J77 分离机械 标准查询与下载

BS ISO/IEC 90003:2014 软件工程.计算机软件应用ISO 9001-2000的指南

Software engineering. Guidelines for the application of ISO 9001:2008 to computer software

KS I ISO 26762:2014 液压传动.液压过滤器性能特性标记

Hydraulic fluid power ― Marking of performance characteristics on hydraulic filters

DIN EN 12547:2014 离心机.通用安全性要求.德文版本EN 12547-2014

Centrifuges - Common safety requirements; German version EN 12547:2014

BS EN 12547:2014 离心机.通用安全性要求

Centrifuges. Common safety requirements

EN 12547:2014 离心机.通用安全性要求

This European Standard applies to centrifuges for the separation or change in concentration of mixtures of liquids and solids. It gives requirements to minimize the risks caused by the significant hazards arising during the operation of centrifuges. This European Standard gives requirements for minimizing the risks caused by the following hazards: - mechanical hazards common to all types of centrifuges, except those specified in; - ergonomical hazards; - thermal hazards; - electrical hazards; - noise. Types of centrifuges and hazards excluded: Types of centrifuges excluded; - centrifuges with a kinetic energy of rotation less than 200 J; - centrifuges for household use; - centrifuges for laboratory use according to EN 61010-2-020; - centrifuges for forming, i.e. centrifugal hot metal casting machines. Hazards excluded: This European Standard does not deal explicitly with the hazards listed below. NOTE 1 In cases, where such hazards might occur and could become relevant for the construction of the centrifuge, use specific standards for this hazard or make a risk assessment; - hazards caused by overpressure or negative pressure inside the centrifuge housing; - hazards specific to processing radioactive products; - hazards specific to microbiological processing - including viral and parasitic hazards; - hazards from processing corrosive and/or erosive materials; - hazards from processes involving flammable or explosive substances; - hazards caused by leakage of hazardous substances; - hazards caused by unsuitable hygienic design for applications involving food products; - inherent chemical hazards of process materials and/or service media and their biological effects on exposed persons; NOTE 2 Inherently hazardous substances include toxic, carcinogenic and flammable substances for example. Other substances may be hazardous because of their condition in the centrifuge, i.e. temperature, velocity and vapour pressure; - hazards due to construction materials; Materials use

Centrifuges - Common safety requirements

BS ISO 16908:2014 液压过滤器元件试验方法. 热调节和冷启动模拟

Hydraulic filter element test methods. Thermal conditioning and cold start-up simulation

JB/T 11874-2014 分离机械用离心铸造不锈钢筒体

本标准规定了分离机械用离心铸造不锈钢筒体的要求、试验方法、检验规则、标志、包装和质量证明书。本标准适用于分离机械用离心铸造不锈钢筒体(以下简称筒体)。

Stainless steel centrifugal casting cylinder for separation machine

JB/T 10411-2014 离心机、分离机不锈钢锻件超声检测及质量评级

本标准规定了离心机、分离机不锈钢锻件(以下简称锻件)的超声检测方法及缺陷等级评定。本标准适用于以脉冲反射式超声检测检验法对转鼓及环形、筒形和轴形奥氏体不锈钢、双相不锈钢锻件进行超声检测,钛合金锻件可参照本标准执行。

Ultrasonic inspection and quality estimation for stainless steel forging of centrifuge and separator

JB/T 10410-2014 工业用水自动反冲洗过滤器

本标准规定了工业用水自动反冲洗过滤器的术语和定义、型式与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于容器内过滤范围为(0.005~6) mm的工业用水自动反冲洗过滤器(以下简称过滤器)。

Back wash filter for industry water

JB/T 8103.4-2014 碟式分离机  第4部份:胶乳分离机

JB/T 8103的本部分规定了碟式胶乳分离机(以下简称分离机)的术语和定义、型式与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于以氨保存离心法浓缩天然胶乳及合成胶乳浓缩的分离机设计制造和验收。

Disc separator.Part4: Latex disc separator

JB/T 11873-2014 带式真空过滤机  无纺布滤带

本标准规定了带式真空过滤机用无纺布滤带(以下简称滤带)的术语和定义、型式、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于带式真空过滤机用滤带。

