润滑与润滑装置标准-分析测试百科网

ASTM F1567-94(2001) 制造的或铸造的自动清洗燃料油和润滑油过滤器标准规范

1.1 This specification covers automatic or continuously self-cleaning automatic strainers, or both, for use in fuel and lubrication oil systems. The strainer is designed to operate under positive pressure (discharge side of the pump). Strainers manufactured to this specification are suitable for use in any marine environment. 1.2 It is not the intent of this document to redefine existing filtration standards. The intent is to provide sound guidelines for purchasers and designers of lube oil and fuel oil systems. Nominal micron requirements and filter efficiencies shall be as agreed upon by the purchaser and manufacturer and stated in the purchase order document.

Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers

ICS: 21.260 (Lubrication systems)
CCS: J21
发布: 1994
实施

ASTM F1567-94(2006) 制造的或铸造的自动清洗燃料油和润滑油过滤器标准规范

1.1 This specification covers automatic or continuously self-cleaning automatic strainers, or both, for use in fuel and lubrication oil systems. The strainer is designed to operate under positive pressure (discharge side of the pump). Strainers manufactured to this specification are suitable for use in any marine environment.1.2 It is not the intent of this document to redefine existing filtration standards. The intent is to provide sound guidelines for purchasers and designers of lube oil and fuel oil systems. Nominal micron requirements and filter efficiencies shall be as agreed upon by the purchaser and manufacturer and stated in the purchase order document.

Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers

ICS: 21.260 (Lubrication systems)
CCS: J21
发布: 1994
实施

JB/T 4121-1993 润滑元件及装置.型号编制方法

　　本标准规定了润滑元件及装置产品的型号编制方法。　　本标准适用于冶金、重型、矿山机械等行业的各类润滑元件及装置产品的型号编制。　　本标准不适用于对产品型号已有规定协议的引进技术及与国外合作制造的润滑产品。

Lubricating elements and devices Method for designing types

ICS: 21.260
CCS: J21
发布: 1993-09-03
实施: 1994-07-01

NBN-EN 24567-1992 船舶建造．游玩航行．水管（ISO 4567：1978）

Shipbuilding. Yachts. Waste water fittings (ISO 4567:1978)

ICS
CCS: J21
发布: 1992-12-18
实施

NBN-EN 24565-1993 游船．锚上的链子（ISO 4565：1986）

Small craft. Anchor chains (ISO 4565:1986)

ICS
CCS: J21
发布: 1992-12-18
实施

NBN-EN 24566-1992 船舶建造．游船内部的发动机．树梢螺旋桨架及螺旋桨毂（ISO 4566：1985）

Shipbuilding. Inboard-engined pleasure craft. Propeller shaft ends and bosses (ISO 4566:1985)

ICS
CCS: J21
发布: 1992-12-18
实施

BS 4231:1992 工业液体润滑剂粘度等级的分类

This International Standard establishes a system of viscosity classification for industrial liquid lubricants and related fluids. This includes mineral oils used as lubricants, hydraulic fluids, electrical oils and for other applications The usual method for kinematic-viscosity determination is that specified in ISO 3104, but this may give anomalous results when used with non-Newtonian fluids (i.e. those whose coefficient of viscosity varies significantly with rate of shear). For such fluids, it is therefore important to state the particular method by which viscosity has been de-termined. It is also recognized that there may be some pure chemicals and naturally occurring products, used as lubricants, which will not fall within this classifi-cation.

Classification for viscosity grades of industrial liquid lubricants

ICS: 75.100
CCS: J21
发布: 1992-12-15
实施: 1992-12-15

JIS B 9808:1991 润滑脂枪

こめ規格は，JIS B 1575によるニップルをとおしで機械の潤滑部分に,グリースを注人するのに用いるグリースガンについて規定する。

Grease guns

ICS: 21.260;75.100
CCS: J21
发布: 1991-03-01
实施

DIN 1282:1990 润滑脂枪.手动挤压式油枪

Grease gun operated by push of handcraft for lubrication of nipples cupped- and cone type, used by small works (f.e. grease set for mobile equipments).#,,#

Grease guns; push type-hand gun