J64 焊接与切割设备 标准查询与下载

NF A82-116:2021 电阻焊. 电极夹和电极帽用锁紧锥

Resistance welding - Locking tapers for electrode holders and electrode caps

NF A89-701-4:2021 高质量焊接和切削用CO2激光束机器的验收试验. 第4部分: 2D移动光学机

Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 4 : machines with 2D moving optics

PNS ISO 14172:2021 焊接耗材.镍和镍合金手工金属电弧焊用覆盖电极.分类

Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification

GMKOREA EDS-M-8512-2020 密封剂点焊（第8版；英语/韩语）

Sealant Spot Welding (8th Edition; English/Korean)

DIN EN 560:2018 气焊设备. 焊接、切割和相关工艺用设备的软管连接件; 德文版本EN 560-2018

This European Standard lays down the dimensions and specifies the characteristics of the constituent parts of hose connections for welding, cutting and allied processes, for example for pressure regulators according to EN ISO 2503 and blowpipes. It does not cover the design of the part of the hose tail inserted into the hose. This is specified in EN 1256.

Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes; German version EN 560:2018

DIN 35224:2018 航空航天应用使用的焊接. 添加剂制造使用基于粉床的激光束机器的验收检验

This standard specifies requirements and test procedures for the acceptance inspection of powder bed based laser beam welding machines for additive manufacturing. This standard can also be used to verify the machine properties for periodical inspections or after maintenance work.

Welding for aerospace applications - Acceptance inspection of powder bed based laser beam machines for additive manufacturing

BS EN 560:2018 气焊设备 用于焊接、切割和相关工艺设备的软管连接

Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes

QB/T 1518-2018 电焊钳技术条件

本标准规定了电焊钳的产品分类、要求、试验方法、检验规则和标志、包装、运输与贮存。 本标准适用于焊条直径不超过10 mm的手工焊条电弧焊用的电焊钳。 本标准不适用于水下焊接用的电焊钳。

Technical requirements for electrode holder

DIN EN ISO 15296:2018 气焊设备.词汇;三种语言版本EN ISO 15296-2018

This document defines a vocabulary of terms and definitions specifically related to gas welding equipment.

Gas welding equipment - Vocabulary (ISO 15296:2017); Trilingual version EN ISO 15296:2018

DIN EN ISO 5175-2:2018 气焊设备.安全装置.第2部分:无火焰(反逆弧)阻止器;(ISO 5175-2-2017);德文版本EN ISO 5175-2-2017

This Part of ISO 5175 specifies the general requirements and tests for safety devices for fuel gases and oxygen or compressed air which do not incorporate a flame (flashback) arrestor used downstream of manifold, cylinder and (or) pipeline outlet regulators, and upstream of blowpipes for welding, cutting and allied processes. This standard does not specify the location of these devices in the gas system. This standard does not include requirements for safety devices which incorporate a flame arrestor which are covered by ISO 5175-1.

Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor (ISO 5175-2:2017); German version EN ISO 5175-2:2017

DIN EN ISO 5175-1:2018 气焊设备.安全性装置.第1部分:使用火焰(反逆弧)阻止器(ISO 5175-1-2017);德文版本EN ISO 5175-1-2017

This Part of ISO 5175 specifies the general requirements and tests for safety devices for fuel gases and oxygen or compressed air incorporating a flame (flashback) arrestor used downstream of manifold, cylinder and (or) pipeline outlet regulators, and upstream of blowpipes for welding, cutting and allied processes. This standard does not specify the location of these devices in the gas system. This standard does not include requirements for safety devices which do not incorporate a flame arrestor which are covered by 5175-2. This standard does not cover the use of safety devices incorporating flame arrestors for applications with premixed oxy/fuel or air/fuel gas supply systems, for example downstream of gas mixers or a generator to produce hydrogen/oxygen mixture by electrolytic decomposition of water.

Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor (ISO 5175-1:2017); German version EN ISO 5175-1:2017

BS EN ISO 14114:2018 气焊设备 用于焊接、切割和相关工艺的乙炔歧管系统 一般要求

Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements

ISO 15296:2017 气焊设备.词汇

Gas welding equipment - Vocabulary

ISO 5175-1:2017 气焊设备.安全性装置.第1部分:使用火焰(反逆弧)阻止器

This document specifies the general requirements and tests for safety devices for fuel gases and oxygen or compressed air incorporating a flame (flashback) arrestor used downstream of manifold, cylinder and/or pipeline outlet regulators, and upstream of blowpipes for welding, cutting and allied processes. This document does not specify the location of these devices in the gas system. This document is not applicable to safety devices not incorporating a flame arrestor, covered by This document does not apply to the use of safety devices incorporating flame arrestors for applications with premixed oxy/fuel or air/fuel gas supply systems, e.g. downstream of gas mixers or a generator to produce hydrogen/oxygen mixture by electrolytic decomposition of water.

Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor

ISO 5175-2:2017 气焊设备.安全装置.第2部分:无火焰(反逆弧)阻止器

Gas welding equipment - Safety devices - Part 2: Devices not incorporating a flame (flashback) arrestor

DB44/T 1992-2017 燃气用聚乙烯管道熔接设备定期检验规则

本标准规定了燃气用聚乙烯管道熔接设备定期检验的术语与定义、总则、检验项目、检验要求、检验方法与判定规则。 本标准适用于在役中的燃气用聚乙烯管道熔接设备性能的检验,包括电熔焊机（仅限电压控制型）、全自动热熔焊机和半自动热熔焊机，其他塑料管道连接用热熔、电熔熔接设备的检验可参照本标准执行。

Regular inspection rules for polyethylene pipe welding equipment for gas

DIN EN 60974-4:2017 电弧焊设备.第4部分:定期检查和试验(IEC 60974-4-2016);德文版本EN 60974-4-2016

Arc welding equipment - Part 4: Periodic inspection and testing (IEC 60974-4:2016); German version EN 60974-4:2016

DIN EN 62822-2:2017 电焊机.人体暴露于电磁场(0 Hz至300 GHz)相关限制的评定.第2部分:弧焊设备(IEC 62822-2-2016);德文版本EN 62822-2-2016

Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment (IEC 62822-2:2016); German version EN 62822-2:2016

JIS C 9300-7:2017 弧焊设备.第7部分:焊炬(枪)

Arc welding equipment -- Part 7: Torches

IEC 60974-1:2017 弧焊设备. 第1部分: 焊接电源

This part of IEC 60974 is applicable to power sources for arc welding and allied processes designed for industrial and professional use, and supplied by a voltage not exceeding 1000 V, battery supplied or driven by mechanical means. This document specifies safety and performance requirements of welding power sources and plasma cutting systems. This document is not applicable to limited duty arc welding and cutting power sources which are designed mainly for use by laymen and designed in accordance with IEC 60974-6. This document includes requirements for battery-powered welding power sources and battery packs, which are given in Annex O. This document is not applicable to testing of power sources during periodic maintenance or after repair. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 AC systems having a nominal voltage between 100 V and 1000 V are given in Table 1 of IEC 60038:2009. NOTE 3 This document does not include electromagnetic compatibility (EMC) requirements.

Arc welding equipment - Part 1: Welding power sources