K47 输电线路器材 标准查询与下载

DL/T 696-1999 软母线固定金具

Cable support

DL/T 683-1999 电力金具产品型号命名方法

Nomenclature for fittlags model

ASTM F1826-00(2006) 带电作业和测量用伸缩式工具的标准规范

1.1 This specification covers mechanical and electrical testing and acceptance criteria for telescoping live line tools.1.1.1 A tool designed only for use as a measuring device need not comply with mechanical strength requirements of this specification.1.2 The use and maintenance of this equipment is beyond the scope of this specification.1.3 This specification does not cover multiple section or extendable section clampsticks.1.4 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only.The following safety hazards caveat pertains to Section 9 only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Live Line and Measuring Telescoping Tools

ASTM F1826-00(2011) 带电线路和测量套管式工具的标准规范

1.1 This specification covers mechanical and electrical testing and acceptance criteria for telescoping live line tools.1.1.1 A tool designed only for use as a measuring device need not comply with mechanical strength requirements of this specification.1.2 The use and maintenance of this equipment is beyond the scope of this specification.1.3 This specification does not cover multiple section or extendable section clampsticks.1.4 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only.The following safety hazards caveat pertains to Section 9 only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Live Line and Measuring Telescoping Tools

IEEE Std C135.1-1999 架空线结构用镀锌钢螺栓和螺母

This standard covers the requirements for inch-based carriage bolts, machine bolts, double-arming bolts, and double-end bolts and nuts commonly used in overhead line construction and where the applied load is primarily a tensile load. Where shear loads are of importance, reference should be made to ASTM A394-93. 1 Metric bolts and nuts are not covered by this standard.

Zinc-coated steel bolts and nuts for overhead line construction

NF C68-302:1999 电气设备的公制电缆密封垫

Metric cable glands for electrical installations.

IEC 61235:1993/COR1:1999 带电作业.电工用绝缘空心管

This is Technical Corrigendum 1 to IEC 61235-1993 (Live working - Insulating hollow tubes for electrical purposes)

Live working; insulating hollow tubes for electrical purposes

IEC 61243-2:1995/COR2:1999 带电作业.电压检测器.第2部分:1 kV-36 kV交流电压用电阻型.勘误表2

This standard is Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. Corrigendum 2

Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.; Corrigendum 2

IEC 61057:1991/COR1:1999 带电作业用带绝缘臂的高架装置

This is Technical Corrigendum 1 to IEC 61057-1991 (Aerial devices with insulating boom used for live working)

Aerial devices with insulating boom used for live working

IEC 61230/COR1:1999 带电作业.便携式接地或接地并短路设备

This is Technical Corrigendum 1 to IEC 61230-1993 (Live working - Portable equipment for earthing or earthing and short-circuiting)

Live working; portable equipment for earthing or earthing and short-circuiting

IEC 61236/COR1:1999 带电作业用滑动座架、硬梯及附件

This is Technical Corrigendum 1 to IEC 61236-1993 (Saddles,pole clamps(stick clamps) and accessories for live working)

Saddles, pole clamps (stick clamps) and accessories for live working

JIS C 8340:1999 钢性金属接线盒和盒盖

この規格は, JIS C 8305に規定士る鋼製電線管に用いる金属製のポックス及びポックスカバー(以下,附属品という。)について規定する。

Boxes and box covers for rigid metal conduits

JIS C 8330:1999 刚性金属导管配件

この規格は，JIS C 8305に規定する鋼製電線管に用いる附属品（以下,附属品という。）について規定する。

Fittings for rigid metal conduits

JIS C 8350:1999 挠性金属导管的配件

この規格は，JIS C 8309に規定する電線管に用いるコネクタ及びコンビネーションカッブリングについて規定する。

Fittings for pliable metal conduits

IEC TR2 61911:1998 带电作业.配电线路导体的安装.架线设备及附件

Live working - Installation of distribution line conductors - Stringing equipment and accessory items

IEC 61243-3:1998 带电作业 电压检测器 第3部分:两极低压型

This part of IEC 61243 is applicable to two-pole voltage detectors to be used on electrical systems for nominal voltages not exceeding 1000 V a.c. and/or 1500 V d.c. and below 500 Hz (nominal frequencies). The detector types are classified as follows: voltage class A: up to and including 500 V a.c./750 V d.c.; voltage class B: up to and including 1000 V a.c./1500 V d.c. This part of IEC 61243 also applies to supplementary functions such as phase indications, rotating field indications, and continuity checks (see annex E). Furthermore, it applies to accessories such as crocodile clips, detachable leads and contact electrode extensions. Unless otherwise specified, all the voltages defined in this standard refer to phase-to-phase voltages of three-phase systems. Detectors may be used in other than three-phase systems, then the applicable phase-to-phase or phase-to-earth (ground) voltages are to be used to determine the operating voltage. Low-voltage detectors covered by this standard are not intended to provide measurement of absolute values. Measuring devices are excluded from this standard. NOTE - The requirements for measuring devices are specified in IEC 61010-1 and IEC 61010-2-031.

Live working - Voltage detectors - Part 3: Two-pole low-voltage type

IEEE Std C135.63-1998 架空线结构用带肩线膨胀链

Dimensions and strength requirements are covered for shoulder live line extension links used in overhead transmission and distribution hardware.

Shoulder live line extension links for overhead line construction

DL/T 646-1998 输电线路钢管杆制造技术条件

Technical specification of manufacturing steel transmission pole structures

DL/T 636-1997 带电作业用500kV四分裂导线飞车

500kV four conductors per phase bicycle for live working

ANSI/IEEE C135.63:1998 架空线结构用带电肩线膨胀链的标准

Dimensions and strength requirements for shoulder live line extension links used in overhead transmission and distribution hardware are covered.

Standard for Shoulder Live Line Extension Links for Overhead Line Construction