J78 真空技术与设备 标准查询与下载
共找到 376 条与 真空技术与设备 相关的标准，共 26 页
本标准规定了容积真空泵振动的测量方法。 本标准适用于极限压力低于100Pa，并能直接向大气空间排气的容积真空泵的机械振动测量。
Methods of measurement for mechanical vibation of positive - displacement vacuum pumps
- ICS
- 23.160
- CCS
- J78
- 发布
- 1999-07-12
- 实施
- 2000-01-01
本标准规定了容积真空泵噪声的测量方法。 本标准适用于极限压力低于100Pa，并能直接向大气空间排气的容积真空泵噪声声功率级的测量。
Methods of measurement for noise emitted by positive - displacement vacuum pumps
- ICS
- 23.160
- CCS
- J78
- 发布
- 1999-07-12
- 实施
- 2000-01-01
本标准规定了金属密封真空规管接头的型式与结构尺寸及技术要求。 本标准适用于可烘烤真空系统中真空测量用金属密封的规管接头。
Metal seal connections of vacuum gauges
- ICS
- 23.160
- CCS
- J78
- 发布
- 1999-07-12
- 实施
- 2000-01-01
本标准规定了橡胶密封真空规管接头的型式与结构尺寸及技术要求。 本标准适用于真空系统真空测量用橡胶密封的测量规管接头。
Rubber seal connections of vacuum gauges
- ICS
- CCS
- J78
- 发布
- 1999-07-12
- 实施
- 2000-01-01
本标准规定了真空溅射镀膜设备的型号和基本参数，技术要求，试验方法，榆验规则，标志、包装、运输和贮存等。 本标准适用于压力在1×10^(-4)～5×10^(-3)Pa范围的真空贱射镀膜设备。
Vacuum sputtering coating plant
- ICS
- CCS
- J78
- 发布
- 1999-07-12
- 实施
- 2000-01-01
本标准规定了单级旋片真空泵的型式与基本参数，技术要求，抽样及判定方法，试验方法，检验规则，标志、包装、运输和贮存。 本标准适用于单级、油封旋片真空泵。
Single stage rotary vane vacuum pump
- ICS
- CCS
- J78
- 发布
- 1999-07-12
- 实施
- 2000-01-01
本标准规定了立式涡轮分子泵的型式，基本参数，技术要求，试验方法，检验规则，标志、包装、运输和贮存等。 本标准适用于具有前级泵、变频电源的立式涡轮分子泵。
Vertical turbo molecular pump
- ICS
- CCS
- J78
- 发布
- 1999-07-12
- 实施
- 2000-01-01
Specifies the technical requirements, other than safety and testing, for pumps and pump units.
Rotary positive displacement pumps - Technical requirements
- ICS
- 23.080
- CCS
- J78
- 发布
- 1999-05-15
- 实施
- 1999-05-15
この国際規格は，真空技術に使用する，図記号について規定する。
Vacuum technology -- Graphical symbols
- ICS
- 01.080.20;23.160
- CCS
- J78
- 发布
- 1999-04-20
- 实施
この規格は，蒸気噴射真空ポンプの排気速度の測定方法について規定する。
Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
- ICS
- 23.160
- CCS
- J78
- 发布
- 1999-03-20
- 实施
1.1この規格は，蒸気噴射真空ポンプの臨界背圧測定方法について規定する。
Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure
- ICS
- 23.160
- CCS
- J78
- 发布
- 1999-03-20
- 实施
この規格は，容積移送式真空ポンプの体積流量測定方法について規定する。
Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
- ICS
- 23.160
- CCS
- J78
- 发布
- 1999-03-20
- 实施
JIS B 8316-2:1998は，容積移送式真空ポンプの到達圧力測定方法について規定する。
Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of ultimate pressure
- ICS
- 23.160
- CCS
- J78
- 发布
- 1999-03-20
- 实施
この規格は，真空技術・真空工業に関する主な真空計及び関連用語について規定する。
Vacuum technology -- Vocabulary -- Part 1: General terms
- ICS
- 01.040.23;23.160
- CCS
- J78
- 发布
- 1999-02-20
- 实施
この規格は，真空技術・真空工業に関する主な真空ポンプ及び関連用語について規定する。
Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms
- ICS
- 01.040.23;23.160
- CCS
- J78
- 发布
- 1999-02-20
- 实施
この規格は，真空技術・真空工業に関する主な真空計及び関連用語について規定する。
Vacuum technology -- Vocabulary -- Part 3: Vacuum gauges and related terms
- ICS
- 01.040.23;23.160
- CCS
- J78
- 发布
- 1999-02-20
- 实施
This test method is applicable to any vacuum cleaner that is classified as a utility vac. The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners
- ICS
- 97.080
- CCS
- J78
- 发布
- 1999
- 实施
1.1 This test method covers the procedures for determining air performance characteristics of household central vacuum cleaning systems which use a flexible cleaning hose assembly. This test method does not apply to the carpet cleaning mode of operation, nor does it apply to any operation where dirt or debris is involved. 1.2 This test method and calculations include determination of suction, air flow, air power, maximum air power, and input power under standard conditions. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. Note 1-For more information on air performance characteristics, see Ref (1) through (7). 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement is given in Note 2.
Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
- ICS
- 97.080 (Cleaning appliances)
- CCS
- J78
- 发布
- 1999
- 实施
이 규격은 조로 가정에서 난방시 보일러(70kW 이하)에 의하여 가열된 온수를 방열기로 보
Hot-water circulating pumps for boiler
- ICS
- 27.060.30
- CCS
- J78
- 发布
- 1998-12-07
- 实施
- 1998-12-07
JB/T 5279-1998 本标准上对JB/T 5279.1-91和JB/T 5279.2-91的修订。 本标准规定了振动流化床干燥机的结构型式，基本参数，要求，试验方法，检验规则及标志、包装、运输、贮存等要求。 本标准适用于由激振电机驱动的卧式振动流化床干燥机。
Vibration fluidized-bed dryer
- ICS
- 71.120.30
- CCS
- J78
- 发布
- 1998-03-19
- 实施
- 1998-07-01
