K09 卫生、安全、劳动保护 标准查询与下载

NRS 040-5-2007 高压操作条例.第5部分:发布操作说明的标准程序及术语

Defines a procedure and terminology for control and field staff interaction when operating medium-voltage and high-voltage apparatus.

High-voltage operating regulations Part 5: Standard procedure and terminology for the issuing of operating instructions

DIN IEC/TS 60479-1:2007 电流对人类和家畜的影响.第1部分:一般情况(IEC/TS 60479-1-2005+勘误2006)

Effects of current on human beings and livestock - Part 1: General aspects (IEC/TS 60479-1:2005 + Corrigendum October 2006)

IEC TS 60479-2:2007 电流通过人类和家畜的影响.第2部分:特殊方面

IEC 60479-2, which is a technical specification, describes the effects on the human body when a sinusoidal alternating current in the frequency range above 100 Hz passes through it. The effects of current passing through the human body for – alternating sinusoidal current with d.c. components, – alternating sinusoidal current with phase control, – alternating sinusoidal current with multicycle control, are given but are only deemed applicable for alternating current frequencies from 15 Hz up to 100 Hz. NOTE 1 Other waveforms are under consideration. This standard furthermore describes the effects of current passing through the human body in the form of single unidirectional rectangular impulses, sinusoidal impulses and impulses resulting from capacitor discharges. NOTE 2 The effects of sequences of impulses are under consideration. The values specified are deemed to be applicable for impulse durations from 0,1 ms up to and including 10 ms. For impulse durations greater than 10 ms, the values given in Figure 20 of IEC 60479-1 apply. This standard only considers conducted current resulting from the direct application of a source of current to the body, as does IEC 60479-1 and IEC 60479-3. It does not consider current induced within the body caused by its exposure to an external electromagnetic field.

Effects of current passing through the human beings and livestock - Part 2: Special aspects

IEC 61557-8:2007/COR1:2007 交流1000V和直流1500V以下低压配电系统中的电气安全.防护措施的测试、测量或监测用设备.第8部分:信息技术(IT)系统用绝缘监测装置.技术勘误1

This standard is about Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems; Corrigendum 1

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems; Corrigendum 1

SANS 10222-2:2007 电气安全装置．第2部分：可及控制

Establishes general principles for the planning, design, installation, operation and maintenance of access control systems.

Electrical security installations Part 2: Access control

SANS 10222-1:2007 电气安全装置．第1部分：一般信息

Covers the planning, design, installation, operation and maintenance of electrical security installations.

Electrical security installations Part 1: General

IEC 64/1584/DTS:2007 IEC/TS 61201 版本2:常规接触电压限制的使用指南

IEC/TS 61201, Ed. 2: Guide for the use of conventional touch voltage limits

DIN EN 61140:2007 电击防护.装置和设备共同问题

Protection against electric shock - Common aspects for installation and equipment (IEC 61140:2001 + A1:2004, modified); German version EN 61140:2002 + A1:2006

IEC 64/1585/DTS:2007 IEC 60479-5 版本1:电流作用于人体和家畜的影响.第5部分:生理效应的接触电压界限值

IEC 60479-5, Ed. 1: Effects of current on human beings and livestock - Part 5: Touch voltage threshold values for physiological effects

NF C77-230:2007 信息技术设备.生产中的日常电气安全测试

Information technology equipment - Routine electrical safety testing in production.

NRS 040-6-2007 高压操作条例.第6部分:接地操作规程

Establishes and promotes the uniform use, understanding and implementation of the different types of medium-voltage and high-voltage earthing gear in power stations, substations, overhead lines, metal-clad switchgear, cables and mini-stations.

