共找到 613 条与 化学电源 相关的标准,共 41 页
Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (IEC 62282-3-201:2013); German version EN 62282-3-201:2013
Safety of primary batteries with aqueous electrolyte
Nanomanufacturing. Key control characteristics. Cathode nanomaterials for lithium ion batteries. Electrochemical characterisation, 2-electrode cell method
Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method
Fuel cell technologies.Part 6-300: Micro fuel cell power systems.Fuel cartridge interchangeability (IEC 62282-6-300:2012); German version EN 62282-6-300:2013
Fuel cell technologies. Part 3-100. Stationary fuel cell power systems. Safety
Fuel cell technologies. Part 3-200. Stationary fuel cell power systems. Performance test method
Single cell and stack-performance test methods for solid oxide fuel cell (SOFC)
이 표준은 PEFC 단위전지의 조립, 평가 장치, 측정 기기 및 측정방법, 성능 시험방법, 그리고 시험결과 보고서에 대해 다룬다.이 표준에서는 다음 각 사안들에 대한 평가를 위해 사용된다.a) PEFC용 막전극 접합체(MEA)의 성능b) PEFC의 다른 부품들의 재료 또는 구조, 혹은c) 연료전지 성능에 미치는 연료 및/또는 공기 중 불순물의 영향
FUEL CELL TECHNOLOGIES – Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
Fuel cell technologies - Part 3-201 : stationary fuel cell power systems - Performance test methods for small fuel cell power systems
Fuel cell technologies - Part 6-300 : micro fuel cell power systems - Fuel catridge interchangeability
이 표준은 연료전지 모듈의 안전 및 성능을 위한 최소 요구조건을 규정한다. 이 표준은 다음의 전해질 화학을 가지고 있는 연료전지 모듈에 적용한다.― 알카라인― 수소이온 교환막(직접 메탄올 연료전지 포함)― 인산― 용융 탄산염― 고체 산화물― 염의 수용액연료전지 모듈은 내용물을 포함하거나 또는 포함하지 않을 수 있으며, 가압조건 또는 대기압 조건에서 운전할 수 있다.이 표준은 사람에게 해를 입힐 수 있으며 연료전지 모듈 외부에 손상을 입힐 수 있는 조건만을 다루고 있다. 만일 연료전지 모듈 외부에 어떠한 해나 손상을 초래하지 않을지라도, 연료전지 모듈 내부에 대한 손상 방지법은 이 표준에서 언급하고 있지 않다.이 요구사항은 특정 적용에 요구되는 연료전지 모듈을 포함하는 장비의 또 다른 표준에 의해 대체될수도 있다.이 표준은 수송용에는 적용되지 않는다.이 표준은 기술적 진보를 제한하거나 방해하기 위한 것이 아니다. 이 표준의 요구사항과 상이한 재료들을 채택 또는 제작형태를 가지는 기기는 이 요구조건에 따라 조사와 시험을 받을 수 있다. 그리고 그러한 기기들이 만약 실질적으로 동등하다고 판단되면 이 표준에 적합한 것으로 고려할 수 있다.연료전지 모듈은 최종 제품의 구성품이다. 이러한 제품은 적절한 최종 제품 안전 요구사항에 대한평가가 요구된다.이 표준은 연료전지 모듈의 직류출력
Fuel cell technologies-Part 2:Fuel cell modules
This part of IEC 62282 provides uniform terminology in the forms of diagrams, definitions and equations related to fuel cell technologies in all applications including but not limited to stationary power, transportation, portable power and micro power applications.
Fuel cell technologies.Part 1: Terminology
Electrolyte test method for vanadium redox flow battery
Test method of bipolar plate for vanadium redox flow battery
Fuel cell technologies. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
本标准适用于以六氟磷酸锂为主要电解质加工而成的不同溶剂体系的二次锂离子电池电解液。
Secondary lithium ion battery electrolyte
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
Safety of primary and secondary lithium cells and batteries during transport
Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010/A1:2012); German version EN 62282-6-100:2010/A1:2012
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号