J51 机床零部件 标准查询与下载

GOST 25557-2006 机床工具圆锥基本尺寸

Machine tools tapers. Basic dimensions

KS B ISO 10889-2:2005 圆柱形柄刀夹.第2部分:A型专用刀夹柄

이 규격은 비회전 공구를 사용하는 선반 등의 공작 기계에서 원통형 섕크가 부착된 공구 홀더

Tool holders with cylindrical shank-Part 1:Cylindrical shank, location bore-Technical delivery conditions

KS B ISO 10889-1:2005 圆柱形柄刀夹.第1部分:圆柱形柄、定位孔.交货技术条件

이 규격은 비회전 공구를 사용하는 선반 등의 공작 기계에서 원통형 섕크가 부착된 공구 홀더

Tool holders with cylindrical shank-Part 1:Cylindrical shank, location bore-Technical delivery conditions

CSA B242-05-2005 槽型和肩台型机械管联轴器

This Standard covers groove-type mechanical pipe couplings for liquid and gas pressure pipes up to and including NPS-42 and shoulder-type mechanical pipe couplings for liquid and gas pressure pipes up to and including NPS-60.

Groove- and shoulder-type mechanical pipe couplings Third Edition

BS ISO 10889-1:2004 圆柱形柄刀夹.圆柱形柄、定位孔.交货技术条件

ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. This part of ISO 10889 specifies the interchangeability dimensions of the cylindrical shank and location bore, and the dimensions related to data medium. It also specifies the technical delivery conditions of the tool holders.

Tool holders with cylindrical shank - Cylindrical shank, location bore - Technical delivery conditions

BS ISO 10889-2:2004 圆柱形柄刀夹.A型专用刀夹柄

ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. This part of ISO 10889 specifies dimensions, designations and complementary technical delivery conditions for tool holders of type A with cylindrical shank in accordance with ISO 10889-1 for tool holders of special designs.

Tool holders with cylindrical shank - Type A, shanks for tool holders of special designs

JIS B 6109-2:2005 机床.车床主轴端及工件夹紧花盘的连接尺寸.第2部分:圆柱形连接

この規格は，円筒主軸端と面板及びチャックとの取付面の互換性のための寸法について規定する。

Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 2: Cylindrical connection

JIS B 6109-1:2005 机床.车床主轴端及工件夹紧花盘的连接尺寸.第1部分:锥形连接

この規格は，円すい主軸端(A形)と面板及びチャックの取付面との互換性のための寸法について規定する。

Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 1: Conical connection

JB/T 3022-2004 微动开关

　　本标准规定了微动开关通用的基本要求，包含定义，分类，基本参数，技术要求，试验方法，检验规则，标志、包装、运输和贮存等。 　　本标准适用于在交流50Hz、电压至380V，直流电压至220V的控制或辅助电路中，作控制、信号、联锁之用的开关。

Micro-gap switches

BS ISO 5414-1:2002 扁方筒形柄刀具用的带卡箍螺钉的刀具卡盘(立铣刀刀具卡盘架).第1部分:刀柄传动系统的尺寸

This part of ISO 5414 lays down the dimensions of tool chucks (end mill holders) with clamp screws designed for driving flatted cylindrical shanks in accordance with ISO 3338-2 and specifies the clamp screws used. It also gives the maximum diameter of the chuck nose. This part of ISO 5414 defines two types of drive: — chucks with bores of d1 ≤ 20 mm intended for driving cylindrical shank tools with a single flat, these tools being provided with either a single or a double cutting part; — chucks with bores of d1 ≥ 25 mm intended for driving cylindrical shank tools with a double flat, these tools being provided with a single cutting part only. NOTE The connecting dimensions of the various types of chucks and the designation of tool chucks (end mill holders) with clamp screws are dealt with in ISO 5414-2.

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Dimensions of the driving system of tool shanks

BS ISO 5414-2:2002 扁方筒形柄刀具用的带卡箍螺钉的刀具卡盘(立铣刀刀具卡盘架).第2部分:夹头的连接尺寸和命名

This part of ISO 5414 specifies the dimensions of tool chucks (end mill holders) with clamp screws for tools with flatted cylindrical shanks in accordance with ISO 3338-2. It also specifies the designations of these chucks. Two types of connection are defined: — chucks with 7/24 taper shanks in accordance with ISO 297 for manual changers and with ISO 7388-1 for automatic changers, for tool shanks with either single flat or a double flat for manual and automatic changers; NOTE 1 This part of ISO 5414 specifies the dimensions of tool chucks with 7/24 taper shanks No. 30 for automatic changers although these are not standardized. — chucks with Morse taper shanks in accordance with ISO 296 and ISO 5413 for tool shanks with a single flat only. NOTE 2 The dimensions of the driving system of the tool shanks are dealt with in ISO 5414-1.

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Connecting dimensions of chucks and designation

JB/T 5244-2001 液压阀用电磁铁

本标准规定了电磁铁通用的基本要求，包括特性、正常的的工作条件和安装条件，结构、性能要求及验证电磁铁满足这些要求的试验方法和检验规则等。 本标准适用于在单相交流50Hz、60Hz，电压至380V或单相桥式全波整流（不加小组波装置）直流电压至220V的控制电路中，作电磁阀控制有的开关型液压阀用电磁铁。 本标准不适用于比例阀用电磁铁。

Solenoid

PD R217-016-2000 尖顶元件信息标准1.2.尖顶元件信息标准抽样文件

Pinnacles component information standard 1.2. PCIS sample documents

PD R217-015-2000 尖顶元件信息标准1.2.尖顶元件信息标准指南

Pinnacles component information standard 1.2. PCIS tutorial

DIN 377:2000 符合DIN 10的方头传动刀具用接长杆

Extensions according to this standard are used with hand and machine operated tools if no particular requirements for concentricity are given.

Extensions for tools with driving square according to DIN 10

JB/T 10080.1-2000 光栅数字显示仪表

本标准规定了光栅数字显示仪表的基本参数，技术要求，检验规则，包装与贮运。 本标准适用于以光栅线位移传感器和角位移传感器为检验部件的数显表。

Digital readouts for grating transducer

JB/T 10080.2-2000 光栅线位移传感器

本标准规定了光栅线位移传感器的结构型式和基本参数、技术要求、试验方法、检验规则、标牌、包装、运输及贮存。 本标准适用于以光栅尺为检测元件的线位移传感器。它与光栅数字显示仪表组成线位移测量装置，主要用于机床、仪器的坐标位置显示及数控系统坐标位置反馈。

Linear grating transducer

JB/T 54826-1999 滚珠丝杠副产品质量分等

Ball screw by-product quality classification

ISO 10888:1999 无键型三爪钻头卡盘 技术规范

This International Standard specifies the dimensional characteristics and concentricity tolerance requirements for three-jaw keyless type, self-tightening drill chucks with taper bore or internal thread mounts. It also applies to three-jaw keyless type, hand tightening drill chucks with internal thread mounts. Three classes of chucks are specified, namely: — Heavy (H) — Medium (M) — Light (L) for use in various fields of activity.

Keyless type three-jaw drill chucks - Specification

ISO 10887:1999 有键型三爪钻头卡盘 技术规范

This International Standard specifies the dimensional characteristics and concentricity tolerance requirements for key type three-jaw drill chucks with taper bore or internal thread mounts. Three classes of chucks are specified, namely: — Heavy(H) — Medium (M) — Light (L) for use in various fields of activity. Basic dimensions for three-jaw drill chuck keys are also specified.

Key type three-jaw drill chucks - Specification