K09 卫生、安全、劳动保护 标准查询与下载

IEC TR 60479-5:2007/COR1:2013 电流对人和家畜的影响.第5部分:生理效应接触电压阈值.勘误表1

Effects of current on human beings and livestock - Part 5: Touch voltage threshold values for physiological effects; Corrigendum 1

IEC TS 60479-1:2005/COR2:2013 电流对人类和家畜的影响.第1部分:一般方面.勘误表2

Effects of current on human beings and livestock - Part 1: General aspects; Corrigendum 2

IEC 60335-2-76:2013 家用和类似用途电器.安全性.第2-76部分:电篱网激发器的详细要求

This International Standard deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V and by means of which fence wires in agricultural,domestic or feral animal control fences and security fences may be electrified or monitored.

Household and similar electrical appliances.Safety.Part 2-76: Particular requirements for electric fence energizers

IEEE Std C2/COR-2012 2012版勘误表.国家电气安全规程.勘误表

National Electrical Safety Code

IEC 61557-10:2013 防护测量的测试、测量和监测用1000 V交流和1500 V直流设备的低压分配系统中的电气安全性.第10部分:测试、测量或防护手段监测用复合测量设备

This part of IEC 61557 specifies the requirements for combined measuring equipment which combines into one piece of apparatus, several measuring functions or methods of testing,measuring or monitoring according to the respective parts of IEC 61557.

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measur

SAE J1908-2013 电气接地实施规程

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Standard outlines general procedures for the grounding of electrical components in both 12- and 24-V systems, intended for light and heavy-duty on-highway trucks and their trailers; and off-road machinery applications as described in SAE J 1116. The voltage drops specified throughout this document are for a 12-V system. For 24-V systems, the allowable voltage drops may be doubled. These voltage drops are nominal a

Electrical Grounding Practice

KS C IEC 61201:2013 常规接触电压限值的使用.应用指南

이 표준은 기술표준으로 IEC/TR 60479-5에 나타난 접촉전압 한계에 대한 일반적인

Use of conventional touch voltage limits－Application guide

ANSI/ESD SP5.2.1-2013 静电放电敏感度试验ESD协会标准操作规程.机械模型(MM)更替测验方法:供应电源插脚机械连接.元件等级

ESD Association Standard Practice for Electrostatic Discharge Sensitivity Testing -Machine Model (MM) Alternative Test Method: Supply Pin Ganging - Component Level

IEC 31/1033/DTS:2012 IEC/TS 60079-32-1, Ed. 1:爆炸性气体环境.第32-1部分:静电危害指南

IEC/TS 60079-32-1, Ed. 1: Explosive atmospheres - Part 32-1: Electrostatic hazards, Guidance

NF C42-198-13*NF EN 61557-13:2012 1000 V交流和1500 V直流低压配电系统电气安全性.保护措施试验,测量或监测用设备.第13部分:泄漏测量用手持和用手控制电流夹件和传感器

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: hand-held and hand-manipulated current clamps and sensors for measurement of leaka

BS EN 61010-2-033:2012 测量, 控制和实验室用电气设备的安全要求. 家用的和专业用的测量电源电压的手持式万用表和其他手持式表的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage

DIN EN 61557-13:2012 最高可达1000 V 交流电和1500 V 直流电的低压配电系统的电气安全性.防护测量的试验,测量或监测设备.第13部分:漏电测量的手提式和手动操作式电流夹钳和传感器

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage

NF C18-510:2012 电网操作和电气环境条件下的安装.电气风险防护

Operations on electrical network and installations and in an electrical environment - Electrical risk prevention.

