J21 润滑与润滑装置 标准查询与下载

JB/T 4121-1993 润滑元件及装置.型号编制方法

　　本标准规定了润滑元件及装置产品的型号编制方法。 　　本标准适用于冶金、重型、矿山机械等行业的各类润滑元件及装置产品的型号编制。 　　本标准不适用于对产品型号已有规定协议的引进技术及与国外合作制造的润滑产品。

Lubricating elements and devices Method for designing types

NBN-EN 24566-1992 船舶建造．游船内部的发动机．树梢螺旋桨架及螺旋桨毂（ISO 4566：1985）

Shipbuilding. Inboard-engined pleasure craft. Propeller shaft ends and bosses (ISO 4566:1985)

NBN-EN 24565-1993 游船．锚上的链子（ISO 4565：1986）

Small craft. Anchor chains (ISO 4565:1986)

NBN-EN 24567-1992 船舶建造．游玩航行．水管（ISO 4567：1978）

Shipbuilding. Yachts. Waste water fittings (ISO 4567:1978)

BS 4231:1992 工业液体润滑剂粘度等级的分类

This International Standard establishes a system of viscosity classification for industrial liquid lubricants and related fluids. This includes mineral oils used as lubricants, hydraulic fluids, electrical oils and for other applications The usual method for kinematic-viscosity determination is that specified in ISO 3104, but this may give anomalous results when used with non-Newtonian fluids (i.e. those whose coefficient of viscosity varies significantly with rate of shear). For such fluids, it is therefore important to state the particular method by which viscosity has been de-termined. It is also recognized that there may be some pure chemicals and naturally occurring products, used as lubricants, which will not fall within this classifi-cation.

Classification for viscosity grades of industrial liquid lubricants

JIS B 9808:1991 润滑脂枪

こめ規格は，JIS B 1575によるニップルをとおしで機械の潤滑部分に,グリースを注人するのに用いるグリースガンについて規定する。

Grease guns

DIN 1282:1990 润滑脂枪.手动挤压式油枪

Grease gun operated by push of handcraft for lubrication of nipples cupped- and cone type, used by small works (f.e. grease set for mobile equipments).#,,#

Grease guns; push type-hand gun

DIN 1283:1990 滑油枪.手动杠杆式油枪和附件

Grease guns; lever type-hand guns and accessories

DIN 1284:1990 润滑脂枪.杠杆式滑油枪的润滑脂筒.主要尺寸

This standard valid for cartridges, which filled by grease inserted to lever type-hand gun in accordance of DIN 1283.#,,#

Grease guns; grease cartridges for lever type-hand gun; main dimensions

JB/T 7942.2-1995 手推式油枪

Lever type grease guns

JB/T 7941.1-1995 压配式圆形油标

Oil level indicators push-fit round type

JB/T 7941.2-1995 旋入式圆形油标

Screw in round oil pointers

JB/T 7941.3-1995 长形油标

Long-shaped oil pointers

JB/T 7941.4-1995 管状油标

Tubular oil pointers

JB/T 7941.5-1995 油标技术条件

Technical specification for oil pointers

JB/T 7942.1-1995 压杆式油枪

Lever type grease guns

JB/T 7942.3-1995 油枪技术条件

Grease guns technical specification

DIN 3404:1988-01 扁平注油嘴

Lubricating nipples; button head

DIN 3405:1986-05 杯形润滑油嘴

This standard covers lubricating nipples of funnel type by pivot of thread or to drive in. Furthermore the content describes the figure, the dimensions, the specification of materials and of protection of corrosion.; For lubricating the grease gun shall be equip (to fit out) of long-head tip (Spitzmundst乧k) (for example DIN 1283 form CS), the connection between nipple and coupling to ensure by press on the nipple.#,,#

Lubricating nipples cupped type

DIN 24271-3:1982 集中润滑系统.第3部分:技术数值及单位

Centralized lubrication systems, technical quantities and units

Centralized lubrication systems; Technical quantities and units