L63 计算机外围设备 标准查询与下载

ASTM F1232-98(2003) 一次性薄膜色带测试码模式的形成

The character yield of a ribbon is affected by many factors including the printer/typewriter design and ribbon cartridge design. The end user may wish to evaluate these different machine and ribbon designs to determine the estimated cost of various systems over the anticipated useful life of the equipment. For example, the lowest cost machine may not be the most economical system when the cost per character (cost of supplies) is factored in as part of its total life time cost.1.1 This practice covers the description and method of use of a test pattern for evaluating character yield of a single-pass typewriter or printer ribbon cartridge under continuous printing conditions.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Generating a Test Pattern for Single-Pass Film Ribbons

ASTM F1232-98 一次性薄膜色带测试码模式的形成

1.1 This practice covers the description and method of use of a test pattern for evaluating character yield of a single-pass typewriter or printer ribbon cartridge under continuous printing conditions. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Generating a Test Pattern for Single-Pass Film Ribbons

ASTM F1945-98 测定曝露于室内荧光照明下的喷墨打印的耐晒性的标准操作规程

1.1 This practice covers an accelerated procedure intended to determine the lightfastness of ink jet prints in office environments where overhead fluorescent light is used for illumination. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.

Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting

ASTM F1946-98 测定曝露于室内荧光照明和滤窗日光下的喷墨打印的耐晒性的标准操作规程

1.1 This practice covers an accelerated procedure intended to determine the lightfastness of ink jet prints in office environments where overhead fluorescent light and window-filtered daylight is used for illumination. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.

Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight

ASTM F1942-98 创建测定喷墨打印机用成像供给的油墨成品的试验目标的标准操作规程

1.1 This practice describes a method for creating test targets containing varying percentages of area coverage for use in determining the yield of the supplies used by liquid and solid ink jet printers. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Creating Test Targets for Determining the Ink Yield of the Imaging Supplies Used in Ink Jet Printers

ASTM F1942-98(2003) 创建测定喷墨打印机用成像供给的油墨成品的试验目标的标准操作规程

Test targets where the percentage of area coverage has been predetermined are not readily available from commercial sources. Moreover, it is beyond the ability of most users to verify if indeed, the commercially-available test targets contain the advertised area coverage. This procedure allows the user to easily create test targets, using commercially available PC software, which can be easily verified for percentage of area coverage and can provide reproducible interlaboratory results.1.1 This practice describes a method for creating test targets containing varying percentages of area coverage for use in determining the yield of the supplies used by liquid and solid ink jet printers. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Creating Test Targets for Determining the Ink Yield of the Imaging Supplies Used in Ink Jet Printers

ASTM F1856-98 测定打印机盒式存储器的调色剂使用的标准操作规程

1.1 This practice covers a procedure to determine the weight of toner used for printing a single page derived from an electrophotographic process. The practice uses a printer text target specifically developed for each printer for a page coverage of 5 +/- 0.5% of the printable area. This practice requires specific tools and skills for disassembling and reassembling printer cartridges. 1.2 The values stated in inch-pound units are to be regarded as the standards. The SI units given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining Toner Usage for Printer Cartridges

ASTM F1944-98(2003) 测定由喷墨打印机产生的文本、行和实地版输出质量的标准操作规程

This practice may be used to determine the image quality of text, line- and solid-fill images produced by ink jet printers. This practice may be used to evaluate the image quality of black, process-black and primary ink, single-color images produced by ink jet printers. This practice may be used to evaluate the interaction between ink(s) and various substrate types as it relates to image quality. This procedure may be used for substrate (for example, paper, paperboard, film, labels, fabric, envelopes), printer and ink specifications-acceptance, research and product development. Although this practice is suitable for the evaluation of all printer, ink and substrate combinations, it is not intended for use in the evaluation of color fidelity or continuous-tones.1.1 This practice describes a procedure that can be used to determine the image quality of text, line- and solid-fill images produced by ink jet printers. 1.2 This practice can be used to evaluate black, process-black and primary ink, single-color images produced by ink jet printers. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Quality of the Text, Line- and Solid-Fill Output Produced by Ink Jet Printers

KS X 5019-1997 信息技术.微处理机系统.VICbus.电缆总线母线

IEC 821 버스(VME버스)와 같은 백플레인(backplane) 버스에 기반한 고성능,

INFORMATION TECHNOLOGY - MICROPROCESSOR SYSTEMS - VICbus - INTER-CRATE CABLE BUS

KS C 9708-1997 诊断用磁共振设备的幻象

이 규격은 진단용 자기 공명장치의 일상 점검에 사용하는 팬텀에 대하여 규정한다.

Phantoms for magnetic resonance equipment for medical diagnosis

DD ENV 12647-1997 条形码.条形码验证机的试验规范

Bar coding. Test specifications for bar code verifiers

DD ENV 12648-1997 条形码.条形码打印机的试验规范

Bar coding. Test specifications for bar code printers

DD ENV 12646-1997 条形码.条形码的扫描仪和译码器的试验规范

Bar coding. Test specifications for bar code scanners and decoders

SJ 11115-1997 光学标记阅读机通用规范

Generic specification for optical mark reader

ANSI/EIA 633.34:1997 CE母线红外物理层一致性

Specifies the tests necessary to determine conformance of a Node's IR Physical Layer to IS-60.

CEBus Infrared Physical Layer Conformance

ANSI/EIA 633.32:1997 CE母线绞线对物理层一致性

Specifies the tests necessary to determine conformance of a device's Twisted Pair Physical Layer to IS-60.

CEBus Twisted Pair Physical Layer Conformance

AIIM TR15-1997 图像捕捉文件的准备,规划处理

This recommended practice describes operational and quality control guidelines for alphanumeric computeroutput microfilm recorders and microforms using black-and -white film as well as duplicates made from such filmes.

Planning Considerations Addressing Preparation of Documents for Image Capture

ANSI/EIA 600.43:1997 结分点逻辑链控制亚层

This part of EIA 600 defines the Node Logical Link Control Protocol. EIA 600 is also referred to as the CEBus standard. this part to be published as EIA 600.43

Node Logical Link Control Sublayer

ANSI/EIA 600.42:1997 结点中速存取控制亚层

This part of EIA 600 describes the Node Medium Access Control Protocol. EIA 600 is also referred to as the CEBus standard. This part to be published as EIa 600.42.

Node Medium Access Control Sublayer

ANSI/EIA 600.41:1997 数据链层的描述

This part of EIA 600 describes the behavior of the Node Data Link Layer. To be published as EIA 600.41. EIA 600 is also referred to as the CEBus standard.

Description of the Data Link Layer