J70 通用机械与设备综合 标准查询与下载

KS B 0058-2004 火力发电术语(燃气涡轮及附属装置)

이 규격은 화력 발전에서 사용되는 가스 터빈 및 부속 장치에 관한 주요 용어에 대하여

Thermal power plant-Gas turbine and auxiliary equipment-Vocabulary

KS B 0072-2004 火力发电术语(内燃机及补助设备)

이 규격은 화력 발전에서 사용하는 내연 기관 중 주로 디젤 기관 및 부속 장치에 관한

Glossary of terms for thermal power plant(Internal combustion engines and auxiliary equipments)

KS B ISO 13984:2004 液压.道路车辆燃油系统界面

이 규격은 연료 충전 과정 중의 화재와 폭발 위험을 감소시키고 인명과 재산 손실로부터

Liquid hydrogen－Land vehicle fuelling system interface

ASME PTC 1-2004 总规程

Most ASME Performance Test Codes are applicable to a specific type of equipment defined by the Code. There may be several subcategories of equipment covered by a single Code. Types of equipment for which PTCs apply can be classified into five broad categories: (a) electrical or mechanical power producing; (b) combustion and heat transfer; (c) fluid handling; (d) emission control, and; (e) allied equipment. The quantities, which characterize performance, defined in each code for the equipment within its scope. Performance characteristics determined by adherence to a PTC can be evaluated as compared to design or predicted characteristics, to previous test results, or they can be used to benchmark or ascertain performance at a particular time. Some PTCs are written as general documents for reference, in support of the equipment PTCs. These can be considered as technical reference material for the equipment codes. Reference material codes can be divided into three types. The first type addresses the measurement of phenomena closely associated with the equipment, such as emissions. The second type covers instrumentation used in the measurement of thermodynamic or process fluid parameters, such as pressure, temperature, flow, and steam quality, and how to analyze the uncertainties associated with measurement of all primary parameters to develop overall test uncertainty is included in this type. Such individual codes referring to process or thermodynamic quantities are known as Performance Test Code Instruments and Apparatus Supplements. They are supplementary to the information on mandatory instrumentation requirements contained in the equipment codes. Instrumentation information in equipment test codes can supersede the information given in these supplements, or these supplements may be referenced by an equipment Test Code where deemed appropriate by the committee. The third type covers miscellaneous general information, and currently consists of PTC 1, "General Instructions," and PTC 2, "Definitions and Values." PTC 2 contains standards for terms, units, values of constants, and technical nomenclature.

General Instructions Performance Test Codes

KS B ISO 14982:2003 农业和林业机械.电磁兼容性.试验方法和验收标准

이 규격은 제조자가 공급한 트랙터와 모든 종류의 이동형(보행형 포함) 농업 기계, 기계

Agricultural and forestry machinery－Electromagnetic compatibility－Test methods and acceptance criteria

KS B ISO 13851:2003 机械安全性.双手控制器.功能问题和设计原理

이 규격은 양수 제어 장치의 안전 요구 조건 및 양수 제어 장치의 입력 신호에 대한 출

Safety of machinery－Two hand control devices－Fundamental aspects and design principles

KS B ISO 12140:2003 农业机械.农用挂车和拖挂设备.牵引杆插孔

이 규격은 농업용 트레일러와 피견인 장비의 드로바 높이를 조정하기 위하여 부속 장비 또

Agricultural machinery-Agricultural trailers and trailed equipment-Drawbar jacks

KS B ISO 13856-1:2003 机械安全性.压敏保护装置.第1部分:压敏垫和压敏地板的设计和试验通用原则

이 규격은 위험한 기계로부터 작업자를 보호해 주는 안전 장치인 압력 감지식 매트와 바닥

Safety of machinery-Pressure-sensitive protective devices-Part 1:General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors

KS B ISO 13849-100:2003 机械安全性.控制系统相关安全部件.第100部分:ISO 13849-1的使用指南

이 규격은 기계류의 안전, 제어 장치의 안전 부품의 사용 및 지침에 대하여 규정한다.

Safety of machinery－Safety-related parts of control systems－Part 100：Guidelines for the use and the application of ISO 13849－1

KS B ISO 14120:2003 机械安全性.保护装置.固定和可移动保护装置的设计与制造要求

이 규격은 주로 기계적 위험으로부터 사람을 보호하기 위한 방호벽의 설계 및 제작에 대하

Safety of machinery－Guards－General requirements for the design and construction of fixed and movable guards

KS B ISO 13769:2003 气瓶.钢印标记

이 규격은 0.5 L초과 3 000 L 이하의 내용적을 갖는 다음과 같은 재충전용 운반

Gas cylinders-Stamp marking

KS B ISO 13916:2003 焊接.预热温度、道间温度和预热维持温度测量的指南

이 규격은 용융 용접시 예열 온도, 층간 온도 및 예열 유지 온도의 측정에 대한 요구

Welding-Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature

KS B ISO 13919-2:2003 焊接.电子束及激光焊接接头.缺欠质量分级指南.第2部分:铝和铝合金

이 규격은 용접용 알루미늄과 알루미늄 합금의 전자 빔 및 레이저 빔 용접부에 있어 결함

Welding－Electron beam and laser beam welded joints－Guidance of quality levels for weld defects－Part 2：Aluminium and its alloys for welding

KS B ISO 13919-1:2003 焊接.电子束及激光焊接接头.缺欠质量分级指南.第1部分:钢

이 규격은 강의 전자 빔과 레이저 용접부 내 결함 기준에 대한 지침에 대하여 규정한다.

Welding－Electron and laser-beam welded joints－Guidance on quality levels for imperfections－Part 1：Steel

KS B ISO 10946:2003 液压传动.隔离式充气蓄能器.优先选择的液压油口

이 규격은 유압 유체 동력 시스템에서 사용되는 분리막이 있는 가스 충전식 축압기용 유압

Hydraulic fluid power-Gas-loaded accumulators with separator-Selection of preferred hydraulic ports

DLA MS9446 (1)-2003 AMS 6304型钢锚杆机的0.5625-18 UNJF-3A型六边钻头镍镉电镀螺杆

This amendment forms a part of MS9446, dated 21 December 1962, and is approved for use by all Departments and Agencies of the Department of Defense.

BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .5625-18 UNJF-3A

DLA MS9447 (1)-2003 AMS 6304型钢锚杆机的0.5625-18 UNJF-3A型六边钻头镍镉电镀螺杆

Delete “AMS 7455” and substitute“AS7455”.

BOLT, MACHINE-STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .625-18 UNJF-3A

DLA MS9445 (1)-2003 AMS 6304型钢锚杆机的0.500-20 UNJF-3A型六边钻头镍镉电镀螺杆

This amendment forms a part of MS9445, dated 21 December 1962, and is approved for use by all Departments and Agencies of the Department of Defense.

BOLT, MACHINE - STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .500-20 UNJF-3A

DLA MS9443 (1)-2003 AMS 6304型钢锚杆机的0.375-24 UNJF-3A型六边钻头镍镉电镀螺杆

This amendment forms a part of MS9443, dated 21 December 1962, and is approved for use by all Departments and Agencies of the Department of Defense.

BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED .375-24 UNJF-3A

DLA MS9439 REV A (1)-2003 AMS 6304型钢螺杆机的0.138-36UNJF-3A型六边钻头镍镉电镀螺杆

This amendment forms a part of MS9439A, dated 13 DECEMBER 1972,and is approved for use by all Departments and Agencies of the Department of Defense.

SCREW, MACHINE-STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .164-36 UNJF-3A