K49 避雷器 标准查询与下载

JB/T 9671-2006 避雷器安装尺寸与接线端子尺寸

本标准规定了避雷器的安装尺寸及线路端子的结构与主要尺寸。 本标准适用于电力系统和电气化铁道供电系统用额定电压为5kV～468kV的避雷针（瓷外套和复合外套）的安装尺寸和接线端子尺寸。 本标准不适用于封闭式组合电器中的避雷器及其他类型的避雷器。

Mounting dimensions and terminal dimensions for surge arresters

IEC 60099-4:2004/AMD1:2006 避雷器.第4部分:交流电系统用无间隙金属氧化物避雷器.修改件1

This is Amendment 1 to IEC 60099-4-2004 (Surge arresters - Part 4:Metal-oxide surge arresters without gaps for a.c. systems)

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems; Amendment 1

NF C17-100F4:2006 关于1997年12月NF C17-100标准的解读手册.

Interpretation manual for the December 1997 NF C17-100 standard.

PD CLC/TR 50469:2005 防雷系统.符号

This Technical Report specifies symbols for use in drawings for lightning protection systems If necessary, additional symbols may be used for other important elements of the object to be protected. These symbols should be simple and they have to be explained in a legend in the LPS design drawings. In case of an isolated protection system (see IEC 62305-1 and IEC 62305-3) this has to be stated in the LPS design drawings including required separation distances. In case of preparing a coloured kind of drawing, the colours should be used as follows: – building black, – lightning protection red, – metal sheets green, – metal structure blue.

Lightning protection systems — Symbols

NF C17-100F3:2005 关于1997年12月NF C17-100标准的解读手册.

Interpretation manual for the December 1997 NF C17-100 standard.

KS C IEC 60099-6:2005 避雷器.第6部分:额定电压等于或低于52kV的含有串联及并联间隙结构的避雷器

이 규격은 교류 전력 회로에서 전압 서지를 제한하기 위한 스파크 갭을 가지는 비선형 저항형

Surge arresters－Part 6：Surge arresters containing both series and parallel gapped structures－Rated 52 kV and less

JB/T 9672.2-2005 串联间隙金属氧化物避雷器.第2部分:35kV及以下交流系统用有串联间隙金属氧化物避雷器

本部分适用于为限制3kV～35kV交流电力系统过电压而设计的有串联间隙金属氧化物避雷器。 本部分对复合外套、浸入液体和其它特殊设计的避雷器在设计、试验和使用时应做特殊考虑，试验要求及试验方法应参照相应标准的规定。

Metal oxide surge arresters with series gaps Part 2: Metal oxide surge arresters with series gaps for a.c. systems of 35kV and below

UL 96-2005 避雷装置器件

1.1 These requirements cover lightning protection components for use in the installation of complete systems of lightning protection on buildings and structures. 1.2 These requirements do not cover the installation of lightning protection components. Products of this type are covered by the Standard for Installation Requirements for Lightning Protection Systems, UL 96A. 1.3 Lightning protection components are divided into three classes, according to their intended application as defined in 4.3 - 4.5. This new edition also includes the addition of provisions for solid strip to Class II conductor requirements, the deletion of requirements for chimney bands, and the replacement of lead requirements with tin coating.

UL Standard for Safety Lightning Protection Components Fifth Edition

JB/T 10497-2005 交流输电线路用复合外套有串联间隙金属氧化物避雷器

本标准规定了系统标称电压35kV～500kV交流输电线路用复合外套有串联间隙金属氧化物避雷器的技术要求、试验方法、检验规则等内容。 本标准适用于35kV～50OkV交流输电线路用限制雷电过电压的避雷器。

Polymeric housed metal oxide surge arresters with series gap for a.c. electric power transmission line

JB/T 8952-2005 交流系统用复合外套无间隙金属氧化物避雷器

本标准适用于为限制交流电力系统过电压而设计的复合外套无间隙金属氧化物避雷器。 本标准规定了额定电压468kV及以下复合外套无间隙金属氧化物避雷器(以下简称避雷器)的技术要求、试验方法、检验规则等内容。

Polymer-housed metal oxide surge arresters without gaps for a.c. systems

JB/T 10496-2005 交流三相组合式无间隙金属氧化物避雷器

本标准规定了额定电压51kV及以下瓷外套和复合外套三相组合式无间隙金属氧化物避雷器(以下简称瓷外套避雷器和复合外套避雷器)的技术要求、试验方法、检验规则等内容。 本标准适用于35kV及以下交流非有效接地系统，主要用于限制相-相和相-地操作过电压的避雷器。

Combination type metal-oxide surge arresters without gaps for the three-phase a.c. systems

NF C65-101:2005 避雷器.第4部分:交流电系统用无间隙金属氧化物避雷器

Surge arresters - Part 4 : metal-oxide surge arresters without gaps for a.c. systems.

BS EN 60099-4:2004 避雷器.交流电系统用无间隙金属氧化物避雷器

This part of IEC 60099 applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit voltage surges on a.c. power circuits.

Surge arresters - Metal-oxide surge arresters without gaps for a.c. systems

BS EN 60099-4:2004+A2:2009 避雷器.交流电系统用无间隙金属氧化物避雷器

This part of IEC 60099 applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit voltage surges on a.c. power circuits.

Surge arresters — Part 4: Metal-oxide surge arresters without gaps for a.c. systems

JB/T 10492-2004 交流无间隙金属氧化物避雷器用监测器

本标准适用于交流无间隙金属氧化物避雷器用监测器。 　　本标准规定了避雷器用监测器的技术要求、试验方法和检验规则等内容。

Monitors for metal oxide surge arresters without gaps in a.c. system

NRS 042-2004 电子设备的损坏性瞬变防护指南

Describes both the possible sources of transients and also the measures that can be implemented in order to make electronic equipment less vulnerable to these transients. Also covers surge protective devices and their associated circuitry, together with

Guide for the protection of electronic equipment against damaging transients

IEC 60099-4:2004 避雷器.第4部分:交流电系统用无间隙金属氧化物避雷器

Applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit voltage surges on a.c. power circuits.

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

NF C61-740F1:2004 2002年9月NF EN 61643-11号标准第61643-11 F1号说明书

September 2002 NF EN 61643-11 Standard No. 61643-11 F1 Instruction

IEC PAS 60099-7:2004 避雷器.第7部分:IEC出版物60099-1, 60099-4, 60099-6, 61643-1, 61643-12, 61643-21, 61643-311, 61643-321, 61643-331 and 61643-341的术语和定义词汇编

Provides a list of terms and definitions relative to IEC publications from IEC technical committee 37: Surge Arresters, and subcommittees 37A: Surge protective devices, and 37B: Surge protective components, current at the date of this publication.

Surge arresters - Part 7: Glossary of terms and definitions from IEC publications 60099-1, 60099-4, 60099-6, 61643-1, 61643-12, 61643-21, 61643-311, 61643-321, 61643-331 and 61643-341

IEC 60099-6:2002 避雷器.第6部分:额定电压等于或低于52kV的含有串联及并联间隙结构的避雷器

This part of IEC 60099 applies to non-linear metal-oxide resistor type surge arresters with spark gaps designed to limit voltage surges on a.c. power circuits. It applies to all metal-oxide surge arresters with gaps and housed in either porcelain or poly

Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures; Rated 52 kV and less