J52 机床辅具与附件 标准查询与下载
共找到 1222 条与 机床辅具与附件 相关的标准，共 82 页
本标准规定了机床方形减振垫铁的结构型式及基本参数、技术要求、检验方法、检验规则、标志、包装、运输和贮存。本标准适用于机床方形减振垫铁。
Vibration-absorbing square mounting for machine tool
- ICS
- 25.060.01
- CCS
- J52
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了机床交换齿轮轴端固定快卸圈的基本参数及安装尺寸、标记和技术要求。本标准适用于机床交换齿轮轴端固定。其他机械交换齿轮轴端固定,亦可参照使用。
Quick-change ring for restricting change gears at the shaft end of machine tool
- ICS
- 25.060.99
- CCS
- J52
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了等分分度头的型式和参数、精度检验、要求、标记、检验、标志、包装和随行文件。本标准适用于以槽盘为分度元件的等分分度头(以下简称分度头)。
Direct dividing head
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了丝锥夹头的型式和参数、要求、切削试验、标记、检验、标志、包装和随行文件。本标准适用于具有安全过载保护机构的机用丝锥夹头。
Tap chuck
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了机床减振螺栓的型号、型式、结构与基本参数、技术要求、检验方法、检验规则、标志、包装、运输和贮存。本标准适用于机床减振螺栓。
Vibration-absorbing bolts
- ICS
- 25.060.01
- CCS
- J52
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 9940的本部分规定了工具柄自锁圆锥变径套的精度、技术要求、检验规则、包装、标志和随行文件。本部分适用于机床用的工具柄自锁圆锥变径套 (以苄简称变径套)。
Self holding tapers reduction sleeve for tool shpers.Part 2: Technical specifications
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了机床圆形空气弹簧减振器的型式结构与基本参数、技术要求、检验方法、检验规则、标志、包装、运输和贮存。本标准适用于机床圆形空气弹簧减振器。
Vibration-absorbing air spring round-shaped mounting for machine tool
- ICS
- 25.060.01
- CCS
- J52
- 发布
- 2013-12-31
- 实施
- 2014-07-01
Tools shanks with 7/24 taper for automatic tool changers - Part 3: retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-12-20
- 实施
- 2013-12-20
이 표준은 몰딩용 공구에 사용하기 위한 메인 플레이트[설치판, 형판, 중간판(받침판 및 스트리퍼판),이젝터 플레이트 및 스페이서 블록]에 대하여 규정한다.
Tools for pressing and moulding ― Machined plates ― Part 2: Machined plates for moulds
- ICS
- 25.120.30
- CCS
- J52
- 发布
- 2013-12-03
- 实施
- 2013/12/3
Cutter arbors with parallel key and tenon drive. General dimensions
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-11-30
- 实施
- 2013-11-30
This part of ISO 7388 specifies the dimensions of retention knobs for tool shanks with a 7/24 taper of shank forms A, AD, AF, UC, UD, UF, JD, and JF for automatic tool changers used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270.
Tool shanks with 7/24 taper for automatic tool changers.Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-11
- 实施
Tool shanks with 7/24 taper for automatic tool changers. Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-10-31
- 实施
- 2013-10-31
This part of ISO 10649 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers without automatic tool changers.
Cutter arbors with parallel key and tenon drive.Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-10
- 实施
This part of ISO 10649 specifies the dimensions of cutter arbors with parallel key and tenon drive with hollow taper interface (HSK) with flange contact surface.
Cutter arbors with parallel key and tenon drive.Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-10
- 实施
This part of ISO 10649 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers for automatic tool changer.
Cutter arbors with parallel key and tenon drive.Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-10
- 实施
Tool holders for external and internal turning with hollow taper shank for indexable inserts - Designation
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-09
- 实施
Tool holders for external and internal turning with hollow taper shank for indexable inserts - General survey, Correlation of dimensions
- ICS
- 25.060.20
- CCS
- J52
- 发布
- 2013-09
- 实施
Tool holders for internal turning with cylindrical shank for indexable inserts. Style L
- ICS
- 25.100.10
- CCS
- J52
- 发布
- 2013-06-30
- 实施
- 2013-06-30
Tool holders for internal turning with cylindrical shank for indexable inserts. Style F
- ICS
- 25.100.10
- CCS
- J52
- 发布
- 2013-06-30
- 实施
- 2013-06-30
