K04;L04 标准查询与下载

SN/T 3467.1-2013 电子电气产品中多氯萘的测定 气相色谱-质谱法

SN/T 3467的本部分规定了电子电气产品中多氯萘含量的气相色谱-质谱检测方法。本部分适用于电子电气产品聚合物部件中多氯萘的测定。

Determination of polychlorinated naphthalenes in electrical and electronic products.Gas chromatorgaphy-mass spectrometry

SN/T 3531-2013 进出口电子电器产品待机和关机功耗评价方法

本标准规定了电子电器产品待机和关机功耗评价方法的通用要求，对电子电器产品的待机和关机功耗提出限值要求、测试方法和检验规则。本标准适用于额定电压不超过250V，工作时接电网电源，面向终端用户的电子电器产品。本标准中涉及的电子电器产品特指家用电器、家庭(办公)信息技术设备和娱乐性设备，参见附录A。

Evaluation method for standby and off mode electric power consumption of electrical and electronic appliances for import and export

DIN EN 50581:2013 关于有害物质禁用指令的电子电气产品评价的技术文件.德文版本EN 50581-2012

Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances; German version EN 50581:2012

BS EN 50581:2012 关于有害物质限制的电气和电子产品评估用技术文件

Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances

ANSI/ISA 61010-1(82.02.01)-2012 测量,控制和实验室用电气设备的安全性要求.第1部分:通用要求

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General requirements

SN/T 2592.6-2011 电子电气产品中有机锡化合物的测定.第6部分：电感耦合等离子体原子发射光谱法

SN/T 2592的本部分规定了电子电气产品中有机锡的电感耦合等离子体原子发射光谱测定方法。 本部分适用于电子电气产品塑料部件中有机锡的测定。

Determination of organotin compounds in electrical and electronic equipment. Part 6:Inductively coupled plasma atomic emission spectrometry

SN/T 2592.5-2011 电子电气产品中有机锡化合物的测定.第5部分：气相色谱-质谱法

SN/T 2592的本部分规定了电子电气产品中9种有机锡化合物(见附录A)的气相色谱-质谱(GC-MS)测定方法。 本部分适用于电子电气产品塑料部件中一甲基锡(MMT)、二甲基锡(DMT)、一丁基锡(MBT)、二丁基锡(DBT)、三丁基锡(TBT)、一辛基锡(MOT) 、二辛基锡(DOT)、三辛基锡(TOT)、三苯基锡(TPhT)的测定。

Determination of organotin compounds in electrical and electronic equipment. Part 5:Gas chromatography-mass spectrometry

SN/T 2592.4-2011 电子电气产品中有机锡化合物的测定.第4部分：液相色谱-质谱法

SN/T 2592的本部分规定了电子电气产品塑料部件中三丁基锡(TBT)、三苯基锡(TPhT)和三辛基锡（TOT)(见附录A)含量的的液相色谱-质谱(LC-MS）测定方法。 本部分适用于电子电气产品品塑料部件中三丁基锡(TBT)、三苯基锡(TPhT)和三辛基锡(TOT)含量的测定。

Determination of organotin compounds in electrical and electronic equipment.Part 4:High performance liquid chromatography-mass spectrometry

SN/T 2003.7-2011 电子电气产品中铅、汞、镉、铬、溴的测定.第7部分：激光诱导定性筛选法

警告—激光诱导击穿光谱（LIBs）使用了高强度的激光，该激光在击穿样品时会产生高亮度的等离子，因此使用过程中必须遵守仪器生产商所申明的操作要求。 SN/T 2003.7的本部分规定了电子电气产品中铅、汞、镉、铬、溴的激光诱导击穿光谱定性筛选方法。 本部分是用于电子电气产品中铅、汞、镉、铬、溴的定性筛选。

Screening method of lead,mercury,cadmium,chromium and bromine in electrical and electronic equipments.Part 7:Laser induced breakdown spectroscopy

SN/T 3019.1-2011 电子电气产品中卤素的测定.第1部分：氧弹燃烧-离子色谱法

SN/T 3019的本部分规定了氧弹燃烧离子色谱法测定电子电气产品中卤素的方法。 本部分适用于电子电气产品中卤素(氯和溴)的测定。方法检出限:氯50mg/kg,溴50mg/kg。

Determination of halogen in electrical and electronic products.Part 1:Oxygen bomb combustion-Ion chromatography

JIS C 60068-2-27:2011 环境试验.第2-27部分:试验Ea:冲击

This Standard specifies the shock test for components, equipment, and other electrotechnical products which during transportation, storage and handling, or in use, may be subjected either to conditions involving relatively infrequent non-repetitive or repetitive shocks.

