J05 结构要素 标准查询与下载

AIA/NAS NA 0146-1994 联邦科学委员会 5340,修正 1,模型合金钢锁键螺纹嵌入物

Bakelite Corporation No. BM-926 or equivalent, Color to be natural browm.

Insert, Screw Thread Key Locked, Alloy Steel, Miniature, Metric FSC 5340, Revision 1

ISO 4156:1981/Amd 1:1992 圆柱直齿渐开线花键 米制模数、齿侧室心 概论、尺寸和检验 修改1 第3节:检验

Straight cylindrical involute splines; metric module, side fit; generalities, dimensions and inspection; amendment 1; section 3: inspection

AIA/NAS NAS 1723-1992 (Rev. 1)包箔折边型电子金属小孔

Eyelet, Metallic, Electrical, Rolled Flanged Type (Rev. 1)

Eyelet, Metallic, Electrical, Rolled Flanged Type (Rev. 1)

AIA/NAS NAS 73-1992 (Rev. 7)镀铬钢向上夹套管

THIS STANDARD IS ESTABLISHED AS A MEANS TO EFFECT THE STANOARDIZATION OF THE IOENTIFICATION OF WIRE TERMINATIONS AS USED ON ELECTRICAL ANO ELECTRONIC COMPONENTS.

Bushing-Clamp-Up, Steel, Cadmium Plated (Rev. 7)

AIA/NAS NAS 1788-1992 Rev. 2包箔折边型电子金属小孔

Eyelet, Metallic, Electrical, Rolled Flanged Type Rev. 2

Eyelet, Metallic, Electrical, Rolled Flanged Type Rev. 2

ANSI/ASME B1.3M-1992 英制和米制(UN, UNR,UNJ, M, and MJ)螺纹的尺寸验收用测量系统

Presents screw thread gaging systems suitable for determining the acceptability of UN, UNR, UNJ, M, and MJ screw threads on externally and internally threaded products. It establishes the criteria for screw thread acceptance when a gaging system is used.

Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

ANSI/ASME B1.20.5-1991 干密封管螺纹的测量(英制)

Provides information regarding practical dry seal thread inspection methods and commonly used gages for production evaluation purposes. All dimensions are in inches unless otherwisespecified.

Gaging for Dryseal Pipe Threads (Inch)

ANSI/ASME B1.20.7-1991 英制软管连接螺纹

Provides standards for application to the threaded parts of hose couplings, valves, nozzles, and all other fittings used in direct connection with hose intended for domestic, industrial, andgeneral service in nominal sizes of 1/2, 3/8, 3/4, 1, 1 1/4,1 1/2, 2, 2 1/2, 3, 3 1/2, and 4 in.

Hose Coupling Screw Threads – Inch

DIN 332-4:1990 轨道车辆桥的中心孔

Centre holes for rail vehicles axles

AIA/NAS NA 0242-1990 公制防锈钢自锁透孔螺纹铸造夹心板嵌入物

This standard provides a method for the packaging of sheet material with critical surfaces and/or edges (e.g., metar-clad, laminated plastic, honeycomb, etc.) in transparent plastic bags.

Insert, Sandwich Panel, Molded in, Thru Threaded, Self-Locking, Cres, Metric

AIA/NAS NA 0243-1990 公制防锈钢自锁透孔螺纹铸造夹心板嵌入物

NA0243, llInsert,S andwich Panel, Molded In, Blind Threaded, Self-Locking, CRES, Metric", was adopted on 21-AUG-95 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Industrial Supply Center, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the Aerospace Industries Associated of America, Inc., 1250 Eye Street, N.W., Suite 100, Washington, DC 20005-3922.

