H72 粉末冶金材料与制品 标准查询与下载

YS/T 1137-2016 硬质合金板材

Carbide plate

YS/T 1134-2016 铁铝金属间化合物烧结多孔材料过滤元件

Iron-aluminum intermetallic compound sintered porous material filter element

YS/T 1139-2016 增材制造TC4钛合金蜂窝结构零件

Additive manufacturing of TC4 titanium alloy honeycomb structure parts

YS/T 1138-2016 硬质合金六方拼模

Carbide hexagonal molding

BS ISO 3365:2016 去毛边无固定孔的可转位硬质合金(碳化)刀片.尺寸

Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole. Dimensions

ISO 3365:2016 去毛边无固定孔的可转位硬质合金(碳化)刀片.尺寸

Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole - Dimensions

DIN ISO 23519:2015 烧结金属材料,不包括硬性金属.表面粗糙度的测量(ISO 23519-2010)

Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010)

JB/T 12256-2015 爆炸性气体环境用烧结不锈钢金属隔爆元件技术条件

本标准规定了爆炸性气体环境用烧结不锈钢金属隔爆元件的术语和定义、牌号、标记方法、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于由不锈钢金属粉末及金属丝网制造的爆炸性气体环境用烧结金属多孔隔爆元件。

Specification for sintered stainless steel metal elements of isolating explosion gas

JB/T 12255-2015 制冷压缩机烧结阀板、连杆和活塞技术条件

本标准规定了制冷压缩机烧结铁基粉末冶金阀板、连杆、活塞的产品分类、技术要求、试验方法、检验规则、包装、标志、运输和贮存。 本标准适用于制冷压缩机烧结铁基粉末冶金阀板、连杆、活塞(以下简称制冷压缩机零件)。

Specification for sintered valve plate, connecting rod and piston of refrigeration compressor

JB/T 9137-2015 烧结金属摩擦材料 金相检验法

本标准规定了采用金相法检验JB/T 3063中所列常用牌号的烧结金属摩擦材料(参见附录A)基体的组织、孔隙度、石墨和其他元素的分布。 本标准适用于规定中所描述的烧结金属摩擦材料的金相检验、分析和鉴别。附录B中的金相图片，可作为规定中所述10种牌号材料的金相评定参考，对于其他烧结金属摩擦材料也可参照执行。

Sintered metal friction materials.Metallographic method

JIS Z 2550 ERRATUM 1:2015 勘误

ERRATUM

BS ISO 14317:2015 非硬质金属的烧结金属材料.耐压屈服强度的测定

Sintered metal materials excluding hardmetals. Determination of compressive yield strength

YS/T 1063-2015 钼靶材

本标准规定了溅射镀膜用钼靶材的要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书和合同(或订货单)内容。 本标准适用于采用粉末冶金烧结方法和烧结后再压力加工方法制造的钼靶材，该靶材主要适用于光伏太阳能面板、平面显示器和触摸屏面板制造等行业。

Molybdenum target

ASTM A811-15 采用粉末冶金技术制造的软磁铁零件的标准规格

1.1 This specification covers parts produced from iron powder metallurgy materials. 1.2 This specification deals with powder metallurgy parts in the sintered or annealed condition. Should the sintered parts be subjected to any secondary operation that causes mechanical strain, such as machining or sizing, they should be resintered or annealed. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to customary (cgs-emu and inch-pound) units, which are provided for information only, and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques

ASTM B834-15 压力强化粉末冶金铁镍铬钼 (UNS N08367), 镍铬钼钶 (Nb) (UNS N06625), 镍铬铁合金 (UNS N06600和N06690)以及镍铬铁库仑的标准规格

1.1 This specification covers pressure consolidated powder metallurgy iron-nickel-chromium-molybdenum (UNS N08367) and nickel-chromium-molybdenumcolumbium (Nb) (UNS N06625), nickel-chromium-iron alloys (UNS N06600 and N06690), and nickel-chromium-iron-columbium (Nb)-molybdenum (UNS N07718) alloy pipe flanges, fittings, valves, and parts intended for general corrosion or heat-resisting service. 1.1.1 UNS N06625 products are furnished in two grades of different heat-treated conditions: 1.1.1.1 Grade 1 (annealed)—Material is normally employed in service temperatures up to 1100°F (593°C). 1.1.1.2 Grade 2 (solution annealed)—Material is normally employed in service temperatures above 1100°F (593°C) when resistance to creep and rupture is required. 1.2 UNS N08367 products are furnished in the solution annealed condition. 1.3 UNS N06600 products are furnished in the annealed condition. 1.4 UNS N06690 products are furnished in the annealed condition. 1.5 UNS N07718 products are furnished in the solution annealed + precipitation hardened condition. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following safety hazards caveat pertains only to test methods portions, Sections 7.3 and 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and to determine the applicability of regulatory limitations prior to use.

Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columb

KS B ISO 12085:2014 几何制品规范(GPS).表面特征:剖面法.主要参数

Geometrical Product Specifications(GPS) — Surface texture: Profile method — Motif parameters

DB36/T 816-2014 镍氢电池负极材料用AB3型贮氢合金粉

AB3 type hydrogen storage alloy powder for nickel metal hydride battery anode material

DB36/T 817-2014 粘结钕铁硼磁粉

Bonded NdFeB Magnetic Powder

YS/T 1007-2014 过滤用烧结不锈钢复合丝网

本标准规定了过滤用烧结不锈钢复合丝网的要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书和合同(或订货单)内容。本标准适用于通过轧制和烧结生产的用于过滤与分离的烧结不锈钢复合丝网。

Sintered stainless steel mesh filter materials

JB/T 12080-2014 粉末冶金机械式压力机 技术条件

本标准规定了粉末冶金机械式压力机的型号和基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于粉末冶金压制成形用机械式压力机(以下简称压力机)。

Mechanical compacting press for powder metallurgy.Technical spcifications