共找到 1108 条与 磨料与磨具 相关的标准,共 74 页
本文件规定了反应烧结碳化硅方梁的产品分类、技术要求、试验方法、检验规则、包装、标志、运输和储存。 本文件适用于使用温度不高于1350℃的反应烧结碳化硅方梁。
Special products of silicon carbide—Kiln furniture of reaction bonded silicon carbide—Part 1:Beams
本文件规定了金刚石或立方氮化硼砂轮、磨头、磨石的形状和尺寸。 本文件适用于金刚石或立方氮化硼砂轮、磨头和磨石。 本文件不适用于有单列产品标准规定的金刚石或立方氮化硼砂轮、磨头和磨石。
Superabrasive products—Grinding tools with diamond or cubic boron nitride—Shapes and dimensions
本文件规定了碳化硅磨料的牌号、技术要求、试验方法、检验规则和包装、标志、运输及贮存。 本文件适用于制造固结磨具、涂附磨具用途和自由研磨、抛光、切割用途的碳化硅磨料。
Conventional abrasive—Silicon carbide
本文件规定了烧结金刚石圆锯片的代号和标记、基体和锯齿基本尺寸、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于石材、混凝土、耐火材料、沥青、碳素、陶瓷、玻璃等材料切割加工用的烧结金刚石圆锯片(以下简称锯片)。
Superabrasive products—Diamond circular saw blade—Part 2:Sintered saw blades
本文件规定了金属结合剂、陶瓷结合剂和树脂结合剂金刚石或立方氮化硼砂轮和磨头的极限偏差和圆跳动公差。 本文件适用于金属结合剂、陶瓷结合剂和树脂结合剂金刚石或立方氮化硼砂轮和磨头。 本文件不适用于单列产品标准中对极限偏差和圆跳动公差另有规定的金刚石或立方氮化硼砂轮和磨头。
Superabrasive products—Grinding wheels and mounted points with diamond or cubic boron nitride—Limit deviations and run-out tolerances
本文件界定了磨料磨具领域的一般术语和各种磨料、磨具的名称,并表述了其定义(或说明)。 本文件适用于磨料、磨具、磨削加工和相关的行业。
Terminology for abrasives and abrasive products
本文件规定了砂页轮的常用尺寸和极限偏差、标记和标志。 本文件适用于用在固定磨削机上的装有卡盘或未装卡盘的砂页轮。
Coated abrasives—Flap wheels with incorporated flanges or separate flanges
本文件规定了焊接金刚石圆锯片的代号和标记、基体和锯齿基本尺寸、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于石材、混凝土、耐火材料、沥青、碳素、陶瓷、玻璃等材料切割加工用的焊接金刚石圆锯片(以下简称锯片)。
Superabrasive products—Diamond circular saw blade—Part 1:Welded saw blades
GB/T39140的本部分规定了金刚石圆锯片用夹紧卡盘的类型和尺寸、要求、标记和标志。 本部分适用于切割建筑和土木工程材料、安装在固定式切割机、移动式切割机和手持式切割机上的金刚石圆锯片用夹紧卡盘。
Clamping flanges for diamond circular saw blade—Part 2:Building construction and civil engineering
本标准规定了金刚石圆锯片基体安装和固定孔的类型和尺寸、标记。本标准适用于建筑施工和土木工程用金刚石圆锯片基体的安装和固定孔。
Blanks for diamond circular saw blade—Mounting and fixing bores—Building construction and civil engineering
GB/T39140的本部分规定了金刚石圆锯片用夹紧卡盘的类型和尺寸、材料、标记和标志。 本部分适用于天然和人造石材加工、安装在固定式切割机上的金刚石圆锯片用夹紧卡盘。
Clamping flanges for diamond circular saw blade—Part 1:Stone processing
本标准规定了白刚玉、铬刚玉磨料及结晶块中灼减 (或灼增 )、二氧化硅、三氧化二铁、氧化钾、氧化钠、三氧化二铬、氧化钙、氧化镁、三氧化二铝的测定方法。 本标准适用于白刚玉、铬刚玉磨料及结晶块化学成分的测定。 本标准不适用于因使用后而发生成分变化的产品。
Chemical analysis methods for white fused alumina and pink fused alumina
GB/T2481 的本部分规定了刚玉、碳化硅微粉F230~F2000、J240~J8000 的术语和定义、粒度组
Bonded abrasives—Determination and designation of grain size distribution—Part 2:Microgrits
Abrasive grains—Sampling and splitting
Bonded abrasive products—General requirements
本标准规定了喷砂硬度机检验磨具硬度的方法和洛氏硬度计检验磨具硬度的方法。 本标准适用于磨料粒度为F36~F1200 的陶瓷结合剂和树脂结合剂固结磨具。
Bonded abrasive products.Hardness grade measurement
Superabrasive—Cubic boron nitride
Abrasive grains—Test-sieving machines
Bonded abrasive products—Dimensions—Part 18: Grinding wheels for flat glass edge grinding machines
Superabrasive products—Grinding tools with diamond or cubic boron nitride—General survey and designation
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号