K84 蓄电能装置 标准查询与下载

IEC 60623:2017 装碱性或其他非酸性电解质的蓄电池和蓄电池组 开口镉镍方形可充电单体电池

IEC 60623 specifies marking, designation, dimensions, tests and requirements for vented nickel-cadmium prismatic secondary single cells. NOTE In this context, "prismatic" refers to cells having rectangular sides and base. When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this document, the former takes precedence.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells

BS EN 62877-1:2016 开口型铅酸蓄电池的电解质和水. 电解质的要求

Electrolyte and water for vented lead acid accumulators. Requirements for electrolyte

BS EN 62877-2:2016 开口型铅酸蓄电池的电解质和水. 水的要求

Electrolyte and water for vented lead acid accumulators. Requirements for water

IEC 62281:2016 运输途中原电池和二次锂电池及蓄电池组的安全性

This International Standard specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and batteries to ensure their safety during transport other than for recycling or disposal. Requirements specified in this standard do not apply in those cases where special provisions given in the relevant regulations, listed in 7.3, provide exemptions. NOTE Different standards may apply for lithium-ion traction battery systems used for electrically propelled road vehicles.

Safety of primary and secondary lithium cells and batteries during transport

BS EN 62660-3:2016 电动道路车辆驱动用锂离子蓄电池. 安全要求

Secondary lithium-ion cells for the propulsion of electric road vehicles. Safety requirements

DIN 91252:2016 电动道路车辆.蓄电池系统.锂离子电池设计规范.德文和英文版本

Electrically propelled road vehicles - Battery systems - Design specifications for Lithium-Ion battery cells; Text in German and English

WB/T 1061-2016 废蓄电池回收管理规范

本标准规定了废蓄电池的分类、收集、运输及贮存等回收管理要求。 本标准适用于废蓄电池的回收服务与管理。

Management specification for waste secondary battery recycling

BS EN 50604-1:2016 轻型EV(电动车辆)应用的二次锂电池. 通用安全要求和试验方法

Secondary lithium batteries for light EV (electric vehicle) applications. General safety requirements and test methods

NB/T 42083-2016 电力系统用固定型铅酸蓄电池安全运行使用技术规范

Technical specifications for safe operation and use of stationary lead-acid batteries for power systems

SN/T 4548-2016 出口锂电池和电池组包装检验规程

Export Lithium Battery and Battery Pack Packaging Inspection Regulations

SN/T 4550-2016 进出口碱性及非酸性二次电池安全性能检测方法

Safety performance testing methods for import and export of alkaline and non-acid secondary batteries

IEC 60335-2-29:2016 家用和类似用途电器.安全性.第2-29部分:蓄电池充电器的特殊要求

This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of electric battery chargers for household and similar use having an output not exceeding 120 V ripple-free direct current, their rated voltage being not more than 250 V. Battery chargers intended for charging batteries in a household end use application outside the scope of the IEC 60335 series of standards are within the scope of this standard. Requirements for battery chargers for use by children at least 8 years old without supervision are given in Annex AA. Battery chargers not intended for normal household use, but which nevertheless may be a source of danger to the public, such as battery chargers intended for use in garages, shops, light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose; physical, sensory or mental capabilities; or; lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; children playing with the appliance. NOTE 101 Attention is drawn to the fact that; for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 102 This standard does not apply to; built-in battery chargers, except those for installing in caravans and similar vehicles; battery chargers that are part of an appliance, the battery of which is not accessible to the user; battery chargers intended exclusively for industrial purposes; battery chargers intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); battery chargers for emergency lighting (IEC 60598-2-22); supply units for electronic equipment.

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

BS EN 61982-4:2016 电动道路车辆驱动用蓄电池 (锂电池除外). 镍氢电池组和模块的安全要求

Secondary batteries (except lithium) for the propulsion of electric road vehicles. Safety requirements of nickel-metal hydride cells and modules

SJ/T 10484-2016 铁路客车用镉镍蓄电池（组）规范

Specification for cadmium-nickel batteries (packs) for railway passenger cars

JB/T 12666-2016 起停用铅酸蓄电池 技术条件

Technical conditions for starting and stopping the use of lead-acid batteries

IEC 62877-1:2016 用于排气式铅酸蓄电池的电解液和水 第1部分：电解液要求

This part of IEC 62877 applies to electrolyte and their components used for filling vented lead-acid batteries, for example dry charged cells or batteries, and for electrolyte replacement or electrolyte density adjustment of batteries in operation. This international standard defines the composition, purity and properties of electrolyte to be applied where specific instructions from the battery manufacturer are not available.

Electrolyte and water for vented lead acid accumulators - Part 1: Requirements for electrolyte

IEC 62877-2:2016 开口型铅酸蓄电池的电解质和水. 第2部分: 水的要求

This part of IEC 62877 applies to water for use with vented lead-acid cells and batteries, i.e. water for preparation of electrolyte and for topping up cells or batteries. The purity of refilling water has to meet higher requirements compared to filling electrolyte, because the impurities in the operating electrolyte will be gradually increased by regular addition of water. This international standard lays down requirements of the composition, purity and properties of water in the absence of specific recommendations from the manufacturer.

Electrolyte and water for vented lead acid accumulators - Part 2: Requirements for water

BS EN 50342-6:2015 起动用铅酸蓄电池. 微循环装置用蓄电池

Lead-acid starter batteries. Batteries for Micro-Cycle Applications

BS EN 50342-1:2015 铅酸起动蓄电池组.一般要求和试验方法

Lead-acid starter batteries. General requirements and methods of test

DB44/T 1776-2015 电动汽车用锂离子动力电池系统环境适应性试验方法

本标准规定了电动汽车用锂离子动力电池系统的环境适应性试验方法中的术语和定义、通用要求、耐气候环境试验、耐机械环境试验、耐化学环境试验和耐电磁环境试验方法。 本标准适用于电动汽车用锂离子动力电池系统。

Environmental adaptability test method for lithium-ion power battery system for electric vehicles