K46 电力半导体器件、部件 标准查询与下载
共找到 413 条与 电力半导体器件、部件 相关的标准，共 28 页
本标准规定了海上永磁风力发电机变流器(以下简称变流器)的术语和定义、技术要求、试验方法、检验规则及其产品的相关信息等。本标准适用于安装在海上风电场连接永磁风力发电机定子绕组的电压源型变流器。
Converter of offshore permanent magnet wind turbine generator
- ICS
- 29.120.01
- CCS
- K46
- 发布
- 2012-10-29
- 实施
- 2013-03-01
This part of IEC 62477 applies to Power Electronic Converter Systems (PECS) and equipment@ their components for electronic power conversion and electronic power switching@ including the means for their control@ protection@ monitoring and measurement@ such as with the main purpose of converting electric power@ with rated system voltages not exceeding 1 000 V a.c. or 1 500 V d.c. This document may also be used as a reference standard for product committees producing product standards for: adjustable speed electric power drive systems (PDS); standalone uninterruptible power systems (UPS); low voltage stabilized d.c. power supplies. For PECS for which no product standard exists@ this standard provides minimum requirements for safety aspects. This part of IEC 62477 has the status of a group safety publication in accordance with IEC Guide 104 for power electronic converter systems and equipment for solar@ wind@ tidal@ wave@ fuel cell or similar energy sources. According to IEC Guide 104@ one of the responsibilities of technical committees is@ wherever applicable@ to make use of basic safety publications and/or group safety publications in the preparation of their product standards. This International Standard: establishes a common terminology for safety aspects relating to PECS and equipment; establishes minimum requirements for the coordination of safety aspects of interrelated parts within a PECS; establishes a common basis for minimum safety requirements for the PEC portion of products that contain PEC; specifies requirements to reduce risks of fire@ electric shock@ thermal@ energy and mechanical hazards@ during use and operation and@ where specifically stated@ during service and maintenance; specifies minimum requirements to reduce risks with respect to pluggable and permanently connected equipment@ whether it consists of a system of interconnected units or independent units@ subject to installing@ operating and maintaining the equipment in the manner prescribed by the manufacturer. This International Standard does not cover: telecommunications apparatus other than power supplies to such apparatus; functional safety aspects as covered by e.g. IEC 61508; electrical equipment and systems for railways applications and electric vehicles.
Safety requirements for power electronic converter systems and equipment - Part 1: General
- ICS
- 29.200;31.080.99
- CCS
- K46
- 发布
- 2012-07
- 实施
- 2012-07-26
Terminal markings for valve device stacks and assemblies and for power conversion equipment (IEC 61148:2011); German version EN 61148:2012
- ICS
- 29.200
- CCS
- K46
- 发布
- 2012-04-01
- 实施
本标准规定了低压有源电力滤波装置（以下称滤波装置）的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输、贮存等要求。 本标准适用于50Hz、额定工作电压不超过1000V的低压配电系统，采用三相三线电压源型逆变器结构的并联型滤波装置。
Low-voltage active power filter (APF)
- ICS
- 29.200
- CCS
- K46
- 发布
- 2011-12-20
- 实施
- 2012-04-01
Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters.
- ICS
- 29.200
- CCS
- K46
- 发布
- 2011-09-01
- 实施
- 2011-09-30
本标准规定了永磁风力发电机变流器（以下简称“变流器”）的术语和定义、技术要求、试验方法、检验规则及其产品的相关信息等。 本标准适用于连接永磁风力发电机定子绕组的电压源型变流器。
Manufactured technical specification for converter of permanent magnet wind turbine generator
- ICS
- 29.120.01
- CCS
- K46
- 发布
- 2011-08-06
- 实施
- 2011-11-01
本标准规定了双馈风力发电机变流器（以下简称“变流器”）的术语和定义、技术要求、试验方法、检验规则及其产品的相关信息等。 本标准适用于连接双馈风力发电机转子绕组的电压源型变流器。
Manufacturing technical specification for converter of double-fed wind turbine generator
- ICS
- 29.120.01
- CCS
- K46
- 发布
- 2011-08-06
- 实施
- 2011-11-01
High-voltage direct current (HVDC) installations - System tests (IEC 61975:2010); German version EN 61975:2010
- ICS
- 31.080.20
- CCS
- K46
- 发布
- 2011-04
- 实施
- 2011-04-01
This amendment has been prepared by subcommittee 22F: Power electronics for electrical transmission and distribution systems, of IEC technical committee 22: Power electronic systems and equipment.
