J45 组合卡具 标准查询与下载

ANSI/ASME B5.50-2009 工具自动转位装置主轴连接用7/24锥度工具

This Standard pertains to the standardization of a basic toolholder shank, retention knob, and socket assemblies for numerically controlled machining centers with automatic tool changers. The requirements contained herein are intended to provide toolholder interchangeability between machining centers with automatic tool changers of various types. This Standard is the inch solution for basic toolholder shank, retention knob, and socket assemblies. This design specifies an interchangeable retention knob with a 45 degree clamping surface.

7/24 Taper Tool to Spindle Connection for Automatic Tool Change

DIN 9833:2006 冲压工具.D型导柱

Tools for pressing - Guide pillars, type D

ISO 10889-1:2004 圆柱形柄刀夹.第1部分:圆柱形柄、定位孔.交货技术条件

ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. This part of ISO 10889 specifies the interchangeability dimensions of the cylindrical shank and location bore, and the dimensions related to data medium. It also specifies the technical delivery conditions of the tool holders.

Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore - Technical delivery conditions

ISO 10889-4:2004 圆柱形柄刀夹.第4部分:矩形轴向座的C形刀柄

ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. This part of ISO 10889 specifies dimensions, designations and complementary technical delivery conditions for tool holders with a rectangular axial seat of types C1 to C4 with cylindrical shank in accordance with ISO 10889-1. For non-standardized tool holders with rectangular axial seat, such as the tool holders shown in the figures, it is advisable to apply the corresponding specifications of this part of ISO 10889.

Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat

ISO 10889-6:2004 圆柱形柄刀夹.第6部分:圆柱状座的E型刀柄

ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. This part of ISO 10889 specifies dimensions, designations and complementary technical delivery conditions for tool holders with cylindrical seat of types E1 to E4 with a mounting system cylindrical shank in accordance with ISO 10889-1. For non-standardized tool holders such as tool holders with a cylindrical seat as shown in the figures, it is advisable to apply the corresponding specifications of this part of ISO 10889.

Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat

ISO 10889-7:2004 圆柱形柄刀夹.第7部分:锥形座的F型刀柄

ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. This part of ISO 10889 specifies dimensions, designations and complementary technical delivery conditions for tool holders with taper seat of type F and with a cylindrical shank mounting system in accordance with ISO 10889-1. For non-standardized tool holders with taper seat, such as the tool holders shown in the figures, it is advisable to apply the corresponding specifications of this part of ISO 10889.

Tool holders with cylindrical shank - Part 7: Type F with taper seat

ISO 10889-2:2004 圆柱形柄刀夹.第2部分:A型专用刀夹柄

ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. This part of ISO 10889 specifies dimensions, designations and complementary technical delivery conditions for tool holders of type A with cylindrical shank in accordance with ISO 10889-1 for tool holders of special designs.

Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs

ISO 10889-3:2004 圆柱形柄刀夹.第3部分:矩形径向座的B形刀柄

ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. This part of ISO 10889 specifies dimensions, designations and complementary technical delivery conditions for tool holders with a rectangular radial seat of types B1 to B8 with cylindrical shank in accordance with ISO 10889-1. For non-standardized tool holders with a rectangular radial seat such as the tool holders shown in the figures, it is advisable to apply the corresponding specifications of this part of ISO 10889.

Tool holders with cylindrical shank - Part 3: Type B with rectangular radial seat

JIS B 5116:2003 模具用支承柱

この規格は，主にプラスチック用金型，ダィカスト用金型，ゴム用金型などのモールド金型に用いるサポートピラについて規定する。

Support pillars for moulds

JIS B 5103:2003 模具用金属推顶杆

この規格は，主にダイカスト金型，プラスチック用金型などのモールド型に用いられるエジェクタピンについて規定する。

Ejector pins for moulds

JIS B 5117:2003 模具用推顶器套管

この規格は，主にダイカスト金型，プラスチック用金型などのモールド型に用いるエジエクタスリープについて規定する。

Ejector sleeves for moulds

JIS B 5121:2003 模具用平推顶杆

この規格は，主にダイカスト金型，プラスチック用金型などのモールド型に用いられる段付き平エジェクタピンについて規定する。

Flat ejector pins for moulds

DIN 6372:2002 工装和夹具用C-型垫圈

C-washer for jigs and fixtures

DIN 6320:2002 工装和夹具用螺纹体支脚

The document specifies the dimensions of feet with threaded shank, to be used in combination with other clamping elements for workpieces of jigs and fixtures on machine tool tables, pallets and clamping devices of workpieces or tools.

Feet with threaded shank for jigs and fixtures

GSA A-A-2532 A-2002 单斜面T形接合

DoD has no registered interest in revisions and amendments to this Commercial Description until further Preparing Activity

BEVELS, SLIDING T

NAVY MIL-R-81574 (2)-2001 救援用的气动手工具

This amendment forms a part of Military Specification MIL-R-81574(AS), dated 1 July 1968 and is approved by the Naval Air Systems Command, Department of the Navy and is available for use by all Department and Agencies of the Department of Defense.

RESCUE HAND TOOL, PNEUMATIC

JIS B 2804:2001 挡圈

この規格は，一般に軸又は穴に使用する止め輪のうち，次の形状のものについて規定する。

Retaining rings

JIS B 5102:2000 压模导柱

この規格は，主にダイカスト金型，プラスチツク用金型などのモールド金型に用いられるガィドピンについて規定する。

Guide pins for moulds

DIN 6371:1999 系留式C型垫圈

Captive C-washers according to the document are components for fixtures. Combined with pan head screws according to DIN 923 and hexagon nuts according to DIN 6331 they can be used on milling, drilling and grinding fixtures (e.g. NC-machining centers) for a quick and simple clamping of the workpiece.#,,#

Captive C-washer

JB/T 54829-1999 槽系列组合夹具元件 产品质量分等

Product quality classification of slot series combined fixture components