Belt vacuum filter.Nonwoven filter belt

ASTM D7919-14(2017) 利用手动或自动过程的过滤杂质分析(FDA)标准指南

5.1 This guide is intended to provide machinery maintenance and monitoring personnel with a guideline for performing filter debris analysis as a means to determine machine condition. Correlating the filter contaminants to ‘normal’ and ‘abnormal’ lube system operation provides early indication of a contaminant or component wear related lube system problem. Analysis of the contaminant collected within the lube filter element provides a tool to identify the failure mode, its rate of progression, and the source of the contamination. 5.2 FDA differs from traditional oil analysis in that the filter is sampled instead of the fluid. Debris from the filter is removed for analysis. FDA is an effective means of monitoring equipment wear because the wear history is efficiently captured in the filter matrix. Typically, more than 958201;% of all released metal particles larger than the filter pore size are captured in the filter (1).5 In addition, other types of particulate contamination, including seal wear material and environmental contaminations are captured, which can also provide diagnostic information. 1.1 This guide pertains to removal and analysis techniques to extract debris captured by in-service lubricant and hydraulic filters and to analyze the debris removed. 1.2 This guide suggests techniques to remove, collect and analyze debris from filters in support of machinery health condition monitoring. 1.3 Debris removal techniques range from manual to automated. 1.4 Analysis techniques vary from visual, particle counting, microscopic, x-ray fluorescence (XRF), atomic emission spectroscopy (AES), and scanning electron microscopy energy dispersive x-rays (SEMEDX). 1.5 This guide is suitable for use with the following filter types: screw on, metal mesh, and removable diagnostic layer filters. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes

JB/T 4333.2-2013 厢式压滤机和板框压滤机 第2部分:技术条件

JB/T 4333的本部分规定了厢式压滤机和板框压滤机的要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于厢式压滤机和板框压滤机(以下简称压滤机)。

Recessed plate filter press & plate and frame filter press.Part 2: Technical specifications

JB/T 4333.3-2013 厢式压滤机和板框压滤机 第3部分:滤板

JB/T 4333的本部分规定了厢式压滤机和板框压滤机的滤板的型式与参数、要求、试验方法、检验规则、包装、运输及贮存。本部分适用于金属滤板、滤框和非金属滤板、滤框。

Recessed plate filter press & plate and frame filter press.Part 3: Filter plate

JB/T 4333.4-2013 厢式压滤机和板框压滤机 第4部分:隔膜滤板

JB/T 4333的本部分规定了厢式压滤机和板框压滤机用塑料隔膜滤板和橡胶隔膜滤板(以下简称隔膜滤板)的技术要求、型式与基本参数、试验方法、检验规则、包装、运输和贮存。本部分适用于化工、制药、食品、环保、矿山等行业压滤机所使用的隔膜滤板。

Recessed plate filter press & plate and frame filter press.Part 4: Membrane plate

JB/T 11715-2013 螺旋卸料离心机用差速器 性能测试方法

本标准规定了螺旋卸料离心机用差速器(以下简称差速器)性能测试的一般要求、测试装置、仪器仪表、环境要求、安装方法、测试顺序及测试方法。本标准适用于螺旋卸料离心机用渐开线行星齿轮差速器及摆线针轮差速器。

Methods of performance testing for scroll discharge centrifuge differential case

JB/T 11714-2013 可控排渣型碟式分离机

本标准规定了可控排渣型碟式分离机的型式与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于可控排渣型碟式分离机(以下简称分离机)。

Controllable discharge disc separator

JB/T 8653-2013 水平带式真空过滤机

本标准规定了水平带式真空过滤机的型式、基本参数、技术要求、试验方法、检验规则与标志、包装、运输和贮存等要求。本标准适用于水平带式真空过滤机(以下简称过滤机)。

Horizontal-belt vacuum filter

JB/T 11713-2013 液体过滤用袋式过滤器

本标准规定了液体过滤用过滤器的型式、基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于温度不大于350℃、黏度不大于50 000 cP、固含量不超过3%的液体过滤用过滤器(以下简称过滤器)。

Bag filter for liquid filtration

JB/T 4333.1-2013 厢式压滤机和板框压滤机 第1部分:型式与基本参数

JB/T 4333的本部分规定了厢式压滤机和板框压滤机的型式和基本参数。本部分适用于卧式厢式压滤机和板框压滤机(以下简称压滤机)。

Recessed plate filter press & plate and frame filter press.Part 1: Types and basic parameters