H94 轧制设备 标准查询与下载
共找到 203 条与 轧制设备 相关的标准，共 14 页
Power Rating of Single and Double Helical Gearing for Rolling Mill Service- Metric Edition
- ICS
- 25.080.20
- CCS
- H94
- 发布
- 2013-01-01
- 实施
1.1 This practice establishes the controls required for extrusion press solution heat treatment of the 6xxx and 7xxx series aluminum alloys in Table 1 when ASTM material specifications allow use of this process in lieu of furnace solution heat treatment. For the alloys listed in Table 1, this practice is an alternate process to solution heat treatment in a furnace, such as specified in Practice B918/B918M for the attainment of T3, T4, T6, T7, T8 and T9-type tempers (see ANSI H35.1/H35.1M).TABLE 1 Extrusion Billet or Log Temperature High LimitA Alloy Billet or Log Temperature Upper °F [Upper °C] 6005A, 6105 1050 565 6061, 6262, 6041, 6064 1050 565 6060, 6063, 6101, 6463, 6360, 6560 1060 570 6351, 6082, 1050 565 6066, 6070 1020 550 7004, 7005 1000 540
Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
- ICS
- 77.120.10 (Aluminium and aluminium alloys)
- CCS
- H94
- 发布
- 2013
- 实施
本标准规定了型材轧钢用导卫装置的术语和定义、分类、型号、要求、试验方法、检验规则、包装、标志、贮存和运输。本标准适用于型材(指角钢、槽钢、扁钢、方钢、工字钢、H型钢等)轧钢所使用的导卫装置。
Mill guides for rolling section steel
- ICS
- 77.180
- CCS
- H94
- 发布
- 2012-05-24
- 实施
- 2012-11-01
Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills; German version EN 15949:2012
- ICS
- 25.120.20;77.180
- CCS
- H94
- 发布
- 2012-05
- 实施
Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills
- ICS
- 25.120.20;77.180
- CCS
- H94
- 发布
- 2012-03-31
- 实施
- 2012-03-31
本标准规定了铝型材热挤压模具的使用、维护与管理。 本标准适用于铝及铝合金型材热挤压所使用的平面模具和平面平面分流组合模具（以下简称模具）。
Usage,maintaining and management for planar die and combined die used for aluminium and aluminium alloy profiles
- ICS
- 77.180
- CCS
- H94
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了冷弯型钢建筑用压型钢板机组的型号和规格、技术要求、检验方法、检验规则、标志、包 装、运输、贮存和使用说明书。 本标准适用于采用辊轧成型工艺生产建筑用压型钢板的机组，也适用于其他应用行业。以下简称机组。
Technical specifcation of roll forming mills for profiled steel sheet
- ICS
- 77.180
- CCS
- H94
- 发布
- 2011-12-20
- 实施
- 2012-07-01
SN/T 2876的本部分规定了进出口冶金工业成套设备之金属压延设备(以下简称金属压延设备)的检验技术要求。本部分适用于3.1所定义、附录A所列举的金属压延设备的检验,上述范围之外的冶金工业设备可参照使用。
Technical requirements for inspection of complete sets of equipment for import and export metallurgical industry Part 1: Metal rolling equipment
- ICS
- CCS
- H94
- 发布
- 2011-05-31
- 实施
- 2011-12-01
This document applies to splitting, skiving,edge trimming, strip cutting, cementing and cement drying machines used in the manufacture of footwear, leather and imitation leather goods and other related components.
Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment; German version EN 13675:2004+A1:2010
- ICS
- 77.180
- CCS
- H94
- 发布
- 2010-10
- 实施
- 2010-10-01
本标准规定了热钢坯剪断机的基本参数。 本标准适用于热状态下,横向剪切方坯、板坯和异型坯的剪断机(在剪切过程中钢坯没有纵向移动)。
Hot shears-Basic parameters
- ICS
- 25.120.20
- CCS
- H94
- 发布
- 2010-04-22
- 实施
- 2010-10-01
本标准规定了YLB系列液压冷拔机(以下简称冷拔机)的分类与命名,技术要求,试验方法,检验规则,标志、包装、运输与贮存等。 本标准适用于拔制黑色、有色金属管的冷拔机。
YLB Series hydraulic drawbench
- ICS
- 25.120.20
- CCS
- H94
- 发布
- 2010-04-22
- 实施
- 2010-10-01
本标准规定了两辊斜轧轧管机(以下简称轧管机)的术语和定义,型式与基本参数,技术要求,试验方法与检验规则,标志、包装、运输和贮存。 本标准适用于两辊斜轧轧管机的设计和制造。
Two rolls type cross rolling tube mill
- ICS
- 77.180
- CCS
- H94
- 发布
- 2010-04-22
- 实施
- 2010-10-01
本标准规定了斜辊式管材矫正机的技术条件,试验方法和检验规则及标志、包装、运输、贮存。 本标准适用于JB/T 1109规定的斜辊式管材矫正机。
Technical requirements for tube straightener with diagonal roll
- ICS
- 25.120.10
- CCS
- H94
- 发布
- 2010-04-22
- 实施
- 2010-10-01
本标准规定了型钢辊式矫直机的基本参数。 本标准适用于在冷态下矫直工字钢、角钢、钢轨、方钢、圆钢和异型钢等的型钢辊式矫直机。 本标准不适用于型钢斜辊式矫直机。
Section straightener-Basic parameters
- ICS
- 25.120
- CCS
- H94
- 发布
- 2010-04-22
- 实施
- 2010-10-01
本标准规定了热锯机的基本参数。 本标准适用于热状态下锯切矩形钢坯及成型断面钢材的热锯机。
Hot saw-Basic parameters
- ICS
- 25.120.20
- CCS
- H94
- 发布
- 2010-04-22
- 实施
- 2010-10-01
本标准规定了辊式板材矫正机基本参数。 本标准主要适用于冷矫金属板材矫正机。
Plate leveller of roller type-Basic parameter
- ICS
- 77.180
- CCS
- H94
- 发布
- 2010-04-22
- 实施
- 2010-10-01
本标准规定了管材矫正机(以下简称矫正机)的型式与基本参数。 本标准适用于矫正圆截面黑色及有色金属的矫正机。
Tube straightener-Type and basic parameter
- ICS
- 25.120.10
- CCS
- H94
- 发布
- 2010-04-22
- 实施
- 2010-10-01
This European Standard defines the general safety requirements for hot rolling mills for flat products as defined in 3.1. This European Standard deals with significant hazards, hazardous situations and events relevant to hot rolling mills for flat products. It deals not only with circumstances where the machinery is used as intended, but also includes other conditions foreseen by the manufacturer, such as foreseeable faults, malfunctions or misuse (see Clauses 4 and 5). This European standard applies to: Machinery and equipment used for the manufacturing of metal hot rolled flat products from the material supply from (1), via the mill stands (2), to the exit (5) (see Figure 1). ! The following equipment is outside the scope of this standard: furnaces in accordance with EN 746-1, EN 746-2 and EN 746-3; continuous casting machines according to EN 14753; hook conveyors according to EN 619; roll shop equipment; storage equipment (e. g., high-bay warehouses); cranes, fork lifts, trucks and railway trucks and other vehicles. This European standard is not applicable to hot rolling mills for flat products, manufactured before the date of publication of this standard by CEN.
Safety of Machinery - Safety requirements for hot flat rolling mills; English version of DIN EN 15093:2009-07
- ICS
- 77.180
- CCS
- H94
- 发布
- 2009-06
- 实施
- 2009-06-01
