铸造设备标准-分析测试百科网

JB/T 8495-2010 台车抛喷丸清理机.技术条件

本标准规定了台车抛喷丸清理机的技术要求、试验方法、检验规则、标志、包装和运输及保存用期等。本标准适用于台车抛喷丸清理机。

Work car shot blastingmachine.Technical requirements

ICS: 25.120.30
CCS: J61
发布: 2010-02-11
实施: 2010-07-01

JB/T 11041-2010 冲天炉单轨加料机.技术条件

本标准规定了冲天炉单轨加料机的技术要求、试验方法、检验规则、产品标志、包装、运输和贮存。本标准适用于冲天炉用固定式单轨加料机(以下简称加料机)。

Single-track hoist for cupola-Technical requirements

ICS: 25.120.30
CCS: J61
发布: 2010-02-11
实施: 2010-07-01

JB/T 11042-2010 冲天炉配加料检测控制系统.技术条件

本标准规定了冲天炉配加料控制、检测系统的技术要求、试验方法和检验规则等。本标准化适用于冲天炉配加料控制和检测系统(以下简称系统)。

Mix and feed measuring and control system for raw material of cupola-Technical requirements

ICS: 25.120.30
CCS: J61
发布: 2010-02-11
实施: 2010-07-01

JB/T 11043.1-2010 冲天炉前炉.第1部分:型式和基本参数

JB/T 11043的本部分规定了冲天炉用前炉的型式和基本参数。本部分适用于冲天炉用固定式前炉和回转式前炉(以下简称前炉)。

Cupola forehearth-Part 1:Types and basic parameters

ICS: 25.120.30
CCS: J61
发布: 2010-02-11
实施: 2010-07-01

DIN EN 869:2009 机械安全.金属压力铸造设备安全要求,德文版本EN 869:2006+A1:2009

This European Standard specifies the safety requirements for pressure metal diecasting units. It applies to pressure diecasting machines and to the interfaces with the following ancillary equipment: die, melting, holding and dosing furnaces (see EN 746-1), metal feeding equipment, inserting and removal devices, spraying appliances, heat exchanger for the die. This ancillary equipment itself is not covered. Additional risks arising from the material being cast are not covered. This standard does not apply to low pressure diecasting machines and/or gravity diecasting machines. This standard deals with all significant hazards, hazardous situations and events relevant to pressure diecasting machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during transport, commissioning, use, de-commissioning and maintenance periods, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment. This document is not applicable to pressure metal diecasting units/machinery which are manufactured before the date of its publication as EN.

Safety of machinery - Safety requirements for pressure metal diecasting units; German version EN 869:2006+A1:2009

ICS
CCS: J61
发布: 2009-12
实施: 2009-12-01

EN 1248:2001+A1:2009 铸造机械.喷砂设备的安全要求

This standard specifies requirements to be met by the manufacturer of abrasive blasting equipment for the foreseeable significant hazards due to design, construction and installation, during commissioning, operation, maintenance and decommissioning of the equipment which employ either centrifugal force or compressed air as a means of accelerating abrasive to achieve the desired result. Abrasive blasting equipment covers: centrifugal blasting machines; air blasting machines; loading, conveying and unloading systems for the workpieces. See Annex A for more details. This standard covers all foreseeable significant hazards which could be encountered during the lifetime of the machine as listed in clause 5. This standard does not apply to: mobile centrifugal blasting equipment; mobile air blasting equipment; wet blasting equipment; the general works compressed air supply system.

Foundry machinery - Safety requirements for abrasive blasting equipment

ICS: 25.120.30
CCS: J61
发布: 2009-04
实施

BS ISO 10073:2008 模铸工具.支承柱

Tools for moulding - Support pillars

ICS: 25.120.30
CCS: J61
发布: 2008-09-30
实施: 2008-09-30

ISO 10073:2008 模铸工具.支承柱

This International Standard specifies the dimensions and tolerances, in millimetres, for support pillars intended for use in pressure die-cast dies and in plastics and rubber moulds. It covers materials and hardness, and specifies the designation of support pillars which meet its requirements.

Tools for moulding - Support pillars