J47 手工工具 标准查询与下载

QB/T 1290.4-2010 钢锤 扁尾锤

本标准规定了扁尾锤的产品分类、要求、试验方法、检验规则、标志、标签、包装、运输和贮存。 本标准适用于作业用钢制扁尾锤。

Hand hammers.Cross pein hammers

QB/T 1290.10-2010 钢锤 石工锤

本标准规定了石工锤的产品分类、要求、试验方法、检验规则、标志、标签、包装、运输和贮存。 本标准适用于作业用钢制石工锤。

Hand hammers.Club hammers

QB/T 1290.9-2010 钢锤 木工锤

本标准规定了木工锤的产品分类、要求、试验方法、检验规则、标志、标签、包装、运输和贮存。 本标准适用于作业用钢制木工锤。

Hand hammers.Carpenter's hammers

NF E73-150:2010 气嘴钳 - 尺寸和名称

Pinces à gaz - Dimensions et désignation

ASME B107.500-2010 钳子

This Standard provides performance and safety requirements for pliers and shears. The following pliers are in the scope of this document: - Pliers: diagonal cutting and end cutting; - Pliers: long nose, long reach; - Shears (metal cutting, hand); - Wire Twister; - Pliers: retaining ring; - Pliers: lineman's, iron worker's, gas, glass, fence, and battery; Electronic cutters and pliers; - Pliers: multiple position, adjustable; - Pliers: locking, clamp, and tubing pinch-off

Pliers

ASME B107.100-2010 扁平扳手

This document provides performance and safety requirements for flat wrenches. The following types of wrenches are in the scope of this document: - Combination wrenches; - Adjustable wrenches; - Box wrenches, double head; - Wrench, crowfoot; - Open end wrenches, double head; - Wrenches, flare nut; - Ratcheting box wrenches.

Flat Wrenches (B107.100 - 2010)

ANSI/ASME B107.500-2010 钳子

The purpose of B107.500 is to define essential performance and safety requirements for three types of torques instruments: (a) manually operated torque instruments, commonly used for mechanical measurement of torque for control of the tightness of threaded fasteners, (b) for electronic torque testers used for checking manually operated hand-held torque wrenches and screwdrivers and (c) for manually operated electronic torque instruments with integral or interchangeable heads. It includes requirements for endurance, torque value ranges, and accuracy for these torque instruments. It specifies test methods to evaluate performance related to the defined requirements and safety, and indicates limitations of safe use.

Pliers

ANSI/ASME B107.100-2010 扁平扳手

This standard defines essential performance and safety requirements specifically applicable to combination wrenches, box wrenches, double head, open end wrenches, double head, flare nut, adjustable wrenches, body repair tools and ratcheting box wrenches. It specifies test methods to evaluate performance related to the defined requirements and safety, and indicates limitations of safe use.

Flat Wrenches

ASTM F1505-10 绝缘手工工具标准规范

The performance and durability of the tools covered in this specification are not covered beyond those referenced in the applicable ASME, ANSI, or ISO standards. The technical requirements of this specification either meet or exceed IEC 60900:2004 at the time of issue.1.1 This specification covers the testing of insulated and insulating hand tools used for working on, or in close proximity to, energized electrical apparatus or conductors operating at maximum voltage of 1000 V ac or 1500 V dc. 1.2 The specific use of these tools is beyond the scope of this specification. 1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only. 1.4 The following precautionary caveat pertains to the test method portion only, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This specification does not purport to address all of the safety problems associated with the use of tools on, or in close proximity to, energized electrical apparatus.

Standard Specification for Insulated and Insulating Hand Tools

ASME B107.17-2010 扳手开口用量规和心轴

This document establishes final inspection gage sizes and test mandrel sizes for wrench openings and spark plug wrench openings for inch and metric sizes. This Standard does not cover every available size, but only those most commonly manufactured.

Gages and Mandrels for Wrench Openings

DIN EN 792-12:2009 非电动手持工具.安全要求.第12部分:小循环,小振荡和往复式锯,德文版本EN 792-12:2000+A1:2008

This standard specifies safety requirements on hand-held non-electric reciprcating, small circular and small oscillating power tools for sawing and cutting. The power tools are driven by compressed air, hydraulic fluid, gaseous or liquid fuel or stored energy (e. g. by a spring).

Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws; German version EN 792-12:2000+A1:2008

DIN EN 792-2:2009 非电动手持工具.安全要求.第2部分:切断和卷边电动工具,德文版本EN 792-2:2000+A1:2008

The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: the operator's hand or hands, a harness, -- a suspension, e.g. a balancer. This part, EN 792-2, applies to non-electric, hand-held power tools without rotation, for cutting-off wires, cables, etc., and for crimping for example connectors to cable ends. This part lists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime. Power tools covered by this part of the standard: -- crimping tools without a yoke, cutters, cutting-off tools, cutting pliers. "Double acting hydraulic rescue tools for fire and rescue service use" are not covered by this standard. Special requirements and modifications on a hand-held power tool for the purpose of mounting it in a fixture are not covered by this part.

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools(includes Amendment A1:2008); English version of DIN EN 792-2:2009-12

DIN 382:2009 六角板牙

Hexagonal die-nuts

DIN EN 792-11:2009 非电动手持工具.安全要求.第11部分:剪刀和步冲轮廓机,EN 792-11:2000+A1:2008

The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: -- the operator's hand or hands, -- a suspension, e.g. a balancer. This part, EN 792-11, applies to hand-held, non-electric power tools with a reciprocating movement for nibbling and shearing. This part lists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime. Power tools covered by this part of the standard: -- nibblers, -- shears. Special requirements and modifications on a hand-held power tool for the purpose of mounting it in a fixture are not covered by this part. NOTE At the date of publication no power tools driven by internal combustion engines are known.

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears(includes Amendment A1:2008); English version of DIN EN 792-11:2009-12

DIN EN 792-1:2009 非电动手持工具.安全要求.第1部分:非螺纹机械紧固件装配用电动工具,德文版本EN 792-1:2000+A1:2008

The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: the operator's hand or hands -- a harness -- a suspension, e. g. a balancer. This part, EN 792-1, applies to hand-held non-electric power tools for the installation, tightening or removal of both break stem and non-break stem rivets, bolts, plugs and fasteners from one side of a workpiece into metals, plastics and other materials. This part fists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime. Power tools covered by this part of the standard: -- breakstem fastener, rivet or plug tools, breakstem Iockbolt tools, mandrel loaded riveting tools, rivet nut setter. Special requirements and modifications on a hand-held power tool for the purpose of mounting it in a fixture are not covered by this part. NOTE At the date of publication no power tools driven by internal combustion engines are known.

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners(includes Amendment A1:2008); English version of DIN EN 792-1:2009-12

DIN EN 792-5:2009 非电动手持工具.安全要求.第5部分:旋转冲击式钻机,德文版本EN 792-5:2000+A1:2008

The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: the operator's hand or hands, a harness, -- a suspension, e.g. a balancer. This part, EN 792-5, applies to hand-held, non electric, power tools used for making holes in hard materials like rock and concrete. This part lists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime. Power tools covered by this part of the standard: -- plug hole drills, rock drills, -- rotary hammers. Special requirements and modifications on a hand-held power tool for the purpose of mounting it in a fixture are not covered by this part. For those power tools which are driven by an internal combustion engine the particular safety requirements related to the engine are dealt with in annex C.

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills(includes Amendment A1:2008); English version of DIN EN 792-5:2009-12

DIN 1041:2009 钳工用锤

Machinists' hammers

DIN EN 792-8:2009 非电动手持工具.安全要求.第8部分:檀木和磨光器,EN 792-8:2001+A1:2008的德文版本

EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air or hydraulic fluid and intended to be used by one operator and supported by: -- the operator's hand or hands, a suspension, e.g. a balancer. This part of EN 792 applies to hand-held non electric power tools intended for polishing and sanding with all types of movement e.g. rotary, orbital and reciprocating, using coated abrasive products and bonnets of various soft materials and endless belts. This part lists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime. Power tools covered by this part of the standard: -- belt sanders, orbital sanders, polishers, -- random orbital sanders, rotary sanders straight line sanders. Special requirements and modifications on a hand-held power tool for the purpose of mounting it in a fixture are not covered by this part. NOTE At the date of publication no sanders and polishers driven by internal combustion engines are known.

Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers(includes Amendment A1:2008); English version of DIN EN 792-8:2009-12

BS ISO 4229:2009 螺钉和螺母用装配工具.较低扭转力应用的单头扳手.前端和测试扭矩外形尺寸最大值

Assembly tools for screws and nuts - Single-head engineer's wrenches for lower torque applications - Maximum outside dimensions of heads and test torques

BS ISO 3317:2009 螺钉和螺母用装配工具.电源插座扳手用带有六角或圆柱平面传动的方形传动适配器

Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches