K10 电工材料和通用零件综合 标准查询与下载

KS C 8452-2002 室内布线用接分(接)线盒(聚氯乙烯绝缘和护套电缆)

이 규격은 옥내의 주파수 60 Hz의 250 V의 전로에서 평형 비닐 절연 비닐 시스 케이

Junction box for indoor wiring(for polyvinyl－chloride insulated and sheathed cables：VVF)

KS C 8323-2002 室内布线用电线连接工具

이 규격은 주로 옥내 배선용 전선 커넥터 중 KS C 2620, KS C 2621에 사용하

Compression tools for wire connectors of interior wiring

JIS C 2111:2002 电绝缘纸、压制板和厚纸板的试验方法

この規格は，電気絶縁用の紙及ぴ板紙(以下,紙という。)の試験方法について規定する。板紙には，プレスボード及びプレスペーパーを含む。備考 この規格の対応国際規格を，次に示す。なお，対応の程度を表す記号は，ISO/IEC Guide 21に基づき，IDT(一致している)，MOD（修正している），NEQ(同等でない)とする。

Testing methods of electrical insulating papers, pressboard and presspaper

ANSI/NEMA WD6-2002 布线设备.尺寸要求

Covers dimensional requirements for plugs and receptacles rated up to 60 ampere and 600 volts. They also include dimensions for wallplates.

Wiring Devices - Dimensional Requirements

KS C IEC 62027:2001 附件目录的制作

이 규격은 부품 목록 작성법에 대하여 규정한다. 이 규격은 설계 공정 및 엔지니어링 공

Preparation of parts lists

IEC 61189-1:2001 互连结构和附件用电气材料的试验方法.第1部分:一般试验方法和方法论

This part of IEC 61189 is a catalogue of test methods representing methodologies and procedures that can be applied to test materials used for manufacturing interconnection structures (printed boards) and assemblies.

Test methods for electrical materials, interconnection structures and assemblies - Part 1: General test methods and methodology

IEC 61189-1:1997/AMD1:2001 电气材料、互连结构和组装的试验方法 第1部分:一般试验方法和分类 修改1

This is Amendment 1 to IEC 61189-1-1997 (TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - Part 1: General test methods and methodology)

Test methods for electrical materials, interconnection structures and assemblies - Part 1: General test methods and methodology; Amendment 1

IEC TR 62157:2001 经机械加工的圆拄形碳电极 标称尺寸

This technical report applies to cylindrical carbon electrodes, manufactured from upgraded coal, for use in electric direct-arc and submerged-arc furnaces, for melting silicium and carbide and for other purposes. This technical report covers - dimensions and tolerances on the length and diameter of carbon electrodes; - dimensions and thread details for carbon electrode heads and sockets.

Cylindrical machined carbon electrodes - Nominal dimensions

JB/T 10261-2001 额定电压450/750V及以下聚氯乙烯绝缘尼龙护套电线和电缆

　　本标准规定了额定电压450/750V及以下聚氯乙烯绝缘尼龙护套电线和电缆产品的型号、规格、技术要求、试验、验收规则、交货长度、标志和包装。 　　本标准适用于额定电压450/750V及以下动力装置固定布线用铜导体聚氯乙烯绝缘尼6龙护套电线和电缆。

Polyvinyl chloride insulated and nylon jacketed wires and cables with rated voltages up to and including 450/750V

AS/NZS 1660.2.1/AMD 1:2001 电缆、电线、导体的试验方法.第2.1部分:绝缘体、挤出型半导电屏蔽料和非金属管套.通用方法.修改件1

The 1998 edition of AS/NZS 1660.2.1 is amended as follows; the amendment should be inserted in the appropriate place

Test methods for electric cables, cords and conductors Method 2.1: Insulation, extruded semi-conductive screens and non-metallic sheaths— Methods for general application; Amendment No.1

UL 1660-2001 液体密封柔性非金属导(线)管

Liquid-tight flexible nonmetallic conduit

ASTM B682-01(2009) 电导体标准米制尺寸的标准规范

1.1 This specification covers and prescribes the recommended standard metric sizes of solid round electrical conductors. 1.2 This specification prescribes the recommended standard metric size designations of stranded electrical conductors (see Explanatory Note 1). Note 18212;Physical properties, construction requirements, and manufacturing tolerances for specific products should be included in individual product specifications developed in accordance with appropriate sizes in this specification. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3.1 Exceptions — For conductor sizes designated by AWG or kcmil, the requirements in SI units have been numerically converted from corresponding values, stated or derived, in inch-pound units. For conductor sizes designated by SI units only, the requirements are stated or derived in SI units. Rounded values appear in Table 1. TABLE 1 Standard Metric Diameters and Cross-Sectional Areas of Solid Round Wires at 20°C DiameterCross-Sectional Area mm (R 20 Series)in.A mm2 in.2AkcmilA 18.00.708 7254.50.394 4502.2 16.00.629 9201.10.311 6396.8 14.00.551 8153.90.238 6303.8 12.50.492 1122.70.190 2242.2 11.20.440 9 98.520.152 7194.4 10.00.393 7 78.540.121 7155.0 9.000.354 3 63.620.098 61125.6 8.00

Standard Specification for Standard Metric Sizes of Electrical Conductors

ASTM B682-01 电导体标准米制尺寸的标准规范

1.1 This specification prescribes the recommended standard metric sizes of solid round electrical conductors.1.2 This specification prescribes the recommended standard metric size designations of stranded electrical conductors (see Explanatory Note 1).Note 2--Physical properties, construction requirements, and manufacturing tolerances for specific products should be included in individual product specifications developed in accordance with appropriate sizes in this specification. 1.3 The values stated in inch-pound or SI units are to be regarded separately as standard. Each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. For conductor sizes designated by AWG or kcmil, the requirements in SI units have been numerically converted from corresponding values, stated or derived, in inch-pound units. For conductor sizes designated by SI units only, the requirements are stated or derived in SI units.

Standard Specification for Standard Metric Sizes of Electrical Conductors

DLA MS27638 REV D-2000 芯棒袖设定

The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83296.

MANDREL SLEEVE SETTING

HB 3-32-2000 电缆固定卡箍

Cable band

ASTM B542-00 电触点及其使用的相关标准术语

1.1 The terms included in this list are those that are peculiar to electric contacts or general terms that have a specific meaning when related to electric contacts. The definitions were prepared assuming that the reader has a general knowledge in a physical science but is unfamiliar with the terminology of the literature of electric contacts.

Standard Terminology Relating to Electrical Contacts and Their Use

KS C 0409-1999 ETD型铁酸盐

이 규격은 주로 전력 공급 장치에 사용하는 ETD형 페라이트 자심(이하 자심이라 한다.)의

Dimensions for magnetic oxide ETD core

KS C 6471-1999 软性印制电路板试验法

이 규격은 그 제조 방법에 관계없이 주로 전자 기기에 사용하는 단면 및 양면 플렉시블 프린

Test methods for flexible printed wiring boards

KS C 2518-1999 铁粉软磁性部件

이 규격은 분말 야금법으로 제조한 철계 연자성 재료(이하 재료라 한다.)에 대하여 규정한다

Soft magnetic iron parts fabricated by powder metallurgy techniques

KS C 2810-1999 室内布线用电线接头通则.不可分离型

이 규격은 600V 이하의 일반 옥내 배선 및 옥측 배선에서 동선 또는 알루미늄선(이하 알

General rules on non­separable type wire connectors for interior wiring