J84 凿岩机械 标准查询与下载
共找到 158 条与 凿岩机械 相关的标准，共 11 页
本标准规定了压铸件的分类及级别,基本尺寸公差等级,化学成分检验,力学性能检验,压铸件的铸造斜度,压铸螺纹,加工余量,表面形状及位置公差,清理,表面质量和交付。 本标准适用于凿岩机械与气动工具用压铸铝合金铸件。
General specifications of pressuredie-castings of cast aluminium alloys of rock drilling machines and pneumatic tools
- ICS
- CCS
- J84
- 发布
- 1999-06-28
- 实施
- 2000-01-01
JB/T 8684-1998 本标准规定了凿岩机械与气动工具产品在设计、制造、使用和维护中的一般安全要求。 本标准适用于凿岩机械与气动工具产品。
Safety requirements for rock drilling machines and pneumatic tools
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 1998-03-19
- 实施
- 1998-07-01
本标准规定了导轨式凿岩机的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于以压缩空气为动力的导轨式凿岩机。
Drifters
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 1998-03-19
- 实施
- 1998-07-01
This CID covers gasoline-engine-driven, hand-held, heavy-duty, two-man operation, portable type earth auger.
AUGER, EARTH, PORTABLE; HAND-HELD TWO-MAN GASOLINE ENGINE DRIVEN
- ICS
- CCS
- J84
- 发布
- 1998-01-12
- 实施
This International Standard presents definitions of terms and specifies safety requirements and test procedures applicable to hand-fed powered shredders and chippers, including those which have vacuum assisted collection and are used in a stationary position and are designed primarily for use with organic material at and around the home. This International Standard does not apply to shredders and chippers with feed openings greater than 400 mm × 400 mm measured at the relevant safety distance to the cutting means. This International Standard does not specify requirements for units powered by an external power source or for powered discharge units intended to broadcast material or load vehicles. Mechanically powered feed intake machines or attachments are excluded from this International Standard, as are machines for which the cutting means is either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J. The electrical aspects of electrically powered shredder/grinders and shredder/baggers having a voltage exceeding 42 V d.c. or mains connected are not covered by this International Standard.
Powered shredders and chippers - Definitions, safety requirements and test procedures
- ICS
- 65.060.99
- CCS
- J84
- 发布
- 1997-08
- 实施
Specifies the types, general requirements and dimensions of mechanical pullers, their attachments and adaptors.
Operation and maintenance of earth-moving machinery. Specification for service tools. Mechanical pullers and pushers
- ICS
- 53.100
- CCS
- J84
- 发布
- 1997-06-15
- 实施
- 1997-06-15
Specifies the design, manufacture and performance characteristics of two types of nozzle.
Operation and maintenance of earth-moving machinery. Specification for lubrication fittings. Grease-gun nozzles
- ICS
- 53.100
- CCS
- J84
- 发布
- 1997-06-15
- 实施
- 1997-06-15
Specifies the design, manufacture, performance characteristics and the space required to service these fittings.
Operation and maintenance of earth-moving machinery. Specification for lubrication fittings. Nipple type
- ICS
- 53.100
- CCS
- J84
- 发布
- 1997-05-15
- 实施
- 1997-05-15
本标准规定了凿岩机械与气动工具产品的噪声限值。 本标准适用于凿岩机械与气动工具产品中凿岩机、矿用隔爆电动岩石钻、气镐、气铲、气动捣固机、气动铆钉机、气钻、气动砂轮机、冲击式气扳机、气动螺丝刀、气动磨光机、气动捆扎拉紧机和气动马达。
Noise Limits of Rock Drilling Machinery and Pneumatic Tools
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 1997-04-15
- 实施
- 1998-01-01
本标准规定了履带式露天钻车的型式，基本参数与尺寸，技术要求，试验方法与检验规则和标志、包装、运输及贮存。 本标准适用于CL10、CL15、CLY20和CLN30型履带式露天钻车。
Tracked Surface Drilling Rig
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 1997-04-15
- 实施
- 1998-01-01
本标准规定了凿岩机械与气动工具产品型号的编制方法。 本标准适用于凿岩机械与气动工具产品型号的编制，不适用于钢丝绳式冲击钻机和牙轮钻机的型号编制。
Modeling method of rock drilling machinery and pneumatic tools
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 1996-09-03
- 实施
- 1997-07-01
本标准规定了陆地钻机用装有电子器件的电控设备(即钻机电传动系统)的技术要求、检验、标志、包装、运输、贮存。 本标准适用于陆地钻机所使用的装有电子器件的电控设备及相关的接口电路，司钻电控台，司泵电控台，脚踏主令控制器及成套的发电机控制设备。 注:本标准所指的“陆地”条件仅指普通的大陆气候条件，不适用于沙漠气候条件。
Electric control equipment with electronic devices for drilling machine on the ground
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 1995-11-24
- 实施
- 1996-06-01
本标准规定了凿岩机械与气动工具产品清洁度检测所需的清洗液、仪器、器具和清洗、脱脂、过滤、烘干、称重等程序的操作要求。 本标准适用于凿岩机械与气动工具产品清洁度的检测，但不适用于液太凿岩机械清洁度的检测。
General testing method for cleanliness of rock drilling machinery and pneumatic tools
- ICS
- 73.100
- CCS
- J84
- 发布
- 1994-07-18
- 实施
- 1995-07-01
本标准规定了凿岩机械与气动工具铸造铝合金的化学成分、机械性能、晶粒度、含气量及变质效果等。 本标准适用于凿岩机械与气动工具铸造用铝合金。
General technical specifications for cast aluminum alloys for rock drilling machinery and pneumatic tools
- ICS
- CCS
- J84
- 发布
- 1994-07-18
- 实施
- 1995-07-01
本标准规定了凿岩机械与气动工具产品的包装方式、技术要求、防护、包装标志、试验方法与检验规则。 本标准适用于凿岩机械与气动工具产品的内销外包装。
General technical requirements for product packaging of rock drilling machinery and pneumatic tools
- ICS
- CCS
- J84
- 发布
- 1994-07-18
- 实施
- 1995-07-01
本标准规定了手持式凿岩机的型式与基本参数、技术要求、检验规则、试验方法和标志、包装、运输与贮存。 本标准适用于以压缩空气为动力的手持式凿岩机。
Handheld Rock Drill
- ICS
- CCS
- J84
- 发布
- 1994-07-18
- 实施
- 1995-07-01
General technical specifications for structural steel investment castings of rock drilling machinery and pneumatic tools
- ICS
- CCS
- J84
- 发布
- 1993-11-21
- 实施
- 1994-03-01
General technical conditions for assembly of rock drilling machinery and pneumatic tools
- ICS
- CCS
- J84
- 发布
- 1993-11-21
- 实施
- 1994-03-01
本标准规定了手持式内燃凿岩机的技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于手持式内燃凿岩机。
Handheld Internal Combustion Rock Drill
- ICS
- CCS
- J84
- 发布
- 1993-11-21
- 实施
- 1994-03-01
