J18 链传动、皮带传动与键联结 标准查询与下载
共找到 836 条与 链传动、皮带传动与键联结 相关的标准，共 56 页
JB/T 7700的本部分规定了金属板材旋压V带轮(以下简称带轮)的型式和槽型尺寸、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于汽车、工程机械、农用机械、家电和特种设备等传动用V带轮。
Metal spinning pulleys.Part 1: Sheet spinning V-grooved pulleys
- ICS
- 21.220.10
- CCS
- J18
- 发布
- 2016-01-15
- 实施
- 2016-06-01
JB/T 7700的本部分规定了金属板材旋压多楔带轮(以下简称带轮)的型式和槽型尺寸、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于汽车、工程机械、农用机械、家电、特种设备等传动用多楔带轮。
Metal spinning pulleys.Part 2: Sheet spinning V-ribbed belts pulleys
- ICS
- 21.220.10
- CCS
- J18
- 发布
- 2016-01-15
- 实施
- 2016-06-01
Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths
- ICS
- 21.220.30
- CCS
- J18
- 发布
- 2015-12-25
- 实施
- 2015-12-25
This Standard covers roller chains that are specifically designed to withstand occasional high shock loads, or high starting loads, that are encountered in certain construction equipment and other severe-duty applications. WARNING: Chains covered in this Standard shall not be used as the primary lifting member, or in the direct drive line of elevators, escalators, or similar devices for lifting human passengers unless applied in accordance with ASME A17.1. Chains covered in this Standard shall not be used as climbing chains.
High-Strength Chains for Power Transmission and Tension Linkages
- ICS
- CCS
- J18
- 发布
- 2015-12-14
- 实施
- 2015-12-10
Steel cord conveyor belts. Cord-to-coating bond test. Initial test and after thermal treatment
- ICS
- 53.040.20
- CCS
- J18
- 发布
- 2015-11-30
- 实施
- 2015-11-30
Steel cord conveyor belts. Longitudinal traction test. Measurement of tensile strength
- ICS
- 53.040.20
- CCS
- J18
- 发布
- 2015-11-30
- 实施
- 2015-11-30
Synchronous belt drives. Imperial pitch trapezoidal profile system. Belts and pulleys
- ICS
- 21.220.10
- CCS
- J18
- 发布
- 2015-10-31
- 实施
- 2015-10-31
本标准规定了泥浆状物质输送设备上使用的刮板链、附件和链轮的技术要求，包括结构型式、尺寸、长度测量和抗拉强度等。 本标准适用于泥浆状物质输送设备上使用的铸造和焊接结构刮板链、附件和链轮。
Drag chains, attachments and sprockets for sludge conveyors
- ICS
- 21.220.30
- CCS
- J18
- 发布
- 2015-10-10
- 实施
- 2016-03-01
本标准规定了橡胶附板链和链轮的结构型式、基本参数和尺寸、链条的抗拉强度和链长精度等。 本标准适用于输送表面不能损坏的物品的橡胶附板链和链轮。
Elastomer attachment plates chains and sprockets
- ICS
- 21.220.30
- CCS
- J18
- 发布
- 2015-10-10
- 实施
- 2016-03-01
Synchronous belt drives - Imperial pitch trapezoidal profile system - Belts and pulleys
- ICS
- 21.220.10
- CCS
- J18
- 发布
- 2015-10
- 实施
Leaf chains, clevises and sheaves. Dimensions, measuring forces, tensile strengths and dynamic strengths
- ICS
- 21.220.30
- CCS
- J18
- 发布
- 2015-09-30
- 实施
- 2015-09-30
Belt drives. Electrical conductivity of antistatic endless synchronous belts. Characteristics and test method
- ICS
- 21.220.10
- CCS
- J18
- 发布
- 2015-09-30
- 实施
- 2015-09-30
Fatigue test method for transmission precision roller chains and leaf chains
- ICS
- 21.220.30
- CCS
- J18
- 发布
- 2015-09-30
- 实施
- 2015-09-30
This International Standard specifies the maximum and minimum electrical resistance of antistatic endless and open ended synchronous belts. This International Standard provides guidelines to allow testing of synchronous belts to prove their static conductive (dissipative) properties as well as a corresponding production control test method. The application of this International Standard is limited to new belts intended to be used in an explosive atmosphere or in situations where there is a fire risk. The test is intended to ensure that the belt is sufficiently conductive to dissipate charges of electricity which may form on it in service. In the case of a production control test, the decision is left to national standards or agreement between interested parties as to whether the test shall be carried out on each belt in a batch or on only a percentage of belts in a batch. For each proof test, the belt manufacturer shall determine which type of electrode and conductive coating material shall be used.
Belt drives - Electrical conductivity of antistatic endless synchronous belts - Characteristics and test method
- ICS
- 21.220.10
- CCS
- J18
- 发布
- 2015-09
- 实施
This International Standard specifies an axial force fatigue test method for transmission roller chains and leaf chains. The tests being of the fluctuating tension type, carried out at room temperature in air, with the force applied along the longitudinal axis of the chain. It also specifies procedures for statistically analysing the test results and gives formats and elements for presenting the results of fatigue tests and analyses.
Fatigue test method for transmission precision roller chains and leaf chains
- ICS
- 21.220.30
- CCS
- J18
- 发布
- 2015-09
- 实施
This International Standard specifies the characteristics of chains used for general lifting purposes, together with the rim profiles of sheaves and the chain attachment ends of clevises. It gives dimensions, limits for interchangeability, length measurement, preloading, minimum tensile strengths and minimum dynamic strengths.
Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths
- ICS
- 21.220.30
- CCS
- J18
- 发布
- 2015-09
- 实施
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
- ICS
- 21.220.30
- CCS
- J18
- 发布
- 2015-08-31
- 实施
- 2015-08-31
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
- ICS
- 21.220.30
- CCS
- J18
- 发布
- 2015-08
- 实施
本标准规定了“O”型密封圈摩托车用传动链条的术语和定义、结构型式、链号、基本参数、尺寸、技术要求、试验方法和配套使用的链轮。本标准适用于摩托车后驱动结构使用的链条。
O-ring sealed motorcycle chains
- ICS
- 21.220.30
- CCS
- J18
- 发布
- 2015-07-14
- 实施
- 2016-01-01
