共找到 104 条与 电碳制品 相关的标准,共 7 页
JB/T 8133的本部分规定了电炭制品硫含量的试验方法、本部分适用于电炭制品中硫含量的测定、
Test method for physical-chemical properties of electrical carbon product.Part 16:Sulphur content
JB/T 8133的本部分规定了电炭制品的抗折强度试验方法、本部分适用于电炭制品抗折强度试验、
Test method for physical-chemical properties of electrical carbon product.Part 7:Transverse strength
JB/T 8133的本部分规定了电炭制品肖氏硬度试验方法、本部分适用于电刷及其他炭石墨制品的肖氏硬度试验、
Test method for physical-chemical properties of electrical carbon product.Part 4:Shore hardness
JB/T 8133的本部分规定了电刷刷体与软接线联接处的联接电阻试验方法、本部分适用于电刷刷体(简称刷体)与软接线联接处的联接电阻试验、
Test method for physical-chemical properties of electrical carbon product.Part 5:Connection electrical resistance of brush/flexible connection
JB/T 8133的本部分规定了电炭制品抗拉强度试验方法、本部分适用于试样颗粒度小于0.79 mm的电炭制品的抗拉强度试验、
Test method for physical-chemical properties of electrical carbon product.Part 9:Tensile strength
JB/T 8133的本部分规定了电炭制品抗压强度试验方法、本部分适用于电炭制品的抗压强度试验、
Test method for physical-chemical properties of electrical carbon product.Part 8:Compressive strength
JB/T 8133的本部分规定了电刷软接线的脱出拉力试验方法、本部分适用于填塞法或模压法固定软接线电刷的脱出拉力试验、
Test method for physical-chemical properties of electrical carbon product.Part 6:Pull strength of brush connection
JB/T 8133的本部分规定了电炭制品电阻率的试验方法、本部分适用于电炭制品电阻率的测定、
Test method for physical-chemical properties of electrical carbon product.Part 2:Resistivity
JB/T 8133的本部分规定了电炭制品体积密度试验方法、本部分适用于电炭制品体积密度的测定、
Test method for physical-chemical properties of electrical carbon product.Part 14:Volume density
JB/T 8133的本部分规定了炭柱机械强度试验方法、本部分适用于P型炭柱机械强度试验、
Test method for physical-chemical properties of electrical carbon product.Part 13:Mechanical strength of carbon plie
JB/T 8133的本部分规定了电炭制品洛氏硬度试验方法、本部分适用于电炭制品物理化学性能试验、
Test method for physical-chemical properties of electrical carbon product.Part 3:Rockwell hardness
JB/T 8133的本部分规定了炭和石墨材料及制品灰分含量试验方法、本部分适用于炭和石墨材料及其制品(不含金属及硼组分)灰分含量的测定
Test method for physical-chemical properties of electrical carbon product.Part 17:Ash content
JB/T 8133的本部分规定了电炭制品试样加工技术要求、本部分适用于电炭制品试验用试样的加工、
Test method for physical-chemical properties of electrical carbon product.Part 1:Technical instruction of machining sample
本标准规定了用X射线粉末衍射法(衍射仪法)测定人造石墨的点阵参数的原理、内标准物质、仪器、试样制备、试验条件、试验步骤、试验结果的处理和计算以及试验报告的内容。 本标准适用于经过高温热处理的石墨化度高的人造石墨(如人造金钢石用石墨等)。
Determination method of artificial graphite lattice parameter
本标准规定了金属石墨制品电阻率的原理、试验仪器设备、试样、试验条件、试验步骤和结果计算。 本标准适用于银石墨电刷、铜石墨电刷及其他金属石墨制品电阻率的测定。
Resis tivity laboratory method of metal graphite products
이 표준은 탄소 압연 페이스트를 다져서 만든 녹색 시험 시편을 굽는 방법에 관한 것이다.
Carbonaceous materials used in the production of aluminium-Cold and tepid ramming pastes-Preparation of baked test pieces and determination of loss on baking
이 표준은 탄소 압연 페이스트를 다져서 만든 굽지 않은 시편을 준비하는 방법에 관한 것이다
Carbonaceous materials used in the production of aluminium-Cold and tepid ramming pastes-Preparation of unbaked test specimens and determination of apparent density after compaction
이 표준은 알루미늄 제조용 환원 음극을 배열하는 데 사용되는, 탄소 압연 페이스트의 압연성
Carbonaceous materials used in the production of aluminium-Cold and tepid ramming pastes-Determination of rammability of unbaked pastes
이 방법은 알루미늄 제조용 환원 음극 블록 재료를 가압하에서 나트륨 침투에 의한 선형 팽창
Carbonaceous materials for the production of aluminium-Cathode block materials-Part 1:Determination of the expansion due to sodium penetration with application of pressure
이 방법은 알루미늄 제조용 환원 음극 블록 재료의 나트륨 침투에 의한 선형 팽창의 측정에
Carbonaceous materials for the production of aluminium-Cathode block materials-Part 2:Determination of the expansion due to sodium penetration without application of pressure
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号