K80 电源综合 标准查询与下载

SANS 61204-3:2000 低压直流电源．第3部分：电磁兼容性(EMC)

Specifies electromagnetic compatibility (EMC) requirements for power supply units (PSUs) providing d.c. output(s) up to 200 V at a power level of up to 30 kW, operating from a.c. or d.c. source voltages of up to 600 V.

Low-voltage power supplies, d.c. output Part 3: Electromagnetic compatibility (EMC)

BS EN 50160:2000 公共配电系统的供电电压特性

This standard gives the main characteristics of the voltage at the customer's supply terminals in public low voltage and medium voltage electricity distribution systems under normal operating conditions. This standard gives the limits or values within which any customer can expect the voltage characteristics to remain, and does not describe the typical situation for a customer connected to a public supply network. NOTE: For the definitions of low and medium voltage see 1.3.7 and 1.3.8. The standard does not apply under abnormal operating conditions including the following: - conditions arising as a result of a fault or a temporary supply arrangement adopted to keep customers supplied during maintenance and construction work or to minimize the extent and duration of a loss of supply, - in case of non-compliance of a customer's installation or equipment with the relevant standards or with the technical requirements for connection of loads, established either by the public authorities or the electricity supplier including the limits for the emission of conducted disturbances, - in case of non-compliance of a generation installation with the relevant standards or with the technical requirements for interconnection with an electricity distribution system established either by the public authorities or the electricity supplier (e.g. embedded generation), - in exceptional situations outside the electricity supplier's control, in particular, · exceptional weather conditions and other natural disasters, · third party interference, · acts by public authorities, · industrial actions (subject to legal requirements), · force majeure, · power shortages resulting from external events. The voltage characteristics given in this standard are not intended to be used as electromagnetic compatibility (EMC) levels or user emission limits for conducted disturbances in public distribution systems. The voltage characteristics given in this standard are not intended to be used to specify requirements in equipment product standards, but should be considered. It should be especially noted that the performance of equipment might be impaired if it is subjected to supply conditions which are not taken into account in the equipment product standard. This standard may be superseded in total or in part by the terms of a contract between the individual customer and the electricity supplier.

Voltage characteristics of electricity supplied by public distribution systems

JB/T 56221-1999 高压静电除尘用整流设备 产品质量分等

本标准规定了高压静电除尘用整流设备产品质量等级。 本标准适用于高压静电除尘用整流设备产品质量分等及等级评定工作。

Product quality classification of rectifier equipment for high-voltage electrostatic dust removal

JB/T 4276-1999 变流器.产品包装技术条件

本标准规定了变流器产品包装的技术要求和验收规律则与试验方法。 本标准适用于国内销售的变流器产品的包装。

Technical specifications for converter packing

BS 4363:1998+A1:2013 施工和建筑工地降低压电源配电设备规格

This British Standard specifies the requirements for distribution assemblies for the control and distribution of electricity from a three-phase reduced low voltage a.c. system at declared voltage up to 110 V (63.5 V to earth) or a single phase system at declared voltage up to 110 V (55 V to earth), for use for the protection and control of electricity supplies on construction and building sites in the UK.

Specification for distribution assemblies for reduced low voltage electricity supplies for construction and building sites

CSA C22.2 No.204-M1984-1984(R2004) 电源隔离监视器

Power Isolation Monitor

DB62/T 517-1997 家用太阳能光伏电源

本标准规定了家用太阳能光伏电源的术语，产品分类，技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适宜于由单（多）晶硅太阳能电池组件。密封铅酸蓄电池、充放电控制器、逆变器等部分组成的一个独立供电的家用太阳能光伏电源。该“家用太阳能光伏电源”适用于家庭照明、电视机、收录机等功率在100W以下的家用电器，不适用于功率在100W以上的其他用电器具。

Home solar photovoltaic power supply

BS EN 61429:1997 二次电池和电池组带有国际回收符号 ISO 7000-1135 标记以及有关指令 93/86/EEC 和 91/157/EEC 的指示

This European Standard defines the conditions of utilization of the recycling symbol of the International Organization for Standardization (ISO) combined with the indication regarding EC directives associated with the chemical symbols indicating the electrochemical system of the battery. NOTE The term "battery" as used throughout this standard covers batteries constituted of several single cells as well as single cells distributed and used separately. In all cases cells have to be marked individually with the exception of those constituting a battery or a subassembly that cannot be dismantled. For example, traction batteries and stationary batteries should be marked on or near the type plate only. The object of this standard is to present recommendations concerning the size of the symbol and its location on the surface of the cells and batteries or on the packages of button cells.

Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC

WJ 2467-1997 自行高炮初级供电系统规范

Specifications for the primary power supply system of self-propelled antiaircraft guns

SJ 52278/1-1996 ER14250、ER34615型锂亚硫酰氯电池详细规范

Type ER14250、ER34615 batteries,non-rechargeable lithium thionyl chloride,detail specification for

SJ 20486-1995 镉镍全密封碱性单体蓄电池总规范

Nickel-cadmium alkaline rechargeable cells,hermetically sealed,general specification for

WJ 2270-1995 18mm微通道板近贴式象增强器用电源规范

Specification of power supply for 18mm microchannel board proximity image intensifier

WJ 2271-1995 25mm微通道板倒像式象增强器用电源规范

Specification of power supply for 25mm microchannel plate inverted image intensifier

UL 916-1994 能源管理设备

Energy management equipment

SJ/T 9167.20-1993 电池充电器

1.1 本标准规定的这些要求适用于，按美国《国家电气法规》规定的额定电压等于或小于600V，预定作为家用或商用给可充电电池充电用的电池充电器。 1.2 这些要求适用于供汽车电池或非汽车电池充电用的，在户内和户外使用的便携式和驻立式电池充电器，以及在户内使用的固定式电池充电器。 1.3 凡不能成其为一个完整装置的电池充电器，以及要取决于在最终产品内安装方式的电池充电器，是否符合本标准的要求，应按本标准的要求以及最终产品的标准来考核。 1、4 与驱动离心式点火泵的内燃机配用的电池充电器应按本标准的要求以及最终产品的适用要求来考核。 1.5 这些要求不适用于摩托艇或汽艇码头或其它水上产品应用的电池充电器(但预定要永久性安装在汽艇上的电池充电器除外)，也不适用火警信号设施用的电池充电器，或使用电池充电器的设备或系统。

Battery chargers

SJ/T 9167.6-1993 电源

1.1 本标准适用于额定电压等于或小于600V交直流的便携式、驻立式和固定式电源，而这些电源预定用于符合国家电气法规的地方。 1.2 本标准适用于特殊用途的电源。如供给一些家用电器、学校试验室、电话和有关通信设备、电子琴、工业设备、阴极保护设备；电源--电池充电器组件，以及包括换流器的工业设备，这些电源分为额定值等于或小于10kVA和大于10kVA两类。 1.3 组装完的以及在最终产品内安装的电源，应按本标准的要求和最终产品的标准进行检测。 1.4 应按本标准和电池充电器的有关要求对电源--电池充电器组件进行检测。 1.5 本标准不适用于防火保护或防盗保护的警报系统，静电空气吸尘器，游览车辆，商业或工业实验室设备所用电源；也不适用于其中包含有电源的电气装置或系统所用的电源。 1.6 本标准不涉及电源对它们所连接的某一设备或系统所产生的影响。 1.7 构成产品的特征、性能、部件、材料或系统与新修订的标准不同，且该产品涉及着火、电击危险或人身安全时，应对该产品按元件和最终产品特性再进行评价，以确保达到本标准原来所预期供用户使用该产品的安全等级。

Power supplies

SANS 60478-4:1976 直流输出稳压电源.第4部分:除去射频干扰外的试验

Sets forth suggested procedures by which certain performance characteristics associated with voltage-stabilized or current-stabilized power supplies can be measured. Methods outlined are not the only way of conducting each measurement, but represent a reliable means of obtaining data against which other test procedures may be judged. An attempt has been made to minimize the need for specialized equipment, and no specific instruments are recommended.

Stabilized power supplies, d.c. output Part 4: Tests other than radio-frequency interference

JB/T 5778-1991 高频感应加热电源装置输出功率.测量方法

本标准规定了高频感应加热电源装置(简称电源装置)输出功率的测量方法。 本标准适用于高频振荡器的输出频率高于10kHz用于表面与局部加热淬火、透热、熔炼和焊接等各种感应加热电源装置输出功率的测量。

Output power of power supply unit of high-frequency induction heating equipments Measurement method

IEC 61011-1/AMD1:1991 第1次修改

1st revision

IEC 61011-2/AMD1:1991 第1次修改

1st revision