K09 卫生、安全、劳动保护 标准查询与下载

NRS 060-2005 额定电压不超过145 kV的电气系统的人身安全间隙实施规程

Covers safety clearances between live parts and objects for rated voltages up to and including 145 kV. The clearances stipulated in this code of practice provide a measure of safety to persons in the vicinity of live parts. Does not cover distances maint

Code of practice for clearances for electrical systems with rated voltages up to and including 145 kV, for the safety of persons

KS C IEC 61243-3:2005 带电作业.电压检测器.第3部分:两极低压型

이 규격은 공칭 주파수 500 Hz 이하의 공칭 전압 교류 1 kV, 직류 1.5 kV 이

Live working－Voltage detectors－Part 3：Two-pole low-voltage type

KS C IEC 61318:2005 带电作业.工具、器件和设备质量合格评定

이 규격은 전기 설비의 활선 작업에서 사용하는 기구 및 장치의 품질을 보증하기 위한 것으로

Live working－Guidelines for quality assurance plans

SANS 2220-2-6:2005 电气安全系统．第2．6部分：控制系统．出入卡

Specifies the characteristics of access cards intended to be used in access control systems.

Electrical security systems Part 2-6: Access control systems: Access cards

SANS 2220-2-7:2005 电气安全系统．第2．7部分：控制系统．屏障

Specifies the characteristics of barriers intended to be used in access control systems.

Electrical security systems Part 2.7: Access control systems: Barriers

SANS 60479-4:2005 电流对人类及牲畜的影响.第4部分:闪电对人类及牲畜的影响

Summarizes the basic parameters for lightning and their variability insofar as they apply to human beings and livestock. It indicates the possible direct and indirect interactions of strikes with bodies of living beings and describes the resulting effects caused by lightning currents. It is intended to show the differences between effects on human beings and livestock due to lightning strokes and those effects of electric shocks derived from electrical systems.

Effects of current on human beings and livestock Part 4: Effects of lightning strokes on human beings and livestock

SANS 2220-2-4:2005 电气安全系统．第2．4部分：控制系统．读卡机控制器

Specifies the characteristics of reader controllers intended to be used in access control systems.

Electrical security systems Part 2.4: Access control systems: Reader controllers

SANS 2220-2-5:2005 电气安全系统．第2．5部分：控制系统．生物识别器

Specifies the characteristics of biometric readers intended to be used in access control systems.

Electrical security systems Part 2-5: Access control systems: Biometric readers

SANS 2220-2-3:2005 电气安全系统．第2．3部分：控制系统．智能读卡机

Specifies the characteristics of card readers using the following technologies: wiegand: magnetic, infra-red: optic sensor, magnetic: magnetic sensor for magnetic spot cards or magnetic stripe cards, proximity: magnetic or radio frequency field se

Electrical security systems Part 2-3: Access control systems: Card readers

SANS 2220-2-2:2005 电气安全系统．第2．2部分：控制系统．中央处理器

Specifies the characteristics of central processors for use as part of access control systems.

Electrical security systems Part 2-2: Access control systems: Central processor

SANS 6160:2005 地板阻电

Specifies the test method for the determination of the electrical resistance of floors

Electrical resistance of floors

SANS 2220-2-1:2005 电气安全系统．第2．1部分：控制系统．一般特征

Specifies the general characteristics of access control systems.

Electrical security systems Part 2-1: Access control systems: General characteristics

ARMY MIL-D-51048 F VALID NOTICE 2-2004 M11 1至1/2夸脱 DS2便携式净化仪器

MIL-D-51048F remains inactive for new design, however, the document is valid for use.

DECONTAMINATING APPARATUS, PORTABLE, DS2, 1-1/2 QUART, M11

ARMY MIL-D-51091 J VALID NOTICE 2-2004 500加仑 M12A1式双层绝缘 多功能撬装电力驱动净化仪器

MIL-D-51091J remains inactive for new design, however, the document is valid for use.

DECONTAMINATING APPARATUS, POWER DRIVEN, SKID-MOUNTED, MULTIPURPOSE, NONINTEGRAL, 500 GALLON, M12A1

BS EN 61496-1:2004+A1:2008 机械安全.电敏感保护设备的一般要求和试验

This part of IEC 61496 specifies general requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety related system. Special attention is directed to functional and design requirements that ensure an appropriate safety-related performance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given in Annex A. The particular requirements for specific types of sensing function are given in other parts of this standard. This standard does not specify the dimensions or configuration of the detection zone and its disposition in relation to hazards in any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. While a data interface can be used to control optional safety-related ESPE functions (Annex A), this standard does not provide specific requirements. Requirements for these safety-related functions can be determined by consulting other standards (for example, IEC 61508, IEC/TS 62046, IEC 62061, and ISO13849-1). This standard may be relevant to applications other than those for the protection of persons, for example for the protection of machinery or products from mechanical damage. In those applications, different requirements can be necessary, for example when the materials that have to be recognized by the sensing function have different properties from those of persons. This standard does not deal with electromagnetic compatibility (EMC) emission requirements.

Safety of machinery - Electro-sensitive Protective equipment - Part 1: General requirements and tests

BS EN 61496-1:2004 机械安全.电敏保护设备.一般要求和试验

This part of IEC 61496 specifies general requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety related system. Special attention is directed to functional and design requirements that ensure an appropriate safety-related performance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given in Annex A. The particular requirements for specific types of sensing function are given in other parts of this standard. This standard does not specify the dimensions or configuration of the detection zone and its disposition in relation to hazards in any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. This standard may be relevant to applications other than those for the protection of persons, for example for the protection of machinery or products from mechanical damage. In those applications, different requirements can be necessary, for example when the materials that have to be recognized by the sensing function have different properties from those of persons. This standard does not deal with electromagnetic compatibility (EMC) emission requirements.

Safety of machinery - Electro-sensitive protective equipment - General requirements and tests

ARMY MIL-PRF-62048 C VALID NOTICE 1-2004 空干式(供内部内燃机)(十进制)重型汽车气净化器

MIL-PRF-62048C, dated 12 April 1996, has been reviewed and determined to be valid for use in acquisition

AIR CLEANERS, AUTOMOTIVE: HEAVY DUTY, DRY-TYPE (FOR INTERNAL COMBUSTION ENGINES) (METRIC)

ARMY MIL-DTL-62337 B VALID NOTICE 1-2004 空气净化器装配

MIL-DTL-62337B, dated 29 April 1999, has been reviewed and determined to be valid for use in acquisition

AIR CLEANER ASSEMBLY

ARMY MIL-DTL-51070 G CONT. DIST.-2003 M2A2空气净化器

This commercial item description covers brown kraft paper used for general wrapping applications.

PURIFIER, AIR, M2A2 [Use In Lieu Of: ARMY MIL-P-0051070 F REINST NOTICE 3 CONT. DIST.]

SANS 62151:2003 与通信网络电气化连接设备的安全

Is applicable to equipment designed and intended to be connected directly to a telecommunication netword, regardless of the source of power. Is intended for the enhancement of product safetey standards so as to cover hazards associated only with connection of equipment to a telecommunication network.

Safety of equipment electrically connected to a telecommunication network