J61 铸造设备 标准查询与下载

BS ISO 10072:2004 模铸工具.浇口套.尺寸

This International Standard specifies the main dimensions and tolerances, in millimetres, of sprue bushes that are used mainly in injection moulds for plastics and rubbers (an application example is shown in Figure 1). It also specifies the hardness and designation of sprue bushes conforming to this International Standard.

Tools for moulding - Sprue bushes - Dimensions

ISO 10072:2004 模铸工具.浇口套.尺寸

This International Standard specifies the main dimensions and tolerances, in millimetres, of sprue bushes that are used mainly in injection moulds for plastics and rubbers (an application example is shown in Figure 1). It also specifies the hardness and designation of sprue bushes conforming to this International Standard.

Tools for moulding - Sprue bushes - Dimensions

KS B ISO 8017:2003 浇铸工具.导柱

이 규격은 금형에 사용하기 위한 머리붙이 스트레이트 가이드 핀 및 단붙이 가이드 핀과

Tools for moulding－Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered

KS B ISO 8018:2003 浇铸工具.导套

이 규격은 금형에 사용하기 위한 머리붙이 가이드 부시 및 로케이팅 가이드 부시의 치수

Tools for moulding－Mould guide bushes, headed, and locating guide bushes, headed

KS B ISO 8020:2003 冲压工具.圆柱头冲压机

이 규격은 프레스 금형에 사용하는 펀치 중 자루부의 지름 5∼32 mm 둥근 머리 붙이

Tools for pressing-Punches with cylindrical head and straight or reduced shank

KS B 4140-2002 压铸铸模用主板

이 규격은 아연 합금, 알루미늄 합금 및 마그네슘 합금 다이캐스팅 금형의 메인 플레이트(고

Main plates for die casting metal mould

KS B ISO 10073:2002 模铸工具.支承柱

이 규격은 플라스틱ㆍ고무용 금형, 압축용 다이캐스팅 금형에 사용하는 몰딩용 공구-서포트 필

Tools for moulding－Support pillars

KS B 4143-2002 压铸机铸模用收回杆

이 규격은 다이캐스팅용 금형에 사용하는 리턴 핀에 대하여 규정한다.

Return pins of dies for die casting

JB/T 10349-2002 干式喷砂机

本标准规定了干式喷砂机的定义、分类、技术要求、试验方法和检验规则。 　　本标准适用于以压缩空气为动力，工作压力不大于0.8MPa，以磨料为介质，以表面处理为目的的干式喷吵机。

Dry blast machine

DIN EN 12890 Berichtigung 1:2002 DIN EN 12890-2000-06的技术勘误

Corrigenda to DIN EN 12890:2000-06

ANSI/SPI B151.29-2002 垂直夹紧注模机的制造、保养和使用安全要求

Identifies and addresses known hazards to personnel working on or with the specified machinery. Single copy price: $10.00 Order from: Betty Drake, SPI Send comments (with copy to BSR) to: Same

Safety Requirements for the Manufacture, Care and Use of Vertical Clamp Injection Molding Machines

KS B ISO 8021:2001 冲床模具用圆柱头1段冲压机

이 규격은 프레스 금형에 사용되는 머리붙이 둥근 1단 펀치에 대해서 규정한다.

Tools for pressing－Round punches with cylindrical head and straight shank

BS EN 1248:2001+A1:2009 铸造机械.喷砂设备的安全性要求

This standard specifies requirements to be met by the manufacturer of abrasive blasting equipment for the foreseeable significant hazards due to design, construction and installation, during commissioning, operation, maintenance and decommissioning of the equipment which employ either centrifugal force or compressed air as a means of accelerating abrasive to achieve the desired result. Abrasive blasting equipment covers: -centrifugal blasting machines; -air blasting machines; -loading, conveying and unloading systems for the workpieces. See Annex A for more details. This standard covers all foreseeable significant hazards which could be encountered during the lifetime of the machine as listed in clause 5. This standard does not apply to: -mobile centrifugal blasting equipment; -mobile air blasting equipment; -wet blasting equipment; -the general works compressed air supply system.

Foundry machinery - Safety requirements for abrasive blasting equipment

JB/T 8084.1-2000 冷室压铸机.精度

本标准规定了冷室压铸机的几何精度、检验方法和检验规则。 本标准适用于卧式和立式冷室压铸机。

Cold chamber die casting machines.Testing of the accuracy

JB/T 8084.2-2000 冷室压铸机.技术条件

本标准规定了冷室压铸机的技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于生产有色金属及其合金压铸件、其分型面为垂直布置的卧式和立式冷室压铸机。

Cold chamber die casting machines.Technical requirements

JB/T 8083-2000 压铸机.参数

本标准规定了压铸机的型式和参数。 本标准适用于生产有色金属及其合金压铸件的、分型面垂直布置的各类压铸机。

Die casting machines.Basic parameters

JB/T 6308-2000 离心铸造机.技术条件

本标准规定了离心铸造机的术语，技术要求，几何精度，试验方法和检验规则。 本标准适用于卧式悬臂离心铸造机（直径为大于1m、长度不大于1m）、立式离心铸造机（直径不大于1.8m、高度不高于0.8m）和卧式托轮滚式离习铸造机（直径不大于1m、长度不大于6m）。

Centrifugal casting machine.Technical requirements

NF A89-700-3*NF EN ISO 14744-3:2000 焊接.电子束焊接机的验收检验.第3部分:电子束电流特性的测量

Welding - Acceptance inspection of electron beam welding machines - Part 3 : measurement of beam current characteristics.

NF A89-700-5*NF EN ISO 14744-5:2000 焊接.电子束焊接机的验收检验.第5部分:电子束径向跳动精确度的测量

Welding - Acceptance inspection of electron beam welding machines - Part 5 : measurement of run-out accuracy.

BS EN 12892:2000 铸造.漏泡铸造过程用铸模生产设备

This standard specifies the requirements for tooling for the production of lost patterns by the lost foam process.

Founding. Equipment for the production of lost patterns for the lost foam casting process