Insert, Sandwich Panel, Molded in, Blind Threaded, Self-Locking, Cres, Metric

AIA/NAS NA 0241-1990 公制轻量型自锁遮蔽螺纹铸造夹心板嵌入物

NA0241, "Insert, Sandwich Panel, Molded In, Blind Threaded, Self-Locking, Cres, Lightweight, Metric", was adopted on 21-AUG-95 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Industrial Supply Center, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the Aerospace Industries Associated of America, Inc., 1250 Eye Street, N.W., Suite 100, Washington, DC 20005-3922

Insert, Sandwich Panel, Molded in, Blind Threaded, Self-Locking, Cres, Lightweight, Metric

AIA/NAS NA 0244-1990 公制移动铝/钢自锁遮蔽螺纹铸造夹心板嵌入物

ALL PARTS MANUFACTURED AE'TER (REVISION 5 RELEASE) SHALL BE MARKED PER MIL-STD-130. UNMARKED PARTS MAY BE DELIVEREED UNTIL (REVISION 5 RELEASE f ONE YEAR.)

Insert, Sandwich Panel, Molded in, Blind Threaded, Self-Locking, Alum/Steel, Floating, Metric

AIA/NAS NA 0245-1990 公制移动防锈钢/防锈钢自锁遮蔽螺纹铸造夹心板嵌入物

Entrance chamfer shall not fall within the maximum grip.

Insert, Sandwich Panel, Molded in, Blind Threaded, Self-Locking, Cres/Cres, Floating, Metric

DIN 650:1989 机床.T型槽.尺寸

This standard specifies the dimensions of T-slots for machine tool tables.

Machine tools; T-slots; dimensions

HB 4267-1989 钢丝螺套用校通－通螺纹塞规ＴＴ ＳＴ６×１～ＳＴ３３×２

Calibration-through thread plug gauge for steel wire screw sleeve TT ST6×1~ST33×2

HB 6222-1989 切制ＭＪ内螺纹工艺底孔基本尺寸偏差

本标准规定了ＭＪ内螺纹工艺底孔基本尺寸及偏差。 　　本标准适用于切制加工内螺纹的工艺底孔。当用螺纹铣刀加工内螺纹时，工艺底孔均采用第１系列。

Deviation from basic dimensions of technical bottom hole for cutting out ＭＪinternal thread

HB 4268-1989 钢丝螺套用校通－止通螺纹塞规ＴＺ ＳＴ６×１～ＳＴ３３×２

TZ ST6×1~ST33×2 for check-through-stop thread plug gauge for steel wire screw sleeve

AIA/NAS NA 0153-1989 (Rev. 1)公制1100兆帕A286防锈钢打眼螺栓

NOMINAL LENGTH E a u u BASIC THICKNESS OF PUTE FOR INSERT ASSEMBLY. 2. ASSEMBLED LENGTH OF INSERT TO BE AS SPECIFEO ON MS33537. *3. NUMBER OF FREE COILS TO BE COUNTED ANO ASSEMBLED LENGTH OF INSERT TO BE MEASUREO 9U FROM TANG. 4. MATERUL: STEEL, CORROSION RESISTANT. AMs 7245 (MATERIAL ANO MFG.). 5. SURFACE TEXTURE: ANSI 846.1-1952. 6. INSERT, WHEN ASSEMBLED IN TAPPE0 HOLE AS SPECIFIED IN MS33537. SHKL PRODUCE A FINISHED THD MEETING ALL REOUIREMENTS OF MIL-S-7742 AND SHALL ACCEPT D(TERNAL MIL-S-8879 THREADS.

Bolt, Eye, A286 CRES, 1100 MPa Metric (Rev. 1)

AIA/NAS NA 0152-1989 (Rev. 1)公制1100兆帕合金钢打眼螺栓

USE OF OR RELUNCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY AIA DOES NOT QUALIFY SUPPLIERS OR :ERTiFY CONFORMANCE OF ITEMS PROCURED UNDER NATIONAL AEROSPACE STANDARDS. UTABILITY OF ITEMS FOR

Bolt, Eye, Alloy Steel, 1100 MPa Metric (Rev. 1)