K43 高压开关设备 标准查询与下载
共找到 829 条与 高压开关设备 相关的标准，共 56 页
本标准适用于电力变压器用的有载分接开关及其电动机构。它主要适用于浸在符合GB2536-81的变压器油中的分接开关，但在条件很合适的情况下，也可用于气体绝缘的分接开关。 注：本标准认为合成的绝缘液体也是一种油。只有在分接开关的设计与合成绝缘液体相容时，分接开关才能使用合成绝缘液体。
On-load tap-changers
- ICS
- 29.120.40
- CCS
- K43
- 发布
- 1988-12-22
- 实施
- 1990-01-01
本标准适用于10～63kV、50Hz的交流高压断路器在正常条件下开合电容器组的试验（其他开关设备可参考采用）。
The capacitor banks switching tests for A.C. high-voltage circuit-breaker
- ICS
- 31.060.60
- CCS
- K43
- 发布
- 1987-04-16
- 实施
- 1988-01-01
Terminals for transformers,high-voltage apparatus and bushings
- ICS
- 29.080.20
- CCS
- K43
- 发布
- 1985-08-01
- 实施
- 1986-04-01
本标准适用于额定电压110kV以上50Hz交流高压断路器（其他开关电器可参考采用），在正常条件和接地故障条件下，线路充电电流开合试验。本标准亦适用于串有一段短电缆的架空线充电电流开合试验。
Line-charging current switching tests for a.c. high voltage circuit-breaker
- ICS
- 29.120.60
- CCS
- K43
- 发布
- 1985-01-28
- 实施
- 1985-10-01
本文件规定了混合式高压直流断路器的设备交接试验、分系统试验的试验项目、方法和要求等。 本文件适用于100~500kV高压直流输电系统用混合式高压直流断路器，其他电压等级可以参照执行。
Specifications for field testing of hybrid high-voltage DC circuit breakers
- ICS
- 29.120.40
- CCS
- K43
- 发布
- 2023-10-11
- 实施
- 2024-04-11
本文件规定了直流转换开关振荡特性现场试验的试验原理、试验条件、仪器设备、试验步骤、试验数据处理和试验报告等要求。 本文件适用于高压直流输电系统用金属回线转换开关、大地回线转换开关、中性母线开关和中性母线接地开关等直流转换开关的振荡特性现场试验。
Field test method for oscillation characteristics of DC transfer switch
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2023-05-26
- 实施
- 2023-11-26
本文件给出了10kV～20kV架空配电线路旁路作业用旁路负荷开关、带电作业用消弧开关和带电作业用隔离开关的使用环境条件，描述了三种开关的结构和电气性能、机械性能，规定了三种开关的技术要求、试验方法和检验规则等。 本文件适用于海拔3000 m及以下地区10kV～20kV架空配电线路旁路作业用旁路负荷开关、带电作业用消弧开关和带电作业用隔离开关。
Distribution line bypass operation tools and equipment Part 2: Bypass switch
- ICS
- 29.240.20
- CCS
- K43
- 发布
- 2023-05-26
- 实施
- 2023-11-26
High-voltage switchgear and controlgear. Synthetic testing
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2021-10-04
- 实施
- 2021-10-04
High-voltage switchgear and controlgear. Alternating current high-speed earthing switches for secondary arc extinction on transmission lines
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2021-09-13
- 实施
- 2021-09-13
High-voltage switchgear and controlgear. Alternating current circuit-breakers
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2021-09-07
- 实施
- 2021-09-07
High-voltage switchgear and controlgear. AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2021-08-05
- 实施
- 2021-08-05
High-voltage switchgear and controlgear - Part 200 : AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
- ICS
- 29.080.99
- CCS
- K43
- 发布
- 2021-07-30
- 实施
- 2021-10-08
A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2021-07-20
- 实施
High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2021-06-11
- 实施
- 2021-06-11
The purpose of this document is to define homogeneous categories for the electromagnetic environments in order to harmonize as far as practicable all general rules and product standard requirements of electromagnetic compatibility (EMC), applicable to low-voltage switchgear, cont
Low-voltage switchgear and controlgear - Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies (IEC/TR 63216:2019); German version CLC IEC/TR 63216:2020
- ICS
- 29.130.20
- CCS
- K43
- 发布
- 2021-06-00
- 实施
- 2021-06-01
Technical Specifications for DC Circuit Breakers for Offshore Wind Farm DC Integration into Power Systems
- ICS
- ICS 29.120.40
- CCS
- K43
- 发布
- 2021-04-26
- 实施
- 2021-10-26
Testing Switchgear Rated up to 52 kV for Internal Arcing Faults Corrigendum 1
- ICS
- 29.130
- CCS
- K43
- 发布
- 2021-03-25
- 实施
This International Standard is applicable to mechanical switching devices designed as \
Circuit breakers for equipment (CBE) (IEC 60934:2019); German version EN IEC 60934:2019
- ICS
- 29.120.40
- CCS
- K43
- 发布
- 2020-11-01
- 实施
- 2020-11-01
Hybrid high voltage DC circuit breaker
- ICS
- ICS 29.120.40
- CCS
- K43
- 发布
- 2020-10-23
- 实施
- 2021-02-01
Specifications for electrical safety testing and inspection of high-voltage switchgear in use in metal and non-metal mines
- ICS
- 29.240.30
- CCS
- K43
- 发布
- 2019-08-12
- 实施
- 2020-02-01
