown, but it has been withdrawn and reference to it is included for historical purposes. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils

IEC 60404-1:2016 磁性材料 第1部分:分类

This part of IEC 60404 is intended to classify commercially available magnetic materials. The term "magnetic materials" denotes substances where the application requires the existence of ferromagnetic or ferrimagnetic properties. In this document, the classification of magnetic materials is based upon the generally recognized existence of two main groups of products: soft magnetic materials (coercivity 1000 A/m); hard magnetic materials (coercivity >1 000 A/m). Within these main groups, the classification when appropriate recognizes the following characteristics; the main alloying element and the metallurgical state and physical properties of the material; when possible and convenient, the relationship between these characteristics is identified. A classification by specific areas of application cannot be applied to all materials because different materials can very often be used for the same application depending on the characteristics required.

Magnetic materials - Part 1: Classification

SN/T 4564-2016 电工钢片（带）晶粒取向性鉴定用金相试样制备方法

Preparation method of metallographic specimens for identification of grain orientation of electrical steel sheets (strips)

SN/T 4563-2016 电工钢片（带）晶粒取向性鉴定方法 金相法

Method for identification of grain orientation of electrical steel sheets (strips) Metallographic method

DIN EN 10303:2016 中等使用频率的薄磁性钢片材和带材;德文版本EN 10303-2015

Thin magnetic steel strip and sheet for use at medium frequencies; German version EN 10303:2015

DIN EN 60404-5:2016 磁性材料.第5部分:永久磁铁(硬磁)材料.磁性能的测量方法(IEC 60404-5-2015);德文版本EN 60404-5-2015

Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties (IEC 60404-5:2015); German version EN 60404-5:2015

YB/T 4517-2016 700MW及以上级大型电机用冷轧无取向电工钢带

Cold-rolled non-oriented electrical steel strip for large motors of 700MW and above