共找到 316 条与 车床 相关的标准,共 22 页
JB/T 8601的本部分规定了一般用途和普通精度的轧辊车床的几何精度、工作精度、数控轴线定位精度和重复定位精度检验及相应的公差。本部分适用于最大工件直径400 mm~2500 mm,最大工件长度至12000 mm的普通和数控轧辊车床。
Roll-turning lathes.Part 2: Testing of the accuracy
Machine tools-Test conditions for horizontal spindle turret andsingle spindle automatic lathes-Testing of the accuracy
Machine tools - Safety - Turning machines (ISO 23125:2010 + Amd. 1:2012); German version EN ISO 23125:2010 + A1:2012
Machine tools - Safety - Turning machines - Amendment 1.
JB/T 2322的本部分规定了卧式车床(普通级、精密级)的型式与主要参数。 本部分适用于新设计的床身上最大回转直250mm~1600mm。最大工件长至16000mm的顶尖间最大工件、承载重量小于10t卧式车床(普通级、精密级)。
General purpose parallel lathes.Part 3:Types and parameters
JB/T 8487的本部分规定了活塞车床几何精度和工作精度的要求及检验方法。本部分适用于活塞加工直径为50mm~150mm的精加工活塞车床。
Piston lathes.Part 2:Testing of the accuracy
JB/T 5762的本部分规定了卧式转塔车床、回轮车床及单轴转塔自动车床的型式与主要参数。 本部分适用于新设计的卧式转塔车床、回轮车床及单轴转塔自动车床。
Horizontal spindle turret and single spindle automatic lathes.Part 3:Types and parameters
JB/T 2523的本部分规定了一般用途和普通精度的落地车床的预调检验、几何精度和工作精度检验以及相应的公差。 本部分适用于新设计的无地坑或地坑中最大工件回转直径1600mm~8000mm,顶尖间最大工件长度2000mm~4000mm的普通落地车床。
Faceplate lather.Part 3:Testing of the accuracy
JB/T 3663的本部分规定了重型卧式车床的型式与参数。 本部分适用于新设计的床身上最大回转直径1000mm~5000mm、顶尖间最大工件重量大于或等于10t的一般用途的重型卧式车床。
Heavy duty horizontal lathes.Part 2:Types and parameters
JB/T 8769的本部分规定了凸轮轴车床的几何精度和工作精度的要求及检验方法。 本部分适用于最大工件回转直径至130mm,最大工件长度至1500mm、采用液压仿形刀架加工凸轮形面的凸轮轴车床。
Camshaft lathes.Part 1:Testing of the accuracy
JB/T 8483的本部分规定了一般用途的普通级精度多用车床的几何精度、工作精度的检验方法以及相应的公差。 本部分适用于床身上最大回转直径250mm~400mm、最大工件长度至1000mm的多用车床。 本部分仅适用于机床的精度检验,不适用于机床的运转检查(如振动、非正常的噪声、运动部件的爬行等),或机床的参数检验(如速度、进给量等)。这些检验应在精度检验前进行。
Versatile lathes.Part 1:Testing of the accuracy
JB/T 3317的本部分规定了卡盘多刀车床的系列构成、用途及性能、品种和参数。 本部分适用于新设计的刀架上最大车削直径80mm~500mm的卡盘多刀车床。
Multi-tool chucking lathes.Part 3:Types and parameters
JB/T 8768的本部分规定了高精度卧式车床几何精度和工作精度的要求及检验方法。 本部分适用于床身上最大回转直径为250 mm~500 mm、最大工件长度至1500 mm的高精度卧式车床。
High precision horizontal lathes.Part 1:Testing of the accuracy
JB/T 2523的本部分规定了落地车床的型式与参数。 本部分适用于新设计的无地坑或地坑中最大工件回转直径1600mm~8000mm,顶尖间最大工件长度2000mm~4000mm的一般用途的落地车床。
Faceplate lathes.Part 2:Types and parameters
JB/T 3665的本部分规定了单柱立式车床和双柱立式车床的型式和参数。 本部分适用于新设计的单柱立式车床和双柱立式车床。
Vertical turning and boring lathes with one or two columns.Part 1:Types and parameters
JB/T 3849的本部分规定了仿形车床几何精度和工作精度的要求及检验方法。本部分适用于刀架上最大车削直径至500mm,最大车削长度至2500mm的一般用途的液压仿形车床。 本部分也适用作为车床附件的液压仿形刀架的精度检验。
Copying lathes.Part 2:Testing of the accuracy
This International Standard specifies the requirements and/or measures to eliminate the hazards or reduce the risks in the following groups of turning machines and turning centres, which are designed primarily to shape metal by cutting.
Machine tools - Safety - Turning machines (ISO 23125:2010); German version EN ISO 23125:2010
Machine tools — Safety — Turning machines (First Edition)
Test conditions for numerically controlled turning machines and turning centres - Part 6: Accuracy of a finished test piece
JB/T 10889的本部分规定了卧式车铣复合加工中心的几何精度、位置精度及工作精度的检验条件、检验项目、检验方法及其允差。 本部分适用于床身上最大回转直径至1000mm线性轴线行程至2000mm和回转轴线行程至 360°的卧式铣车复合加工中心的精度检验。 线性轴线行程超过2000mm的卧式车铣复合加工中心亦可参照使用。
Turning-milling machining centers with a horizontal workholding spindle.Part 1: Testing of the accuracy
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号