共找到 306 条与 结构要素 相关的标准,共 21 页
Lays down the form and dimensions of undercuts for bolts, screws and similar externally threaded products, recommended for use in those cases where it is needed for components such as plugs.
Fasteners; Thread undercuts for external metric ISO threads
This non4overnment docwnent rn adopted on 30 January 1984 and ia approved for use by DoDe The indicated indwtry group has furnished the clearance required %y existing re@ations, Copies of the domment are stocked by the DoD Single Stock Point, Naval. ptrhl icatiorm and Forms Canter, PhSl.adelphia, PA 191 20, for issue to DoD activities only. Contractom and industry groups mat obtain copies directly from National 8tc?ndards AssociRtion, Ince y 5161 River Road, Rethesda, MD m16.
Bushing-Plain, Press Fit, Copper& Bronze Rev. 8
This Standard provides essentials specifications and dimensions for the gages used on Unified inch screw threads (UN and UNR thread form)and covers the specifications and dimensions for the thread gages and measuring equipment listed in Tables 1 and 2. The basic purpose and use of each gage are also described.
Gages and Gaging for Unified Screw Threads
Covers dimensions and gaging of pipe threads for general purpose applications.
Pipe Threads, General Purpose (Inch)
This nongovernment docurruint was adopted on 22 May 1986 and is approved for use by DoD. The indicated industry group has furnished the clearance required by existing regulations. by DOD Single SWk Point, Naval Publications and Forms Center, Philadelphia, PA 19120, for issue to DoD a c t i v i t i e s only. Contractors. and industry groups must obtain copies directly from National Standards Association, Inc., 5161 River Fbad, Bethesda, MD 20816.
Male Threaded Fasteners, Metric Design Parameters for
Insert Arrangement, Electrical Connector, Shell Size 12 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]
Insert Arrangement, Electrical Connector, Shell Size 12 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1669 A, DLA MIL-STD-1669 A, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]
Insert Arrangements Electrical Connector, Shell Size 16 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 VALID NOTICE 1
Insert Arrangements Electrical Connector, Shell Size 16 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1554 A, DLA MIL-STD-1554 A, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 NOT
NATIONAL AEROSPACE STANDARDS COMMITTEE
Insert Arrangements Electrical Connector, Shell Size 22 (Rev. 1) [Use: DLA MIL-STD-1554 A, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 VALID NOTICE 1, DLA MIL-STD-1554 NOTICE 3, DLA MIL-STD-1554 NOTICE 2, DLA MIL-STD-15
Insert Arrangement, Electrical Connector, Shell Size 24 (Rev. 1)
Insert Arrangement, Electrical Connector, Shell Size 24 (Rev. 1)
Plug, Grommet Sealing, Electrical Connector Superseded - December 1981 (Rev. 1) [Use: DLA MS3187 REV F, DLA MS3187 REV F, DLA MS3187 REV E NOTICE 1, DLA MS3187 REV E NOTICE 1, DLA MS3187 REV E, DLA MS3187 REV E, DLA MS3187 REV D, DLA MS3187 REV D, DLA
Plug, Grommet Sealing, Electrical Connector Superseded - December 1981 (Rev. 1) [Use: DLA MS3187 REV F, DLA MS3187 REV F, DLA MS3187 REV E NOTICE 1, DLA MS3187 REV E NOTICE 1, DLA MS3187 REV E, DLA MS3187 REV E, DLA MS3187 REV D, DLA MS3187 REV D, DLA
Insert Arrangement, Electrical Connector, Shell Size 8 (Rev. 2)
Insert Arrangement, Electrical Connector, Shell Size 8 (Rev. 2)
Insert Arrangements Electrical Connector, Shell Size 10 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 VALID NOTICE 1
Insert Arrangements Electrical Connector, Shell Size 10 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1554 A, DLA MIL-STD-1554 A, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 NOT
Junction Box Assembly Cast Al Aly, Weatherproof (Rev. 2)
Junction Box Assembly Cast Al Aly, Weatherproof (Rev. 2)
Gasket - Junction Box (Rev. 2)
Gasket - Junction Box (Rev. 2)
CONTACT IDENTIFICATION LETTERS ON REAR GROMMET FACE OF SOCKET AND P I N INSERT SHALL BE WITHIN 45' EITHER SIDE OF VERTLCAL CENTERLINE ABOVE THE CONTACT CAVITY. IDENTIFICkTlON OF CONTACT CAVITIES A AND W IS OPTIONAL FOR THE -39 INSERT ARRANGEMENT
Insert Arrangement, Electrical Connector, Shell Size 20 (Rev. 3)
Insert Arrangement, Electrical Connector, Shell Size 18 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]
Insert Arrangement, Electrical Connector, Shell Size 18 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1669 A, DLA MIL-STD-1669 A, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]
AL. ALLOY DIE CASTING ALCOA*13 ( A M Y 57-93.8 GR.2) MAY BE PURCHASED FROM WARVIìì A\RCRAFT DIE CASTING CORP. OR EQUM
Insert Arrangement, Electrical Connector, Shell Size 16 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1669 A, DLA MIL-STD-1669 A, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号