共找到 490 条与 电工材料和通用零件综合 相关的标准,共 33 页
WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN), THERMOCOUPLE EXTENSION, 200 DEGREES CTABLE 1 - KP Construction DetailsTABLE 1A - KP Construction Details, inch-pound UnitsTABLE 1B - KP Construction Details, SI UnitsTABLE 2 - KN CONSTRUCTION DETAILSTABLE 2A - KN CONSTRUCTION DETAILS, INCH-POUND UNITSTABLE 2B - KN Construction Details, SI Units
WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN), THERMOCOUPLE EXTENSION, 200 DEGREES C
WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, ABRASION RESISTANT, EXTRUDED PTFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION MEDIUM WEIGHT, 260 DEGREES CTABLE 1 - KP Construction DetailsTABLE 1A - KP Construction Details, inch-pound UnitsTABLE 1B - KP Construction Details, SI UnitsTABLE 2 - KN CONSTRUCTION DETAILSTABLE 2A - KN CONSTRUCTION DETAILS, INCH-POUND UNITSTABLE 2B - KN Construction Details, SI UnitsTABLE 3 - PERFORMANCE DETAILSTABLE 3A - PERFORMANCE DETAILS, INCH-POUND UNITSTABLE 3B - Performance Details, SI Units
WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, ABRASION RESISTANT, EXTRUDED PTFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION MEDIUM WEIGHT, 260 DEGREES C
WIRE, THERMOCOUPLE, CROSSLINKED POLYALENE INSULATED NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 150 DEGREES CTABLE 1 - KP Construction DetailsTABLE 1A - KP Construction Details, inch-pound UnitsTABLE 1B - KP Construction Details, SI UnitsTABLE 2 - KN CONSTRUCTION DETAILSTABLE 2A - KN CONSTRUCTION DETAILS, INCH-POUND UNITSTABLE 2B - KN Construction Details, SI UnitsTABLE 3 - PERFORMANCE DETAILSTABLE 3A - PERFORMANCE DETAILS, INCH-POUND UNITSTABLE 3B - Performance Details, SI Units
WIRE, THERMOCOUPLE, CROSSLINKED POLYALENE INSULATED NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 150 DEGREES C
WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 DEGREES CTABLE 1 - KP Construction DetailsTABLE 1A - KP Construction Details, inch-pound UnitsTABLE 1B - KP Construction Details, SI UnitsTABLE 2 - KN CONSTRUCTION DETAILSTABLE 2A - KN CONSTRUCTION DETAILS, INCH-POUND UNITSTABLE 2B - KN Construction Details, SI UnitsTABLE 3 - Wire Insulation Materials1TABLE 4 - Physical Properties of FP/Polyimide/FP TapeTABLE 5 - Tape Overlap Requirements1
WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 DEGREES C
WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREES CTABLE 1 - KP Constructioin DetailsTABLE 1A - KP Construction Details, inch-pound UnitsTABLE 1B - KP Contruction Details, SI UnitsTABLE 2 - KN CONSTRUCTION DETAILSTABLE 2A - KN CONSTRUCTION DETAILS, INCH-POUND UNITSTABLE 2B - KN Construction Details, SI Units
WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREES C
WIRE, THERMOCOUPLE, FP/POLYMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 DEGREES CTABLE 1 - KP Construction DetailsTABLE 1A - KP Construction Details, inch-pound UnitsTABLE 1B - KP Construction Details, SI UnitsTABLE 2 - KN CONSTRUCTION DETAILSTABLE 2A - KN CONSTRUCTION DETAILS, INCH-POUND UNITSTABLE 2B - KN Construction Details, SI UnitsTABLE 3 - Wire Insulation Materials1TABLE 4 - Physical Properties of FP/Polyimide/FP TapeTABLE 5 - Tape Overlap Requirements1
WIRE, THERMOCOUPLE, FP/POLYMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 DEGREES C
