H57 高温合金 标准查询与下载

JIS G 4107:1994 高温设备用合金钢螺栓材料

Alloy steel bolting materials for high temperature service

YB/T 5249-1993 冷镦用高温合金冷拉丝

High temperature alloy cold drawing for cold heading

YB/T 5248-1993 铸造高温合金母合金

Cast Superalloy Master Alloy

YB/T 5247-1993 焊接用高温合金冷拉丝

High temperature alloy cold drawing for welding

EN 10028-2:1992 承压部件的扁钢制品.第2部分:规定高温性能的合金钢和非合金钢

Flat products made of steels for pressure purposes; part 2: non-alloy and alloy steels with specified elevated temperature properties

NAVY MIL-T-23132 A VALID NOTICE 1-1991 钨迟滞合成物

MIL-T-23132A(AS) (l), dated 3 January 1973, has been reviewed and determined to be valid for use in acquisition.

TUNGSTEN DELAY COMPOSITION

YB/T 4069-1991 GH 4133B合金盘形锻件

GH 4133B Alloy Disc Forgings

HB 5456-1990 高温合金钨极氩弧焊质量检验

本标准规定了高温合金钨极氩弧焊的质量检验。 　　本标准适用于厚度小于或等于4mm高温合金钨极氩弧焊的质量检验，也适用于高温合金与不锈钢等不同材料组合钨极氩弧焊的质量检验。

Tungsten argon arc welding quality inspection of superalloy

BS HR 506:1989 镍-铬-钴-钛-铝耐热合金线材:软化的(镍基、Cr19.5、Co1.8、Ti2.5、Al1.5)规范

Chemical composition, mechanical properties, inspection and test requirement for a softened wire for use as locking wire.

Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (Nickel base, Cr 19.5, Co 18, Ti 2.5, Al 1.5)

BS HR 209:1989 镍-铬-钴-钼-钛-铝耐热合金薄板材、带材和板材:软化的(镍基、Cr18、Co14、 Mo7、Ti2.2、Al2.1)规范

Chemical composition, mechanical properties and inspection and test requirements for general aerospace use.

Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy sheet, strip and plate: softened (nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)

ISO 4955:1983 耐热钢和耐热合金

Heat-resisting steels and alloys

NF A45-110:1983 钢铁.棒材和线材用不锈钢和耐热钢.轧制公差

Iron and steel. Stainless and heat resisting steel for bars and wires. Rolling tolerances.

HB 5220.3-1982 高温合金中硫量的测定

Determination of sulfur content in superalloys

HB 5220.15-1982 高温合金中铁量的测定

Determination of iron content in superalloys

HB 5220.23-1982 高温合金中氮量的测定

Determination of nitrogen content in superalloys

ISO 683-16:1976 热处理钢、合金钢和易切削钢.第16部分:沉淀硬化不锈钢

Heat-treated steels, alloy steels and free-cutting steels; Part XVI : Precipitation hardening stainless steels

BS HR 251:1974 耐热合金板材、薄板材和带材(Ni25.5、Cr14.7、Ti1.8、Mn1.5、Mo1.2、V0.3、Fe余量)规范

British Standard: Aerospace Series Specification for Heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder) 1. INSPECTION AND TESTING PROCEDURE 2. MANUFACTURE 3. CHEMICAL COMPOSITION 4. CONDITION 5. HEAT TREATMENT 6. MECHANICAL PROPERTIES

Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)

BS HR 51:1973 耐热合金坯锭、棒材、锻件和零件(Ni25.5、Cr14.7、Ti2、Mn1.5、Mo1.2、Si0.7、V0.3、Fe余量)规范

British Standard: Aerospace Series Specification for Heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 2, Mn 1.5, Mo 1.2, S i 0.7, V 0.3, Fe remainder) 1. Inspection and testing procedure 2. Manufacture 3. Chemical composition 4. Condition 5. Heat treatment 6. Mechanical properties

Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 2, Mn 1.5, Mo 1.2, Si 0.7, V 0.3, Fe remainder)

BS HR 52:1973 耐热合金坯锭、棒材、锻件和零件(Ni25.5、Cr14.7、Ti1.8、Mn1.5、Mo1.2、V0.3、Fe余量)规范

British Standard : Aerospace Series Specification for Heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder) 1. Inspection and testing procedure 2. Manufacture 3. Chemical composition 4. Condition 5. Heat treatment 6. Mechanical properties

Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)

BS HR 207:1973 镍-铁-铬-钼-铝-钛耐热合金板材、薄板材和带材(Ni/Co43.5、Cr16.5、Mo3.3、Al1.2、Ti1.2、Fe余量)规范

British Standard : Aerospace Series Specification for Nickel-iron-chromium-molybdenum-aluminium- titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2,Ti 1.2, Fe remainder) 1. Inspection and testing procedure 2. Manufacture 3. Chemical composition 4. Condition 5. Heat treatment 6. Mechanical properties

Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)