Environmental testing -- Part 2-27: Tests -- Test Ea: Shock

ANSI/EIA 364-1005:2011 确定摩擦腐蚀接触面敏感性的环境试验方法

This standard describes recommended test sequences to determine the susceptibility of contacts to fretting corrosion that is a major and significant failure mechanism that can be caused by vibration and thermal cycling.

Environmental Test Methodology for Determining the Susceptability of Contacts to Fretting Corrosion

BS EN 60068-2-53:2010 环境试验.试验和指南.组合气候(低温和湿度)和动态(振动/震动)试验

This part of IEC 60068 provides a description of test methods and guidance for testing equipment or components under combined climatic and dynamic conditions. The purpose of combined testing is to investigate to what extent the equipment or components are affected by combined climatic and dynamic tests. The method of combined tests detects electrical, mechanical or other physical variations.

Environmental testing - Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests

BS EN 60068-2-38:2009 环境试验.试验方法.试验.试验Z/AD:混合温度/湿度循环试验

IEC 60068-2-38 provides a composite test procedure, primarily intended for component type specimens, to determine, in an accelerated manner, the resistance of specimens to the deteriorative effects of high temperature/humidity and cold conditions.

Environmental testing - Tests - Test Z/AD - Composite temperature/humidity cyclic test

ANSI/NEMA 62430-2010 电气和电子产品用环境意识设计

This Environmentally Conscious Design for Electrical and Electronic Products standard specifies requirements and procedures to integrate environmental aspects into design and development processes of electrical and electronic products, including combination of products, and the materials and components of which they are composed. The existence of this standard does not preclude particular sectors from generating their own, more specific, standards or guidelines.

ENVIRONMENTAL CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS

NF C05-101*NF EN 62430:2009 电气和电子产品的环境意识设计

Environmentally conscious design for electrical and electronic products.

BS DD IEC/PAS 62545:2009 电气和电子设备的环境信息(EIEEE)

Environmental information on electrical and electronic equipment (EIEEE)

IEEE 100-2009 标准词典.术语和定义词汇表

Standards Dictionary - Glossary of Terms & Definitions

ASME Y14.44-2008 电气和电子部件及设备用参考命名法

This Standard covers the formation and applicationof reference designations for electrical and electronicsparts and equipment.The reference designations of this Standard areintended for uniquely identifying and locating discreteitems on diagrams and in a set; for correlating items ina set; graphic symbols on diagrams; and items in partslists, circuit descriptions, and instructions.This Standard includes three methods for forming andapplying reference designations.(a) the unit numbering method(b) the location numbering method(c) the location coding methodA complete reference designation may incorporatereference designations formed by the use of any of thesemethods at any level from basic parts to complete units.The unit numbering method has a long history ofsatisfactory use in all types of electrical and electronicsequipment. The location numbering method and locationcoding method have been developed to permit arapid physical location of items in large, complicatedequipment featuring multiple use of many identical orclosely similar items. These methods shall be applied insuch a way that duplicate complete reference designationsdo not occur in a piece of equipment or system.Device function designations for power switchgearand industrial control use are not covered by thisStandard.

Reference Designations for Electrical and Electronics Parts and Equipment

BS EN 60068-2-30:2005 环境试验.第2-30部分:试验.试验Db:循环湿热试验(12h+12h循环)

This part of IEC 60068 determines the suitability of components, equipment or other articles for use, transportation and storage under conditions of high humidity – combined with cyclic temperature changes and, in general, producing condensation on the surface of the specimen. If the test is being used to verify the performance of a specimen whilst it is being transported or stored in packaging then the packaging will normally be fitted when the test conditions are being applied. For small, low mass specimens, it may be difficult to produce condensation on the surface of the specimen using this procedure; users should consider the use of an alternative procedure such as that given to IEC 60068-2-38.

Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)