High-voltage operating instructions Part 6: Code of practice for earthing

UL GUIDE INFORMATION-2007 电气设备指南信息白皮书2007与2005国家电气标准相关的UL产品类别

Guide information for electrical equipment thewhite book 2007 ul product categories correlated to the 2005 national electrlcal

Guide information for electrical equipment thewhite book 2007 ul product categories correlated to the 2005 national electrlcal

ANSI/ISA 61010-031(82.02.02)-2007 测量、控制和实验室用电气设备安全要求.第031部分:电气测量和试验用手持探头组件安全要求

Applies to hand-held and hand-manipulated probe assemblies, and related accessories which are intended for professional, industrial process, and educational use. These probe assemblies are for use in the interface between an electrical phenomenon and test or measurement equipment. They may be fixed to the equipment or be detachable accessories for the equipment.

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

BS EN 60204-1:2006 机械安全性.机械用电气设备.一般要求

This part of IEC 60204 applies to the application of electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner. NOTE 1 This part of IEC 60204 is an application standard and is not intended to limit or inhibit technological advancement. NOTE 2 In this part of IEC 60204, the term electrical includes electrical, electronic and programmable electronic matters (i.e. electrical equipment means electrical, electronic and programmable electronic equipment). NOTE 3 In the context of this part of IEC 60204, the term person refers to any individual and includes those persons who are assigned and instructed by the user or his agent(s) in the use and care of the machine in question. The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1). NOTE 4 The requirements for the electrical supply installation in buildings are given in the IEC 60364 series. This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical equipment that operate with nominal supply voltages not exceeding 1 000 V for alternating current (a.c.) and not exceeding 1 500 V for direct current (d.c.), and with nominal supply frequencies not exceeding 200 Hz. NOTE 5 For higher voltages, see IEC 60204-11. This part of IEC 60204 does not cover all the requirements (for example guarding, interlocking, or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of machine has unique requirements to be accommodated to provide adequate safety. This part specifically includes, but is not limited to, the electrical equipment of machines as defined in 3.35. NOTE 6 Annex C lists examples of machines whose electrical equipment can be covered by this part of IEC 60204. ?This part of EN 60204 does not specify additional and special requirements that can apply to the electrical equipment of machines including those that – are intended for use in open air (i.e. outside buildings or other protective structures); – use, process, or produce potentially explosive material (for example paint or sawdust); – are intended for use in potentially explosive and/or flammable atmospheres; – have special risks when producing or using certain materials; – are intended for use in mines; – are sewing machines, units, and systems; NOTE 7 For sewing machines, see EN 60204-31. – are hoisting machines. NOTE 8 For hoisting machines, see EN 60204-32.? Power circuits where electrical energy is directly used as a working tool are excluded from this part of IEC 60204.

Safety of machinery - Electrical equipment of machines - General requirements

SANS 60479-1:2006 电流对人类及牲畜的影响.第1部分:一般方面

Provides basic guidance on the effects of shock current on human beings and livestock, for use in the establishment of electrical safety requirements in order to prevent death or injury.

Effects of current on human beings and livestock Part 1: General aspects

ARMY MIL-D-50030 H NOTICE 2-2006 DS2净化剂

This notice should be filed in front of MIL---D---50030H(EA),Amendment 1, dated 27 June 1996.

DECONTAMINATING AGENT, DS2

SANS 2220-1-8:2006 电气安全系统．第1．8部分：环境试验

Lays down certain environmental test methods to be used for testing components of a security system.

Electrical security systems Part 1-8: Environmental testing

KS C IEC 61032:2005 外壳对人体和设备的防护.检验用探头

이 규격은 다음과 같이 외곽(enclosure)으로 보호를 검증하는 시험 프로브의 세부 사

Protection of persons and equipment by enclosures－Probes for verification

KS C IEC 60621-3:2005 户外严酷条件下(包括露天矿和采石场)用电气设施.第3部分:设备和辅助设备的通用要求

서 문 이 규격은 1979년 제1판으로 발행된 IEC 60621-3 Electri

Electrical installations for outdoor sites under heavy conditions (including open-cast mines and quarries)-Part 3:General requirements for equipment and ancillaries

DL/T 974-2005 带电作业用工具库房

本标准规定了带电作业用工具库房的一般要求、技术条件与设施、测控装置及库房信息管理系统等。 本标准适用于贮存送、配、变带电作业用工具的库房，绝缘斗臂车车库也可参考使用。

Depot of tools for live-working