K14 电工合金零件 标准查询与下载

ANSI/EIA 772:2001 熔断器的用户应用指南

Aids the circuit and system designer in the selection of supplemental fuses.

Users Application Guide to Fuses

JB/T 10102-2001 磁性材料 分类

　　本标准适用于对大批量生产的磁性材料进行分类。 　　“磁性材料”这个术语，表示应用中要求具有铁磁性或亚铁磁性的物质。 　　本标准中，磁性材料的分类以公认的主要两类产品为基础： 　　——软磁材料(矫顽力≤1000A/m)； 　　——永(硬)磁材料(矫顽力>1000A/m)。 　　在这些主要类别中，当分类合理时可话别出如下一些特性： 　　——材料的主要合金元素、冶金状态和物理性能； 　　——在可能和方便时，可辨认出这些特性间的相互关系。 　　按特殊应用领域的分类不适用于所有的材料，因为根据其要求的特性，不同的材料常可用于相同的用途。

Magnetic materials:Classification

ANSI/ASTM B563:2001 钯银铜电触点合金规范

This specification covers an alloy containing palladium, silver, copper, platinum, and nickel in the form of wire, rod, and strip for electrical contacts. The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only. The following precautionary statement pertains to the test method portion only, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Specification for Palladium-Silver-Copper Electrical Contact Alloy

ANSI/ASTM B603:2001 电加热元件的拉伸或辊轧铁铬铝合金规范

This specification covers annealed, drawn, or rolled shapes for electrical heating and resistance purposes of alloys consisting mainly of iron, chromium, and aluminum as detailed in . The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements

ASTM B344-01 电加热元件用拉制或轧制镍铬及镍铬铁合金标准规范

1.1 This specification covers annealed, drawn, or rolled shapes for electrical heating purposes, of alloys having the nominal compositions of 80 % nickel and 20 % chromium; 60 % nickel, 16 % chromium, and remainder iron; and 35 % nickel, 20 % chromium, and remainder iron.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements

ANSI/ASTM B683:2001 纯钯电触点材料规范

This specification covers palladium in the form of rod, wire, strip, and sheet material for electrical contacts. The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Specification for Pure Palladium Electrical Contact Material

ANSI/ASTM B685:2001 钯铜电触点材料规范

This specification covers a 60 % palladium-40 % copper alloy in the form of rod, wire, strip, and sheet material for electrical contacts. The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Specification for Palladium-Copper Electrical Contact Material

ANSI/ASTM B76:2001 电加热用镍铬和镍铬铁合金加速寿命试验方法

This test method covers the determination of the resistance to oxidation of nickel-chromium and nickel-chromium-iron electrical heating alloys at elevated temperatures under intermittent heating. Procedures for a constant-temperature cycle are provided. This test method is used for internal comparative purposes only. The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating

ANSI/ASTM B753:2001 恒温组份合金规范

This specification describes requirements for alloys to be used as components in the manufacture of bonded multi-component thermostat metal strip. More specifically it describes alloys having composition, and thermal expansion suitable for application in thermostat metal sheet and strip.

Specification for Thermostat Component Alloys

ANSI/ASTM B78:2001 铁镍铝合金电加热加速寿命试验方法

This test method covers the determination of the resistance to oxidation of iron-chromium-aluminum electrical heating alloys at elevated temperatures under intermittent heating using a constant-temperature cycle test. This test is used for internal comparative purposes only. The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating

ANSI/ASTM B84:2001 精密电阻器合金电阻丝耐温常数测试方法

This test method covers determination of the change of resistance with temperature of alloy wires used for resistance standards and precision resistors for electrical apparatus. The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors

ANSI/ASTM B114:2001 精密电阻器和分路器片材耐温常数测试方法

This test method covers the determination of the change of resistance with temperature of sheet materials used for shunts and precision resistors for electrical apparatus. It is applicable to materials normally used in the temperature range of from 0 to 80?C. The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors

ANSI/ASTM B522:2001 金银铂电触点合金规范

This specification covers 69 % gold, 25 % silver, 6 % platinum alloy tubing, rod, wire, and sheet material for sliding electrical contacts. The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Specification for Gold-Silver-Platinum Electrical Contact Alloy

ANSI/ASTM B541:2001 金电触点合金规范

This specification covers a gold-rich, age-hardenable alloy in rod, wire, and strip form applicable to electrical contacts. The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. The following precautionary statement pertains to the test method portion only, Section , of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Specification for Gold Electrical Contact Alloy

ANSI/ASTM B77:2001 电阻合金的热电动力试验方法

This test method covers the determination of the thermoelectric power of a metal or alloy with respect to copper when the temperatures of the junctions lie between 0 and 100C. The values stated in inch-pound units are the preferred unit. The values in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Test Method for Thermoelectric Power of Electrical-Resistance Alloys

JIS C 2504:2000 软磁铁

この規格は，りレー，電磁石，磁気クラッチ，プレーキ，発電機，モータなどの鉄心，継鉄，接極子，その他磁気シールドに用いる電磁軟鉄棒(以下,棒という.)，ロッド(以下,ロッドという。)，線(以下,線という。)，板(以下,板という。)及び条(以下,条という。)の一般事項，特性，形状及びその試験方法について規定する。

Soft magnetic irons

ASTM A1013-00(2013)e1 用伏特计、安培计和瓦特计测定可控温度下软磁芯部件的高频(10 kHz-1 MHz)磁芯损耗的标准试验方法

4.1 This test method is designed for testing of either toroidal or mated soft magnetic core components over a range of temperatures, frequencies, and flux densities. 4.2 The reproducibility and repeatability of this test method are such that it is suitable for design, specification acceptance, service evaluation, and research and development. 1.1 This test method covers the equipment, procedures, and measurement of core loss of either toroidal or mated soft magnetic core components, such as soft ferrite cores, iron powder cores, and so forth, over ranges of controlled ambient temperatures typically from −20 to +120°C, frequencies from 10 kHz to 1 MHz, under sinusoidal flux conditions. 1.2 The values and equations stated in customary (cgs-emu and inch-pound) or SI units are to be regarded separately as standard. Within this test method, SI units are shown in brackets except for the sections concerning calculations where there are separate sections for the respective unit systems. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method

JIS C 2532:1999 一般用途电阻丝、带和薄板

この規格は，体積祇抗率が1.5μΩ・m以下の電気抵抗用合金線，条及ぴ板（以下,線，条及ぴ板という。)について規定する。

Electrical resistance wires, ribbons and sheets for general use

JIS C 2522:1999 电阻用铜锰合金丝、棒和薄板

この規格は，銅，マンガン及びニッケルを主成分とする合金で,電気抵抗の温度係数(以下.温度係数という。)及び銅に対する熱起電力が小さい電気抵抗用銅マンガンの線，棒及ぴ板く以下.線，棒及び板という。)について規定する。

Copper-manganese alloy wires, bars and sheets for electrical resistance

JIS C 2521:1999 电阻用铜镍合金丝,轧制丝、带和薄板

この規格は，銅及びニッケルを主成分とする合金で，電気祇抗温度係数(以下,温度係数という。)が小さい電気抵抗用銅ニッケル線，帯，条及び板(以下,線，帯，条乃び板という.)について規定する。

Copper-nickel alloy wires, rolled wires, ribbons and sheets for electrical resistance