이 규격은 주파수 제어 및 선택용 표면 실장 소자(SMD)의 모든 개략도의 기계 호환성
Piezoelectric devices-Preparation of outline drawings of surface-mounted devices(SMD) for frequency control and selection-General rules
이 규격은 전화선로를 옥내에 배선하는 데 사용하는, 염화비닐로 피복된 2심 8자형 PVC
PVC indoor telephone wires
이 규격은 국내 배선용으로 음성 주파 전류 전송에 사용되는 염화비닐 수지를 주체로 한 혼합
L.F Cables and wires with P.V.C insulation and P.V.C sheath for telephone
The objective of this Test Procedure is to establish a set of tests and analysis that will validate key aspects of Powerline Carrier Technology (PLT) for use in Home Networking products. Specifically, tests and analysis will be conducted to evaluate the following: a) outlet coverage - using a minimum of 30 outlet pairs per test site, one pair at a time. b) application performance - using a minimum of 3 typical scenarios c) network coexistence performance - with networks operating simultaneously in neighboring residences d) performance over a range of network sizes - using node populations of 3, 5, 10, 14 in the field e) performance across a range of dwelling types and geographic areas - using a minimum of 30 homes, from a variety of geographic locations, building types, construction, and wiring methods. There are three components to the tests: a) First, the initial pre-field lab verification tests of §8.1 to ensure that the technology can successfully complete the suite of field tests described below b) Second, the actual home testing (field tests) of §7 c) Third, the post-field lab tests of §8.2 - §8.8 for those aspects of the technology that can be more easily exercised in a lab Field testing in the actual homes also consists of initial preparatory activities in each home: a) home inventory (sketch home layout, select and number outlets, note special home characteristics, etc.) b) equipment set up and check out Home profiling measurements (powerline characterization) may be taken either before or after the testing is complete in a given home, but home profiling is separate from these Test Procedures. The Powerline Carrier Network (PLN) set will be pre-configured for 14 nodes using 14 dedicated personal computers (PC’s). Once configured, the PC/PLN set will move from home to home.
Test Procedure for Powerline Carrier Technology -Best Available Copy
이 규격은 드라이 마이카 및 프리프레그 마이카를 제외한 상온에서 유연성이 있는 마이카 제품
Flexible mica materials
이 규격은 전기 기기의 저항으로 사용되는 산화 피막을 갖는 동ㆍ니켈 저항선(이하 저항선이라
Oxidized copper-nickel resistance wires
이 규격은 옥내용 벽 또는 천장에 매입, 부착 또는 현수 조명 기구의 트랙 시스템에 적용한
Lighting busways
이 규격은 600 V 이하의 주로 가공 인입선에 사용하는 염화비닐 수지를 주체로 한 콤파운
Polyvinyl chloride insulated drop service wires
This notice should be filed in front of MIL-T-55156, dated 16 January 1962.
TERMINALS, LUG; SPLICES, CONDUCTOR; SCREW TYPE, GENERAL SPECIFICATION FOR
이 규격은 실리콘 단결정(이하 단결정이라 한다.) 및 실리콘 웨이퍼(이하 웨이퍼라 한다
Testing method of resistivity for silicon crystals and silicon wafers with four - point probe
이 규격은 주로 전기 통신 기기, 전자 기기 및 전력 기기에 사용하는 전력형 권선 가변 저
Power type coated wire wound variable resistors
이 규격은 전자 기기에 사용되는 일반용 탄소계 가변 저항기(이하 저항기라 한다.)에 대하
Carbon potentiometers for general use
이 규격은 KS C 5111에 근거하여 주로 전자 기기에 사용하는 전력형 고정 권선 저항기
Fixed wire wound resistors-Power type
이 규격은 주로 전기 통신 기기 및 전자 기기에 사용하는 권선형 가변 저항기(이하 저항기라
Wirewound potentiometers
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号