J04 基础标准与通用方法 标准查询与下载
共找到 3915 条与 基础标准与通用方法 相关的标准，共 261 页
GB/T 15054的本部分规定了小螺纹的公差、极限尺寸、标记和检验。 本部分适用于公称直径范围为0.3 mm~1.4 mm的一般用途小螺纹。
Miniature screw threads.Part 2:Tolerances and limits of size
- ICS
- 21.040.30
- CCS
- J04
- 发布
- 2018-05-14
- 实施
- 2018-10-01
GB/T 11349的本部分定义了基本术语，并规定了测量机械导纳所使用的阻抗头、力传感器和运动响应传感器的适配性所需进行的校准测试、环境试验和物理测量方法。本部分主要为选择、校准和评定适用于机械导纳测量的传感器和测量仪器提供指导。GB/T 11349的后续部分对各种环境条件下的导纳测量方法做出了规定。 本部分仅给出了测量各种类型驱动点导纳和传递导纳、加速度导纳和位移导纳的基本信息，不涉及约束阻抗的测量。
Mechanical vibration and shock.Experimental determination of mechanical mobility.Part 1:Basic terms and definitions, and transducer specifications
- ICS
- 17.160
- CCS
- J04
- 发布
- 2018-05-14
- 实施
- 2018-12-01
本标准规定了用工业计算机层析成像(CT)检测电子束焊接接头的术语和定义、人员、环境条件、检测系统、对比试样、检测准备、检测程序、结果说明、检测报告等要求。 本标准适用于电子束焊接接头内部缺欠的定性、定量及定位检测。
Non-destructive testing of welds.Test method on electron-beam welded joints by industrial computed tomography (CT)
- ICS
- 19.100
- CCS
- J04
- 发布
- 2018-05-14
- 实施
- 2018-12-01
Mechanical vibration and shock—Signal processing—Part 2: Time domain windows for Fourier Transform analysis
- ICS
- 17.160
- CCS
- J04
- 发布
- 2018-03-15
- 实施
- 2018-10-01 00:00:00.0
General purpose metric screw threads—Tolerances
- ICS
- 21.040.10
- CCS
- J04
- 发布
- 2018-03-15
- 实施
- 2018-10-01 00:00:00.0
Mechanical vibration and shock—Signal processing—Part4：Shock-response spectrum analysis
- ICS
- 17.160
- CCS
- J04
- 发布
- 2018-03-15
- 实施
- 2018-10-01 00:00:00.0
Condition monitoring and diagnostics of machines—Data processing, communication and presentation—Part 3:Communication
- ICS
- 17.160
- CCS
- J04
- 发布
- 2018-03-15
- 实施
- 2018-10-01 00:00:00.0
Non-destructive testing—Test method for measuring industrial computed tomography (CT) density
- ICS
- 19.100
- CCS
- J04
- 发布
- 2018-02-06
- 实施
- 2018-09-01 00:00:00.0
Remanufacturing—Technical specifications for surface repair of mechanical products
- ICS
- 25.220.01
- CCS
- J04
- 发布
- 2018-02-06
- 实施
- 2018-09-01 00:00:00.0
Methods for the calibration of vibration and shock transducers—Part 16: Calibration by Earth's gravitation
- ICS
- 17.160
- CCS
- J04
- 发布
- 2018-02-06
- 实施
- 2018-02-06 00:00:00.0
Remanufacturing—Technical specifications for inspection of mechanical products
- ICS
- 25.010
- CCS
- J04
- 发布
- 2018-02-06
- 实施
- 2018-09-01 00:00:00.0
Product Geometric Specification (GPS) Surface Structure Area Method Part 6: Classification of Surface Structure Measurement Methods
- ICS
- 17.040.20
- CCS
- J04
- 发布
- 2017-2-28
- 实施
- 2017-8-1
Non-destructive testing—X-ray digital radiography—Practice
- ICS
- 19.100
- CCS
- J04
- 发布
- 2017-12-29
- 实施
- 2018-04-01 00:00:00.0
Additive manufacturing—Terminology
- ICS
- 01.040.25
- CCS
- J04
- 发布
- 2017-12-29
- 实施
- 2018-10-01 00:00:00.0
Non-destructive testing—Spatial resolution phantom for industrial computed tomography (CT) testing
- ICS
- 19.100
- CCS
- J04
- 发布
- 2017-12-29
- 实施
- 2018-04-01 00:00:00.0
Non-destructive testing—Test method of ammunition density by industrial computed tomography（CT）
- ICS
- 19.100
- CCS
- J04
- 发布
- 2017-12-29
- 实施
- 2018-04-01 00:00:00.0
Non-destructive testing—Density resolution phantom for industrial computed tomography (CT) testing
- ICS
- 19.100
- CCS
- J04
- 发布
- 2017-12-29
- 实施
- 2018-04-01 00:00:00.0
Non-destructive testing—Practice for electromagnetic (eddy-current) sorting of ferrous metals
- ICS
- 19.100
- CCS
- J04
- 发布
- 2017-12-29
- 实施
- 2018-04-01 00:00:00.0
Non-destructive testing—Practice for electromagnetic (eddy-current) sorting of nonferrous metals
- ICS
- 19.100
- CCS
- J04
- 发布
- 2017-12-29
- 实施
- 2018-04-01 00:00:00.0
Non-destructive testing—X-ray digital radiography—Guide
- ICS
- 19.100
- CCS
- J04
- 发布
- 2017-12-29
- 实施
- 2018-04-01 00:00:00.0
