J70 通用机械与设备综合 标准查询与下载

DLA MS9122 REV A VALID NOTICE 3-2001 0.190-32型开槽十六边螺杆机

MS9122A, dated 22 September 1994, remains inactive for new design, however, the document is valid for acquisition when needed.

SCREW, MACHINE, SLOTTED HEX HEAD, .190-32

DLA MS9123 REV A VALID NOTICE 1-2001 0.190-28型开槽十六边螺杆机

MS9123A, dated 28 February 1984, remains inactive for new design, however, the document is valid for acquisition when needed.

SCREW, MACHINE, SLOTTED HEX HEAD, .250-28

DLA MS9282 REV A VALID NOTICE 1-2001 AMS 6322型钢螺杆机的0.138-36 UNJF-3A型六边黑色二极管

MS9282A, dated 26 October 1972, remains inactive for new design; however, the document is valid for acquisition when needed.

SCREW, MACHINE STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD, .164-36 UNJF-3A

DLA MS9293 REV A VALID NOTICE 1-2001 AMS 6322型钢螺杆机的0.164-36 UNJF-3A型六边单孔钻头黑色二极管

MS9293A, dated 26 October 1972, remains inactive for new design; however, the document is valid for acquisition when needed.

SCREW, MACHINE STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE, HEXAGON HEAD, .164-36 UNJF-3A

KS B 6152-2001 油脂枪

이 규격은 KS B 2801에 따른 니플을 통하여 기계의 윤활 부분에 그리스를 주입하는 데

Grease guns

KS B 6388-2000 短袜编织机

이 규격은 양말의 제조에 있어서 단면 실린더 또는 양면 실린더로 구성된 양말 편기의 구분,

Socks knitting machines

DLA MS33651 REV B NOTICE 1-2000 安装通风轴套联络巷

This notice should be filed in front of MS33651B, dated 3 May 1985.MS33651B is inactive and is no longer to be referenced in new designs.Reference to MIL-L-4343 should be MIL-G-4343.

BOSS AND INSTALLATIONS - AIR CONNECTION

JB/T 10174-2000 钢铁零件强化喷丸的质量检验方法

本标准规定了强化喷丸用弹丸的种类、技术要求，检测装置，喷丸强度及表面覆盖率的测定方法。 本标准适用于钢铁零件强化喷丸的检验。

Methods of quality inspection on shot-peening for steel-iron parts

BOCA IMC-2000 CHAPTER 8-2000 烟囱和通风口

This appendix contains various illustrations and diagrams of typical applications of specific code provisions to one- and two-family dwellings and is intended to illustrate the subject matter of the related text.

Chimneys and Vents

BOCA IMC-2000 CHAPTER 4-2000 通风

The format and provisions of The BOCA National Propero Maintenance Code are designed to provide units of government with an effective regulatory means of providing minimum health and safety requirements for existing buildings and structures.

Ventilation

KS B 4226-1999 送风机

이 규격은 프레스 작업 등에 소재를 공급하는 에어 피더에 대하여 규정한다.

Air feeder

JB/T 9091-1999 微、小型清洗机

本标准规定了用机动往复泵作动力的微、小型清洗机的基本参数、技术条件和试验方法。 本标准适用于泵额定排出压力为3.6～150MPa、额定流量为2.5～45L/m1n、工作介质为常温清水或运动粘度不大于45mm2/S、不含颗粒、无腐蚀性的清洗剂混合液的机动往复式微小型清洗机。

Mini and small typed cleaning machine

JB/T 8917-1999 辊压机

本标准规定了辊压机的基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于水泥、冶金、煤炭等工业部门粉磨脆性物料用的辊压机。

Roller press

JB/T 8916-1999 回转窑

本标准规定了回转窑的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于直径1.6～4.8m的水泥、建材、化工、冶金、造纸等工业部门煅烧熟料用的回转窑。直径超出上述范围时，也可参照使用。

Rotary kiln

JB/T 8914-1999 管磨机

本标准规定了管磨机的产品分类、命名、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于水泥、冶金和化工等工业用的管磨机。

Tube mill

ASME PTC 1-1999 总规程

General Instructions

ARMY MIL-DTL-62461 E-1998 传输装配

This commercial item description covers brown kraft paper used for general wrapping applications.

TRANSMISSION ASSEMBLY

ISO 7131:1997 土方机械 装载机 术语和商业规格

This International Standard establishes terminology and the content of commercial literature specifications for self-propelled crawler and wheel loaders and their equipment. It is applicable to loaders as defined in ISO 6165.

Earth-moving machinery - Loaders - Terminology and commercial specifications

JB/T 8526-1997 高压水射流清洗作业.安全规范

1.1本标准规定了压力不小于10MPa的高压水射流清洗作业的定义、清洗作业队(人员、培训、防护 与事故)、作业前的准备、作业规程和设备维护。 1.2高压水射流清洗作业包括清洗、剥层、破碎、除锈(漆)、清砂等。 1.3本标准适用于高压水射流设备的制造、试验与使用。 1.4本标准不能替代操作与维护设备必须的培训。受训者必须接受专业技术培训并能证明他们具备清 洗作业的知识和能力。

Safety specification for the use of manually operated high pressure waterjet equipment

KS B 6357-1996 自动贩卖机.试验方法

이 규격은 화폐(동전 또는 지폐) 또는 카드(자기 카드 또는 IC 카드)를 사용하여 자동적

Vending machines -Test method