J55 磨床 标准查询与下载

JB/T 3382.1-2000 卧轴矩台平面磨床.系列型谱

　　本标准规定了磨头移动式、拖板移动式、立柱移动式卧轴矩台平面磨床的系列构成、结构型式、用途、性能特征、品种和参数。 　　本标准适用于新设计的工作台台面宽度125～800mm的一般用途的卧轴矩台平面磨床。

Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Table of series and type

JB 4029-2000 磨床砂轮防护罩安全防护技术要求

本标准规定了砂轮防护罩的技术要求。 本标准适用于外圆磨床和平面磨床用的砂轮防护罩，其它磨床也可参照执行。

Specifications of grinding-wheel guard for safety

JB/T 3770-2000 落地砂轮机

本标准规定了落地砂轮机的分类、技术要求、试验方法、检验规则、标志、包装储存的要求。 本标准适用于最大砂轮直径200～600mm落地砂轮机和除尘砂轮机。

Pedestal grinders

JB/T 9907.2-2000 双端面磨床.技术条件

　　本标准规定了双端面磨床制造和验收的要求。 本标准适用于砂轮外径250～900mm的卧轴双端面磨床和砂轮外径400～750mm的立轴双端面磨床。

Double disc surface grinder.Specifications

JB/T 3382.2-2000 卧轴矩台平面磨床.技术条件

　　本标准规定了卧轴矩台平面磨床的制造和验收要求。 　　本标准适用于工作台台面宽度125～800mm的机床。 　　

Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Specifications

NF E60-124*NF ISO 2433:2000 机床.工作台移动式外圆磨床和万用磨床的检验条件.精度试验

Machines tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy.

DLA A-A-59345-2000 普通外圆磨机 [代替:DLA MIL-G-23368 D CANC 通告 1,DLA MIL-G-23368 D,DLA MIL-G-23368 C,DLA MIL-G-23368 B(1),DLA MIL-G-23368 B,DLA MIL-G-23368 A]

This commercial item description (CID) covers plain, external, cylindrical grinding machines. The machines covered by this CID are intended for use in shops where precision grinding to uniform tolerances for size, roundness, and finish on a wide variety of materials is required.

GRINDING MACHINE, CYLINDRICAL, EXTERNAL, PLAIN [Superseded: DLA MIL-G-23368 D CANC NOTICE 1, DLA MIL-G-23368 D, DLA MIL-G-23368 C, DLA MIL-G-23368 B (1), DLA MIL-G-23368 B, DLA MIL-G-23368 A]

DLA A-A-59175-2000 单轴水平珩床 [代替:DLA MIL-H-80009 B CANC 通告 2,DLA MIL-H-80009 B 有效通告 1,DLA MIL-H-80009 B,DLA MIL-H-80009 A,DLA MIL-H-80009]

This commercial item description (CID) covers single-spindle horizontal honing machines. The honing machines covered by this CID are intended for internal honing of open,blind-end, and interrupted bores generated by a previous forming or machining operation.

HONING MACHINES, HORIZONTAL, SINGLE-SPINDLE [Superseded: DLA MIL-H-80009 B CANC NOTICE 2, DLA MIL-H-80009 B VALID NOTICE 1, DLA MIL-H-80009 B, DLA MIL-H-80009 A, DLA MIL-H-80009]

DLA A-A-59461-2000 干湿磨带压盘磨床和砂纸打磨机 [代替:DLA MIL-G-80176 B CANC 通告 2,DLA MIL-G-80176 B VALID NOTICE 1,DLA MIL-G-80176 B(1),DLA MIL-G-80176 B,DLA MIL-G-80176 A,DLA MIL-G-80176]

The General Services Administration has authorized the use of thiscommercial item description as a replacement for MIL-G-80 176B for all federal agencies.

GRINDING AND SANDING MACHINE, PLATEN, ABRASIVE BELT, WET AND DRY [Superseded: DLA MIL-G-80176 B CANC NOTICE 2, DLA MIL-G-80176 B VALID NOTICE 1, DLA MIL-G-80176 B (1), DLA MIL-G-80176 B, DLA MIL-G-80176 A, DLA MIL-G-80176]

ISO 8636-1:2000 机床 龙门铣床的验收条件 精度检验 第1部分:固定式龙门铣床

This part of ISO 8636 specifies, with reference to ISO 230-1 and ISO 230-2, geometric tests, machining tests and tests for checking accuracy and repeatability of positioning of numerically controlled axes for general purpose, normal accuracy, bridge-type milling machines with a fixed bridge (portal type). This part of ISO 8636 also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 8636 is applicable to machines with moving tables and fixed double columns. It does not include single-column (open sided) machines and those with fixed tables and moving columns. This part of ISO 8636 deals only with the verification of the accuracy of the machine. It does not apply to the testing of the machine operation (vibration, abnormal noise, stick-slip motion of components, etc.) nor to machine characteristics (such as speeds, feeds, etc.), which should generally be checked before testing the accuracy. This part of ISO 8636 provides the terminology used for the principal components of the machine and the designa-tion of the axes with reference to ISO 841 . NOTE In addition to terms used in the three official ISO languages (English, French and Russian), annex A of this part of ISO 8636 gives the equivalent terms in the German and Italian languages; these are published under the responsibility of the member bodies for Germany (DIN) and Italy (UNI). However, only the terms given in the official languages can be considered as ISO terms.

Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 1: Fixed bridge (portal-type) machines

NF E60-123*NF ISO 2407:2000 卧轴式内圆磨床检验条件.精度试验

Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy.

DIN ISO 2407:1999 机床.有水平轴的内圆磨床的试验条件.精度试验

Machine tools - Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy (ISO 2407:1997)

ISO 2433:1999 机床 工作台移动式万能外圆磨床检验条件 精度检验

本标准规定了一般用途的普通精度的工作台移动式外圆磨床、万能外圆磨床及端面外圆磨床的几 何精度、工作精度和轴线的定位精度、重复定位精度的检验方法以及相应的允差。 本标准适用于最大磨削直径50 mm～800 mm、最大磨削长度150 mm～4 000 mm的普通级精度外 圆磨床和万能外圆磨床以及最大磨削直径50 mm～500 mm、最大磨削长度150 mm～3 000 mm的普通 级精度的端面外圆磨床。 本标准仅适用于机床的精度检验，不适用于机床的运转检查(如振动、非正常的噪声、运动部件的爬 行等)，或机床的参数检验(如速度、进给量等)。这些检验应在精度检验前进行。

Machine tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy

DIN ISO 1985:1999 机床.立轴往复工作台的平面磨床的检验条件.精度检验

Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy (ISO 1985:1998)

DIN EN 12628:1999 潜水辅助装置.组合浮力及救生设备.功能和安全技术要求.检验方法

The document specifies minimum safety requirements for performance of combined buoyancy and rescue devices. It is applicable to combined buoyancy and rescue devices for use by divers as defined in 3.1. It does not apply to buoyancy compensators, which are standardized in EN 1809.#,,#

Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, test methods; German version EN 12628:1999

DLA A-A-59477-1999 无心外圆磨床 [代替:DLA MIL-G-80048 C CANC NOTICE 3,DLA MIL-G-80048 C CANC NOTICE 2,DLA MIL-G-80048 C VALID NOTICE 1,DLA MIL-G-80048 C,DLA MIL-G-80048 B(1),DLA MIL-G-80048 B,DLA MIL-G-80048 A,]

This commercial item description (CID) covers external cylinder centerless grinding machines intended for grinding external surfaces of plain, tapered, or contoured cylinders, where centers or chucks can not be used or are impractical to hold the workpiece.

GRINDING MACHINES, CENTERLESS, EXTERNAL, CYLINDRICAL [Superseded: DLA MIL-G-80048 C CANC NOTICE 3, DLA MIL-G-80048 C CANC NOTICE 2, DLA MIL-G-80048 C VALID NOTICE 1, DLA MIL-G-80048 C, DLA MIL-G-80048 B (1), DLA MIL-G-80048 B, DLA MIL-G-80048 A,

DLA A-A-59394-1999 单轴立式珩磨机

This commercial item description (CID) covers vertical knee type milling machines having computer numerical control of x, y, and z (quill) movement with equipment and accessories as described herein.

HONING MACHINE, VERTICAL, SINGLE-SPINDLE

DLA A-A-59351-1999 钻头磨床 [代替:DLA MIL-G-45072 G CANC 通告 1,DLA MIL-G-45072 G,DLA MIL-G-45072 F(1),DLA MIL-G-45072 F,DLA MIL-G-45072 E,DLA MIL-G-45072 D,DLA MIL-G-45072 C(1),DLA MIL-G-45072 C]

This commercial item description (CID) establishes the government acquisition requirements for floor-mounted or bench-mounted grinding machines used to sharpen drill bits.

GRINDING MACHINE, DRILL [Superseded: DLA MIL-G-45072 G CANC NOTICE 1, DLA MIL-G-45072 G, DLA MIL-G-45072 F (1), DLA MIL-G-45072 F, DLA MIL-G-45072 E, DLA MIL-G-45072 D, DLA MIL-G-45072 C (1), DLA MIL-G-45072 C]

DLA A-A-59385-1999 地板固定垂直中导孔磨床

This commercial item description (CID) covers floor-mounted vertical center hole grinding machines and accessories intended for use in finish grinding workpiece center holes which results in dimensionally accurate reference center holes.

GRINDING MACHINE, CENTER HOLE, VERTICAL, FLOOR-MOUNTED

DLA A-A-59389-1999 地板固定工具和切割机磨床

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

GRINDING MACHINE, TOOL AND CUTTER, FLOOR-MOUNTED