Determination of power losses in high-voltage direct current (HVDC) converter stations with line commutated converters
- ICS
- 29.200
- CCS
- K46
- 发布
- 2010-11
- 实施
- 2010-11
This International Standard specifies the requirements for the performance of all semiconductor power converters and semiconductor power switches using controllable and/or non-controllable electronic valve devices. The electronic valve devices mainly comprise semiconductor devices, either not controllable (i.e. rectifier diodes) or controllable (i.e. thyristors, triacs, turn-off thyristors and power transistors). The controllable devices may be reverse blocking or reverse conducting and controlled by means of current, voltage or light. Non-bistable devices are assumed to be operated in the switched mode. This standard is primarily intended to specify the basic requirements for converters in general and the requirements applicable to line commutated converters for conversion of a.c. power to d.c. power or vice versa. Parts of this standard are also applicable to other types of electronic power converter provided that they do not have their own product standards. These specific equipment requirements are applicable to semiconductor power converters that either implement power conversion or use commutation (for example semiconductor selfcommutated converters) or involve particular applications (for example semiconductor converters for d.c. motor drives) or include a combination of said characteristics (for example direct d.c. converters for electric rolling stock). This standard is applicable to all power converters not covered by a dedicated product standard, or if special features are not covered by the dedicated product standard. Dedicated product standards for power converters should refer to this International Standard. NOTE 1 This standard is not intended to define EMC requirements. It covers all phenomena and therefore introduces references to dedicated standards which are applicable according to their scope. NOTE 2 A large part of this standard, particularly for power transformers, is covered in IEC 61378-1.
Semiconductor converters. General requirements and line commutated converters. Part 1-1: Specification of basic requirements
- ICS
- 29.045;29.200
- CCS
- K46
- 发布
- 2010-08-31
- 实施
- 2010-08-31
本标准规定了低压晶闸管投切滤波装置的使用条件、技术要求、试验类别、试验项目、试验条件、试验方法、标志、包装、运输与储存等。 本标准适用于交流频率50Hz、标称电压1kV以下的供配电系统中，用晶闸管或复合开关投切的滤波装置。
Technical specification for thyristor switched low voltage filter
- ICS
- 29.240.01
- CCS
- K46
- 发布
- 2010-05-24
- 实施
- 2010-10-01
This Standard specifies the thyristor rectifiers for floating charge of batteries specified in JIS C 8702-1, JIS C 8702-2, JIS C 8702-3, JIS C 8704-1, JIS C 8704-2-1, JIS C 8704-2-2 and JIS C 8706, of which the nominal d.c. voltage is 200 V or less and the rated d.c. current is 600 A or less. Rectifiers used for communication equipment are excluded.
Thyristor rectifiers for floating charge
- ICS
- 29.200
- CCS
- K46
- 发布
- 2010-05-20
- 实施
本标准规定了晶闸管交流电力控制器的术语和定义、型式、基本参数、性能和试验以及标志、包装、运输和贮存要求。 本标准适用于以晶闸管为主控器件对交流电力进行开关或控制的工业用低压交流电力控制器，包括对交流电力进行开关、周波数控制和相位控制，但不包括交流-交流变频器。其应用范围包括工业炉温度控制、电动机起动器、固态继电器、交流调光器及其他控制交流电力输出的场合。 以其他电力半导体器件(例如IGBT等)为主控器件的交流电力控制器，本标准亦可参照使用。
Thyristor a.c. power controllers
- ICS
- 29.200
- CCS
- K46
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了电力工程直流系统用整流设备的术语和定义、基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存等内容。 本标准适用于电力工程直流系统用整流设备。该系统中的其他设备如直流配电装置、蓄电池(组)等、应符合相关标准的规定。 本标准未涉及到的半导体变流器的共性要求，应遵照GB/T 3859的规定。
Rectifier equipment for DC system in electric power engineering
- ICS
- 29.200
- CCS
- K46
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了工业电池用充电设备的术语、定义、基本参数、技术要求、检验和试验、标志、包装、运输和贮存等内容。 本标准适用于直流功率1kW以上、直流电压等级1000V以下，被 充电电池可以是铅酸蓄电池，也可以是锂电池或者其他具有相同特性的蓄电池，为电动搬运车、电动汽车、蓄电池化成和类似设备提供动力的电池充电的设备。 电力工程及邮电、通信用电池的充电、浮充电用整流设备也可参照使用。 本标准不适用于码头、船坞和其他海上用途的电池充电，家用电器和应急照明用电池充电，也不适用于消防泵和消防车的电池充电。本标准中的快速充电设备不适用于铅酸贫液蓄电池的充电。
Charging equipment for industrial batteries
- ICS
- 29.200
- CCS
- K46
- 发布
- 2010-02-11
- 实施
- 2010-07-01
Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter applications
- ICS
- 29.200
- CCS
- K46
- 发布
- 2010-01-31
- 实施
- 2010-01-31
This standard applies to the avalanche breakdown diodes used for surge protection on systems with voltages equal to or less than 1000 V rms or 1200 V dc. The avalanche breakdown diode surge suppressor is a semiconductor diode which can operate in either the forward or reverse direction of its V-I characteristic. This component is a single package, which may be assembled from any combination of series and/or parallel diode chips.
Standard Test Methods for Avalanche Junction Semiconductor Surge-Protective Device Components
- ICS
- 29.120.50
- CCS
- K46
- 发布
- 2010
- 实施
Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter applications
- ICS
- 29.200
- CCS
- K46
- 发布
- 2009-11
- 实施
Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 3: Dynamic conditions
- ICS
- CCS
- K46
- 发布
- 2009-10
- 实施
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:1998 + A1:2003 + A2:2008); German version EN 60700-1:1998 + A1:2003 + A2:2008
- ICS
- 31.080.20
- CCS
- K46
- 发布
- 2009-07
- 实施
- 2009-07-01
