H70 粉末冶金综合 标准查询与下载

YS/T 914-2013 动力锂电池用铝壳

本标准规定了动力锂电池用铝壳的要求、试验方法、检验规则及标志、包装、运输、贮存、质量证明书和合同(或订货单)内容。本标准适用于各种动力锂离子电池用铝壳。

Aluminum case for power lithium battery

NF A95-431:2013 硬金属. 矫顽性(磁化)测定

Hardmetals - Determination of (the magnetization) coercivity

EN ISO 22068:2013 烧结金属粉末注射成型材料.规格

Sintered-metal injection-moulded materials - Specifications

BS EN ISO 3326:2013 硬金属. 矫顽性(磁化)测定

Hardmetals. Determination of (the magnetization) coercivity

NF A95-171:2013 金属粉末.除硬质合金外的金属粉末.与压实和烧结有关的尺寸变化的测定

Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering

YS/T 877-2013 可充电电池用镀镍壳

本标准规定了可充电电池用镀镍壳(以下简称镀镍壳)的要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书和合同(或订货单)内容、本标准适用于各种镍-氢(镍-镉)、碱性锌-锰、锂离子电池的圆柱形后镀镍钢壳的生产、检验和验收、

Nickel-plated shell for rechargeable battery

YS/T 512-2013 镍包铬复合粉

本标准规定了镍包铬复合粉的要求、试验方法、检验规则及标志、包装、运输、贮存、质量证明书和合同(或订货单)内容、本标准适用于热喷涂用加压氢还原法生产的镍包铬复合粉、

Nickel-coated chromium composite powders

ASTM B243-13 粉末冶金的标准术语

0

Standard Terminology of Powder Metallurgy

ISO 7625:2012 不包括硬质金属的烧结金属材料.碳含量测定用化学分析样品的制备

This International Standard specifies methods for preparing a sample from one or more sintered parts to be analysed for free or total carbon content. Combined carbon is determined as the difference between total and free carbon. This standard covers the preparation of samples for the determination of carbon by a chemical method, i.e. combustion in oxygen and measurement of the carbon dioxide produced, in accordance with ISO 437. It does not cover the preparation of samples for carbon determination by physical methods, such as metallography or spectroscopy.

Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content

BS EN ISO 5755:2012 烧结金属材料. 规范

Sintered metal materials. Specifications

KS D 0410-2012 高温粉末混合加热压制时流量测定方法

이 표준은 온간 성형에 사용되는 금속분의 유동도를 시험하는 방법에 대하여 규정하는 것으로서

Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting

KS D 0411-2012 高温粉末混合加热压制时表观密度的测定方法

이 표준은 특정한 장치를 사용하여 온간 성형에 사용되는 금속분말(이하 시료라 한다.)의 겉

Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting

ASTM B243-12 粉末冶金的标准术语

0

Standard Terminology of Powder Metallurgy

ASTM B243-11 粉末冶金学的标准术语

Standard Terminology of Powder Metallurgy

ASTM B657-11 烧结碳化物中微观结构的金相鉴定指南

The microstructure of a cemented carbide affects the materialrsquo;mechanical and physical properties. This guide is not intended to be used as a specification for carbide grades. Producers and users may use the microstructural information as a guide in developing their own specifications. 1.1 This test method covers apparatus and procedures for the metallographic determination of microstructures in cemented tungsten carbides. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Precautions applying to use of hazardous laboratory chemicals should be observed for chemicals specified in Table 1.

Guide for Metallographic Identification of Microstructure in Cemented Carbides

KS D ISO 7625:2010 不包括硬质合金的烧结金属材料.测定碳含量用化学分析的样品制备

이 표준은 1회 이상 소결한 재료에서 유리 탄소 또는 총 탄소 함량 분석을 위한 시료 채취

Sintered metal materials, excluding hardmetals-Preparation of samples for chemical analysis for determination of carbon content

KS D 0080-2010 泡沫金属.术语

이 표준은 발포 및 다공질 금속과 그 응용에 관한 주된 용어(이하, 용어라 한다.)에 대하

Glossary of terms used in metal foams

KS D ISO 4490:2010 金属粉末.校准漏斗(霍尔流量计)测定流动时间

이 표준은 보정된 깔때기(Hall 유동계)를 이용하여 초경 분말을 포함한 금속 분말의 유동

Metallic powders-Determination of flow rate by means of a calibrated funnel(Hall flowmeter)

ISO 26482:2010 硬质合金.铅和镉含量的测定

This International Standard specifies a flame atomic absorption spectrometric and inductively coupled plasma spectrometric method for the determination of the lead and cadmium contents in hardmetals. The method is applicable to products having lead and cadmium contents between 0,000 1 % (mass fraction) and 0,1 % (mass fraction).

Hardmetals - Determination of lead and cadmium content

ASTM B243-10 粉末冶金的标准术语

1.1 This terminology standard includes definitions that are helpful in the interpretation and application of powder metallurgy terms.

Standard Terminology of Powder Metallurgy