IEEE Std C2-2012 国家电气安全规范

National Electrical Safety Code

ANSI/UL 6420-2012 用于系统绝缘和作为单一机组设备的安全性标准

Standard for Safety for Equipment Used for System Isolation and Rated as a Single Unit

IEEE 3007.3-2012 工业和商用电力系统电气安全性IEEE推荐性操作规程

IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems

ANSI/NFPA 70E-2012 工作场所电气安全标准

90.2 Scope. (A) Covered. This standard addresses electrical safety requirements for employee workplaces that are necessary for the practical safeguarding of employees during activities such as the installation, operation, maintenance, and demolition of electric conductors, electric equipment, signaling and communications conductors and equipment, and raceways for the following: (1) Public and private premises, including buildings, structures, mobile homes, recreational vehicles, and floating buildings (2) Yards, lots, parking lots, carnivals, and industrial substations (3) Installations of conductors and equipment that connect to the supply of electricity (4) Installations used by the electric utility, such as office buildings, warehouses, garages, machine shops, and recreational buildings, that are not an integral part of a generating plant, substation, or control center (B) Not Covered. This standard does not cover the following: (1) Installations in ships, watercraft other than floating buildings, railway rolling stock, aircraft, or automotive vehicles other than mobile homes and recreational vehicles (2) Installations underground in mines and self-propelled mobile surface mining machinery and its attendant electrical trailing cable (3) Installations of railways for generation, transformation, transmission, or distribution of power used exclusively for operation of rolling stock or installations used exclusively for signaling and communications purposes (4) Installations of communications equipment under the exclusive control of communications utilities located outdoors or in building spaces used exclusively for such installations (5) Installations under the exclusive control of an electric utility where such installations: a. Consist of service drops or service laterals, and associated metering, or b. Are located in legally established easements or rights-of-way designated by or recognized by public service commissions, utility commissions, or other regulatory agencies having jurisdiction for such installations, or c. Are on property owned or leased by the electric utility for the purpose of communications, metering, generation, control, transformation, transmission, or distribution of electric energy.

Standard for Electrical Safety in the Workplace«

BS 7430:2011+A1:2015 电气装置的保护接地实施规程

Code of practice for protective earthing of electrical installations

BS 7430:2011 电气装置的保护接地实施规程

This British Standard primarily provides recommendations and guidance on meeting the requirements for the earthing of electrical installations, including: a) protective earthing of low voltage installations to BS 7671-2008+A1; b) the interface between LV and HV substations of 11 000/400 V to BS EN IEC 61936-1-2011 within buildings; and c) protective earthing and changeover switch arrangements for generators supplying low voltage installations. The earthing of a system or installation is generally provided for reasons of safety. This British Standard applies only to land-based installations in and around buildings. It does not apply to: 1) ships, aircraft or offshore installations; 2) earthing of medical equipment [see BS EN 60601 (all parts)]; 3) special problems encountered with solid state electronic components; 4) equipment sensitive to static electricity; 5) requirements for functional earthing; 6) earthing of overhead lines between electrical installations; or 7) the internal earthing of equipment.

Code of practice for protective earthing of electrical installations

UL SUBJECT 2744-2011 智能环境产品安全性调查大纲

1.1 These requirements apply to: a) Products intended to receive and react to communication data in the smart environment, also known as smart enabled products; b) Products identified as being compatible with communication environments associated with (a), or those which are not smart enabled, but compatible with smart enabled products; and c) Products intended to interact with communication data and control products that do not otherwise react to communication data. 1.2 Products covered by 1.1(a) are commonly identified as “smart” products or “smart enabled” and are intended to interact with the “Smart Grid” described by the Energy Independence and Security Act of 2007. 1.3 Products covered by 1.1(b) are not specifically identified for interaction with the “Smart Grid” but are identified as being compatible with that environment. Such products incorporate features such that they do not interact with or modify responses of other products connected to the power distribution system, and they are not adversely affected by other devices or communications associated with the environment in which they are installed. 1.4 Products covered by 1.1(c) are enabler devices intended to interact with the ²Smart Grid² and interface with devices that are not otherwise smart enabled. 1.5 These requirements supplement those specified in the applicable end-product Standard for Safety. Where the end-product Standard includes requirements that achieve the intent of these requirements as applicable to the specific product, the end-product Standard takes precedence.

Outline of Investication for Safety of Products in Smart Environments