共找到 717 条与 滑动轴承 相关的标准,共 48 页
Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 1: Calculation of thrust pad bearings
This part of PNS ISO 4382 specifies requirements for wrought topper alloys for use in solid plain bearings, particularly for bushes.
Plain bearings - Copper alloys - Part 2: Wrought copper alloys for solid plain bearings
The aim of PNS ISO 12130 is to achieve designs of plain bearings that are reliable in operation by the application of a calculation method for oil-lubricated hydrodynamic plain bearings with complete separation of the thrust collar and plain bearing surfaces by a film of lubrican
Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings
This Standard specifies the derivation of mathematical functions to be applied when calculating tilting pad thrust bearings.
Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 2: Functions for calculation of tilting pad thrust bearings
Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 2: Functions for the calculation of thrust pad bearings
Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
Plain bearings - Wrapped bushes - Part 6: Checking the inside diameter
Plain bearings - Terms, definitions, classification and symbols - Part 5: Application of symbols
Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 3: Guide values for the calculation of thrust pad bearings
Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA
This document specifies the dimensions and designations of cylindrical and flanged wrapped bushes made of mono and multi-layer bearing material for plain bearing applications.
Plain bearings - Wrapped bushes - Part 1: Dimensions
This document specifies a non-destructive penetrant testing for determining bond defects and discontinuities in the sliding surface of the bearing. The penetration method is used to detect a) bond defects in the transitional area between the bearing backing/bearing material on the end faces and joint faces of multilayer plain bearings which cannot be detected by the ultrasonic testing method specified in ISO 4386-1, and b) discontinuities in the sliding surface of the bearing. The penetration method is applicable, in principle, to finished multilayer plain bearings. The bond test is usually carried out on cast multilayer plain bearings, with a backing consisting of steel, cast steel or cast bronze. It can also be used as a non-production method to aid detection of manufacturing process defects with other bearing material types. Bearing backings which cannot be tin-plated, or only with difficulty, such as perlitic cast iron, rust-resistant steel and cast aluminium, cannot be tested since no bond is possible between the bearing material and bearing backing.
Plain bearings - Metallic multilayer plain bearings - Part 3: Non-destructive penetrant testing
This document gives requirements and guidance to obtain the optimum bond between backing and bearing metal for thick-walled multilayer plain bearings. This optimum bond depends on the chemical composition, the state of stress, the structural arrangement and the machining of the bond surface of the backings. NOTE Control of the manufacturing process is an important requirement to achieve an optimum bond between backing material and bearing metal.
Plain bearings - Requirements and guidance on backings for thick-walled multilayer bearings
Plain Bearings -- Bushes for journal bearings
Plain bearings. Terms, definitions, classification and symbols. Design, bearing materials and their properties
Plain bearings. Terms, definitions, classification and symbols. Friction and wear
This document specifies the most commonly used terms relating to friction and wear of plain bearings with their definitions and classification. For some terms and word combinations, their short forms are given, which can be used where they are unambiguous. Self-explanatory terms are given without definitions.
Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear
This document specifies the most commonly used terms relating to lubrication of plain bearings with their definitions and classification. For some terms and word combinations, their short forms are given, which can be used where they are unambiguous. Self-explanatory terms are given without definitions.
Plain bearings - Terms, definitions, classification and symbols - Part 3: Lubrication
This document specifies the most commonly used terms relating to design, bearing materials and their properties of plain bearings with their definitions and classification. For some terms and word combinations, their short forms are given, which can be used where they are unambiguous. Self-explanatory terms are given without definitions.
Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties
Plain bearings. Quality assurance of sample types. Definitions, applications and testing
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号